Control types for @turbot/azure-monitor

• Azure > Monitor > Action Group > Active
• Azure > Monitor > Action Group > Approved
• Azure > Monitor > Action Group > CMDB
• Azure > Monitor > Action Group > Configured
• Azure > Monitor > Action Group > Discovery
• Azure > Monitor > Alerts > Active
• Azure > Monitor > Alerts > Approved
• Azure > Monitor > Alerts > CMDB
• Azure > Monitor > Alerts > Configured
• Azure > Monitor > Alerts > Discovery
• Azure > Monitor > Log Profile > Active
• Azure > Monitor > Log Profile > Approved
• Azure > Monitor > Log Profile > CMDB
• Azure > Monitor > Log Profile > Discovery
• Azure > Monitor > Stack

Azure > Monitor > Action Group > Active

Take an action when an Azure Monitor action group is not active based on the
Azure > Monitor > Action Group > Active > * policies.

The Active control determines whether the resource is in active use, and if not, has
the ability to delete / cleanup the resource. When running an automated compliance
environment, it's common to end up with a wide range of alarms that are difficult
and time consuming to clear. The Active control brings automated, well-defined
control to this process.

The Active control checks the status of all defined Active policies for the
resource (Azure > Monitor > Action Group > Active > *),
raises an alarm, and takes the defined enforcement action. Each Active
sub-policy can calculate a status of active, inactive or skipped. Generally,
if the resource appears to be Active for any reason it will be considered Active.

Note: In contrast with Approved, where if the resource appears to be Unapproved
for any reason it will be considered Unapproved.

See Active for more information.

Azure > Monitor > Action Group > Approved

Take an action when an Azure Monitor action group is not approved based on Azure > Monitor > Action Group > Approved > * policies.

The Approved control checks the status of the defined Approved sub-policies for the resource. If the resource is not approved according to any of these policies, this control raises an alarm and takes the defined enforcement action.

For any enforcement actions that specify if new, e.g., Enforce: Delete unapproved if new, this control will only take the enforcement actions for resources created within the last 60 minutes.

See Approved for more information.

Azure > Monitor > Action Group > CMDB

Record and synchronize details for the Azure Monitor action group into the CMDB.

The CMDB control is
responsible for populating and updating all the attributes for that
resource type in the Guardrails CMDB.

Note: If CMDB is set to Skip for a resource, then it will not be added
to the CMDB, and no controls that target it will run.

Azure > Monitor > Action Group > Configured

Maintain Azure > Monitor > Action Group configuration.

Note: If the resource is managed by another stack, then the Skip/Check/Enforce values here are ignored
and inherit from the stack that owns it.

Azure > Monitor > Action Group > Discovery

Discover all Azure Monitor action group resources and add them to the CMDB.

The Discovery control is responsible for finding resources of a specific type. It periodically searches for new resources and saves them to the CMDB. Once discovered, resources are then responsible for tracking changes to themselves through the CMDB control.

Azure > Monitor > Alerts > Active

Take an action when an Azure Monitor alerts is not active based on the
Azure > Monitor > Alerts > Active > * policies.

The Active control determines whether the resource is in active use, and if not, has
the ability to delete / cleanup the resource. When running an automated compliance
environment, it's common to end up with a wide range of alarms that are difficult
and time consuming to clear. The Active control brings automated, well-defined
control to this process.

The Active control checks the status of all defined Active policies for the
resource (Azure > Monitor > Alerts > Active > *),
raises an alarm, and takes the defined enforcement action. Each Active
sub-policy can calculate a status of active, inactive or skipped. Generally,
if the resource appears to be Active for any reason it will be considered Active.

Note: In contrast with Approved, where if the resource appears to be Unapproved
for any reason it will be considered Unapproved.

See Active for more information.

Azure > Monitor > Alerts > Approved

Take an action when an Azure Monitor alerts is not approved based on Azure > Monitor > Alerts > Approved > * policies.

The Approved control checks the status of the defined Approved sub-policies for the resource. If the resource is not approved according to any of these policies, this control raises an alarm and takes the defined enforcement action.

For any enforcement actions that specify if new, e.g., Enforce: Delete unapproved if new, this control will only take the enforcement actions for resources created within the last 60 minutes.

See Approved for more information.

Azure > Monitor > Alerts > CMDB

Record and synchronize details for the Azure Monitor alerts into the CMDB.

The CMDB control is
responsible for populating and updating all the attributes for that
resource type in the Guardrails CMDB.

Note: If CMDB is set to Skip for a resource, then it will not be added
to the CMDB, and no controls that target it will run.

Azure > Monitor > Alerts > Configured

Maintain monitor alerts configuration

Azure > Monitor > Alerts > Discovery

Discover all Azure Monitor alerts resources and add them to the CMDB.

The Discovery control is responsible for finding resources of a specific type. It periodically searches for new resources and saves them to the CMDB. Once discovered, resources are then responsible for tracking changes to themselves through the CMDB control.

Azure > Monitor > Log Profile > Active

Take an action when an Azure Monitor log profile is not active based on the
Azure > Monitor > Log Profile > Active > * policies.

The Active control determines whether the resource is in active use, and if not, has
the ability to delete / cleanup the resource. When running an automated compliance
environment, it's common to end up with a wide range of alarms that are difficult
and time consuming to clear. The Active control brings automated, well-defined
control to this process.

The Active control checks the status of all defined Active policies for the
resource (Azure > Monitor > Log Profile > Active > *),
raises an alarm, and takes the defined enforcement action. Each Active
sub-policy can calculate a status of active, inactive or skipped. Generally,
if the resource appears to be Active for any reason it will be considered Active.

Note: In contrast with Approved, where if the resource appears to be Unapproved
for any reason it will be considered Unapproved.

See Active for more information.

Azure > Monitor > Log Profile > Approved

Take an action when an Azure Monitor log profile is not approved based on Azure > Monitor > Log Profile > Approved > * policies.

The Approved control checks the status of the defined Approved sub-policies for the resource. If the resource is not approved according to any of these policies, this control raises an alarm and takes the defined enforcement action.

For any enforcement actions that specify if new, e.g., Enforce: Delete unapproved if new, this control will only take the enforcement actions for resources created within the last 60 minutes.

See Approved for more information.

Azure > Monitor > Log Profile > CMDB

Record and synchronize details for the Azure Monitor log profile into the CMDB.

The CMDB control is
responsible for populating and updating all the attributes for that
resource type in the Guardrails CMDB.

Note: If CMDB is set to Skip for a resource, then it will not be added
to the CMDB, and no controls that target it will run.

Azure > Monitor > Log Profile > Discovery

Discover all Azure Monitor log profile resources and add them to the CMDB.

The Discovery control is responsible for finding resources of a specific type. It periodically searches for new resources and saves them to the CMDB. Once discovered, resources are then responsible for tracking changes to themselves through the CMDB control.

Azure > Monitor > Stack

Configure a custom stack on Azure, per the custom Stack > Source.

A Guardrails Stack is a set of resources configured by Guardrails, as specified
via Terraform source. Stacks are responsible for the creation and deletion
of multiple resources. Once created, stack resources are responsible for
configuring themselves from the stack source via their Configured control.