Product logo
DocsBlogPricing

Policy types for @turbot/aws-shield

AWS > Shield > API Enabled

Configure whether the AWS Shield API is enabled.

Note: Disabling the service disables the API for ALL users and roles, and Turbot will have no access to the API.

URI
tmod:@turbot/aws-shield#/policy/types/shieldApiEnabled
Category
Parent
Targets
Valid Value
[
  "Enabled",
  "Disabled",
  "Enabled if AWS > Shield > Enabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Enabled",
    "Disabled",
    "Enabled if AWS > Shield > Enabled"
  ],
  "default": "Enabled"
}

AWS > Shield > Enabled

Configure whether the AWS Shield service is enabled. This will only affect Turbot managed User Roles and will allow the Turbot managed user to access AWS Shield service.

  • Enabled policy allows Turbot managed users to perform all the actions for the service
  • Enabled: Metadata Only policy allows Turbot managed users to perform only the metadata level actions for the service (like describe*, list*)

Note:

  • Disabled policy disables the service but does NOT disable the API for Turbot or SuperUsers
  • All the resource data stored in the Turbot CMDB is considered to be metadata
  • For more information related to permissions and grant levels, please check the documentation
URI
tmod:@turbot/aws-shield#/policy/types/shieldEnabled
Category
Parent
Targets
Valid Value
[
  "Enabled",
  "Enabled: Metadata Only",
  "Disabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Enabled",
    "Enabled: Metadata Only",
    "Disabled"
  ],
  "example": [
    "Enabled"
  ],
  "default": "Disabled"
}

AWS > Shield > Permissions

Configure whether permissions policies are in effect for AWS Shield.

This setting does not affect account level permissions (AWS/Admin, AWS/Owner, etc)

Note: The behavior of this policy depends on the value of AWS > Permissions.

URI
tmod:@turbot/aws-shield#/policy/types/shieldPermissions
Category
Parent
Targets
Valid Value
[
  "Enabled",
  "Disabled",
  "Enabled if AWS > Shield > Enabled & AWS > Shield > API Enabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Enabled",
    "Disabled",
    "Enabled if AWS > Shield > Enabled & AWS > Shield > API Enabled"
  ],
  "example": [
    "Enabled"
  ],
  "default": "Enabled if AWS > Shield > Enabled & AWS > Shield > API Enabled"
}

AWS > Shield > Permissions > Levels

Define the permissions levels that can be used to grant access to an AWS account. Permissions levels defined will appear in the UI to assign access to Turbot users. This policy provides a default for Permissions > Levels in each service, however you can explicitly override the setting for each service if desired

URI
tmod:@turbot/aws-shield#/policy/types/shieldPermissionsLevels
Category
Parent
Targets
Default Template Input
[
  "{\n  item: account {\n    turbot{\n      id\n    }\n  }\n}\n",
  "{\n  availableLevels: policyValues(filter:\"policyTypeLevel:self resourceId:{{ $.item.turbot.id }} policyType:'tmod:@turbot/aws-iam#/policy/types/permissionsLevelsDefault'\") {\n    items {\n      value\n    }\n  }\n}\n"
]
Default Template
"{% if $.availableLevels.items[0].value | length == 0 %} [] {% endif %}{% for item in $.availableLevels.items[0].value %}- {{ item }}\n{% endfor %}"
Schema
{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "Metadata",
      "ReadOnly",
      "Operator",
      "Admin",
      "Owner"
    ]
  }
}

AWS > Shield > Permissions > Levels > Modifiers

A map of AWS API to Turbot Permission Level used to customize Turbot's standard permissions. You can add, remove or redefine the mapping of AWS API operations to Turbot permissions levels here.

Note: Modifiers are cumulative - if you add a permission to the Metadata level, it is also added to ReadOnly, Operator and Admin. Modifier policies set here apply ONLY to the AWS level

example:
  - "glacier:createvault": admin
  - "glacier:ListVaults": metadata
  - "s3:DeleteBucket": none
URI
tmod:@turbot/aws-shield#/policy/types/shieldPermissionsLevelsModifiers
Category
Parent
Targets
Schema

AWS > Shield > Permissions > Lockdown

URI
tmod:@turbot/aws-shield#/policy/types/shieldPermissionsLockdown
Category
Parent
Targets

AWS > Shield > Permissions > Lockdown > API Boundary

Configure whether the AWS shield API is enabled for all users and roles in turbot-managed boundary policies.

Note: Disabling the service disables the API for ALL users and roles, and Turbot will have no access to the API.

URI
tmod:@turbot/aws-shield#/policy/types/shieldPermissionsLockdownApiBoundary
Category
Parent
Targets
Valid Value
[
  "Enabled if AWS > Shield > API Enabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Enabled if AWS > Shield > API Enabled"
  ],
  "example": [
    "Enabled if AWS > Shield > API Enabled"
  ],
  "default": "Enabled if AWS > Shield > API Enabled"
}

AWS > Shield > Protection > Active

Determine the action to take when an AWS Shield protection, based on the AWS > Shield > Protection > Active > * policies.

The control determines whether the resource is in active use, and if not, has the ability to delete / cleanup the resource. When running an automated compliance environment, it's common to end up with a wide range of alarms that are difficult and time consuming to clear. The Active control brings automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the resource (AWS > Shield > Protection > Active > *), raises an alarm, and takes the defined enforcement action. Each Active sub-policy can calculate a status of active, inactive or skipped. Generally, if the resource appears to be Active for any reason it will be considered Active. Note the contrast with Approved, where if the resource appears to be Unapproved for any reason it will be considered Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-shield#/policy/types/protectionActive
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Check: Active",
  "Enforce: Delete inactive with 1 day warning",
  "Enforce: Delete inactive with 3 days warning",
  "Enforce: Delete inactive with 7 days warning",
  "Enforce: Delete inactive with 14 days warning",
  "Enforce: Delete inactive with 30 days warning",
  "Enforce: Delete inactive with 60 days warning",
  "Enforce: Delete inactive with 90 days warning",
  "Enforce: Delete inactive with 180 days warning",
  "Enforce: Delete inactive with 365 days warning"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Active",
    "Enforce: Delete inactive with 1 day warning",
    "Enforce: Delete inactive with 3 days warning",
    "Enforce: Delete inactive with 7 days warning",
    "Enforce: Delete inactive with 14 days warning",
    "Enforce: Delete inactive with 30 days warning",
    "Enforce: Delete inactive with 60 days warning",
    "Enforce: Delete inactive with 90 days warning",
    "Enforce: Delete inactive with 180 days warning",
    "Enforce: Delete inactive with 365 days warning"
  ],
  "example": [
    "Check: Active"
  ],
  "default": "Skip"
}

AWS > Shield > Protection > Active > Age

The age after which the AWS Shield protection is no longer considered active. If a create time is unavailable, the time Turbot discovered the resource is used.

The Active control determines whether the resource is in active use, and if not, has the ability to delete / cleanup the resource. When running an automated compliance environment, it's common to end up with a wide range of alarms that are difficult and time consuming to clear. The Active control brings automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the resource (AWS > Shield > Protection > Active > *), raises an alarm, and takes the defined enforcement action. Each Active sub-policy can calculate a status of active, inactive or skipped. Generally, if the resource appears to be Active for any reason it will be considered Active. Note the contrast with Approved, where if the resource appears to be Unapproved for any reason it will be considered Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-shield#/policy/types/protectionActiveAge
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Force inactive if age > 1 day",
  "Force inactive if age > 3 days",
  "Force inactive if age > 7 days",
  "Force inactive if age > 14 days",
  "Force inactive if age > 30 days",
  "Force inactive if age > 60 days",
  "Force inactive if age > 90 days",
  "Force inactive if age > 180 days",
  "Force inactive if age > 365 days"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Force inactive if age > 1 day",
    "Force inactive if age > 3 days",
    "Force inactive if age > 7 days",
    "Force inactive if age > 14 days",
    "Force inactive if age > 30 days",
    "Force inactive if age > 60 days",
    "Force inactive if age > 90 days",
    "Force inactive if age > 180 days",
    "Force inactive if age > 365 days"
  ],
  "example": [
    "Force inactive if age > 90 days"
  ],
  "default": "Skip"
}

AWS > Shield > Protection > Active > Budget

The impact of the budget state on the active control. This policy allows you to force protections to inactive based on the current budget state, as reflected in AWS > Account > Budget > State

The Active control determines whether the resource is in active use, and if not, has the ability to delete / cleanup the resource. When running an automated compliance environment, it's common to end up with a wide range of alarms that are difficult and time consuming to clear. The Active control brings automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the resource (AWS > Shield > Protection > Active > *), raises an alarm, and takes the defined enforcement action. Each Active sub-policy can calculate a status of active, inactive or skipped. Generally, if the resource appears to be Active for any reason it will be considered Active. Note the contrast with Approved, where if the resource appears to be Unapproved for any reason it will be considered Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-shield#/policy/types/protectionActiveBudget
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Force inactive if Budget > State is Over or higher",
  "Force inactive if Budget > State is Critical or higher",
  "Force inactive if Budget > State is Shutdown"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Force inactive if Budget > State is Over or higher",
    "Force inactive if Budget > State is Critical or higher",
    "Force inactive if Budget > State is Shutdown"
  ],
  "example": [
    "Skip"
  ],
  "default": "Skip"
}

AWS > Shield > Protection > Active > Last Modified

The number of days since the AWS Shield protection was last modified before it is considered inactive.

The Active control determines whether the resource is in active use, and if not, has the ability to delete / cleanup the resource. When running an automated compliance environment, it's common to end up with a wide range of alarms that are difficult and time consuming to clear. The Active control brings automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the resource (AWS > Shield > Protection > Active > *), raises an alarm, and takes the defined enforcement action. Each Active sub-policy can calculate a status of active, inactive or skipped. Generally, if the resource appears to be Active for any reason it will be considered Active. Note the contrast with Approved, where if the resource appears to be Unapproved for any reason it will be considered Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-shield#/policy/types/protectionActiveLastModified
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Active if last modified <= 1 day",
  "Active if last modified <= 3 days",
  "Active if last modified <= 7 days",
  "Active if last modified <= 14 days",
  "Active if last modified <= 30 days",
  "Active if last modified <= 60 days",
  "Active if last modified <= 90 days",
  "Active if last modified <= 180 days",
  "Active if last modified <= 365 days",
  "Force active if last modified <= 1 day",
  "Force active if last modified <= 3 days",
  "Force active if last modified <= 7 days",
  "Force active if last modified <= 14 days",
  "Force active if last modified <= 30 days",
  "Force active if last modified <= 60 days",
  "Force active if last modified <= 90 days",
  "Force active if last modified <= 180 days",
  "Force active if last modified <= 365 days"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Active if last modified <= 1 day",
    "Active if last modified <= 3 days",
    "Active if last modified <= 7 days",
    "Active if last modified <= 14 days",
    "Active if last modified <= 30 days",
    "Active if last modified <= 60 days",
    "Active if last modified <= 90 days",
    "Active if last modified <= 180 days",
    "Active if last modified <= 365 days",
    "Force active if last modified <= 1 day",
    "Force active if last modified <= 3 days",
    "Force active if last modified <= 7 days",
    "Force active if last modified <= 14 days",
    "Force active if last modified <= 30 days",
    "Force active if last modified <= 60 days",
    "Force active if last modified <= 90 days",
    "Force active if last modified <= 180 days",
    "Force active if last modified <= 365 days"
  ],
  "example": [
    "Active if last modified <= 90 days"
  ],
  "default": "Skip"
}

AWS > Shield > Protection > Approved

Determine the action to take when an AWS Shield protection is not approved based on AWS > Shield > Protection > Approved > * policies.

The Approved control checks the status of the defined Approved sub-policies for the resource. If the resource is not approved according to any of these policies, this control raises an alarm and takes the defined enforcement action.

For any enforcement actions that specify if new, e.g., Enforce: Delete unapproved if new, this control will only take the enforcement actions for resources created within the last 60 minutes.

See Approved for more information.

URI
tmod:@turbot/aws-shield#/policy/types/protectionApproved
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Check: Approved",
  "Enforce: Delete unapproved if new"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Approved",
    "Enforce: Delete unapproved if new"
  ],
  "example": [
    "Check: Approved"
  ],
  "default": "Skip"
}

AWS > Shield > Protection > Approved > Budget

The policy allows you to set protections to unapproved based on the current budget state, as reflected in AWS > Account > Budget > State

This policy will be evaluated by the Approved control. If an AWS Shield protection is not matched by the approved list, it will be subject to the action specified in the AWS > Shield > Protection > Approved policy.

See Approved for more information.

URI
tmod:@turbot/aws-shield#/policy/types/protectionApprovedBudget
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Unapproved if Budget > State is Over or higher",
  "Unapproved if Budget > State is Critical or higher",
  "Unapproved if Budget > State is Shutdown"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Unapproved if Budget > State is Over or higher",
    "Unapproved if Budget > State is Critical or higher",
    "Unapproved if Budget > State is Shutdown"
  ],
  "example": [
    "Unapproved if Budget > State is Shutdown"
  ],
  "default": "Skip"
}

AWS > Shield > Protection > Approved > Usage

Determine whether the AWS Shield protection is allowed to exist.

This policy will be evaluated by the Approved control. If an AWS Shield protection is not approved, it will be subject to the action specified in the AWS > Shield > Protection > Approved policy.

See Approved for more information.

URI
tmod:@turbot/aws-shield#/policy/types/protectionApprovedUsage
Category
Parent
Targets
Valid Value
[
  "Not approved",
  "Approved",
  "Approved if AWS > Shield > Enabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Not approved",
    "Approved",
    "Approved if AWS > Shield > Enabled"
  ],
  "example": [
    "Not approved"
  ],
  "default": "Approved if AWS > Shield > Enabled"
}

AWS > Shield > Protection > CMDB

Configure whether to record and synchronize details for the AWS Shield protection into the CMDB.

The CMDB control is responsible for populating and updating all the attributes for that resource type in the Turbot CMDB. All policies and controls in Turbot are based around the resource, so usually the CMDB policy is set to "Enforce: Enabled".

If set to Skip then all changes to the CMDB are paused - no new resources will be discovered, no updates will be made and deleted resources will not be removed.

To cleanup resources and stop tracking changes, set this policy to "Enforce: Disabled".

URI
tmod:@turbot/aws-shield#/policy/types/protectionCmdb
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Enforce: Enabled",
  "Enforce: Disabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Enforce: Enabled",
    "Enforce: Disabled"
  ],
  "example": [
    "Skip"
  ],
  "default": "Enforce: Enabled"
}

AWS > Shield > Protection > Usage

Configure the number of AWS Shield protections that can be used for this account and the current consumption against the limit.

You can configure the behavior of the control with this AWS > Shield > Protection > Usage policy.

URI
tmod:@turbot/aws-shield#/policy/types/protectionUsage
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Check: Usage <= 85% of Limit",
  "Check: Usage <= 100% of Limit"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Usage <= 85% of Limit",
    "Check: Usage <= 100% of Limit"
  ],
  "example": [
    "Check: Usage <= 85% of Limit"
  ],
  "default": "Skip"
}

AWS > Shield > Protection > Usage > Limit

Maximum number of items that can be created for this account.

URI
tmod:@turbot/aws-shield#/policy/types/protectionUsageLimit
Category
Parent
Targets
Schema
{
  "type": "integer",
  "minimum": 0,
  "default": 1000
}

AWS > Shield > Tags Template [Default]

A template used to generate the keys and values for AWS Shield resources.

By default, all Shield resource Tags > Template policies will use this value.

URI
tmod:@turbot/aws-shield#/policy/types/shieldTagsTemplate
Category
Parent
Targets
Default Template Input
"{\n  defaultTags: policyValue(uri:\"tmod:@turbot/aws#/policy/types/defaultTagsTemplate\") {\n    value\n  }\n}\n"
Default Template
"{%- if $.defaultTags.value | length == 0 %} [] {%- elif $.defaultTags.value != undefined %}{{ $.defaultTags.value | dump | safe }}{%- else %}{% for item in $.defaultTags.value %}- {{ item }}{% endfor %}{% endif %}"
Schema

AWS > Turbot > Event Handlers > Events > Rules > Event Sources > @turbot/aws-shield

AWS Shield CloudWatch Events event sources for the Turbot Event Handlers.

URI
tmod:@turbot/aws-shield#/policy/types/shieldEventSources
Category
Parent
Targets
Schema
{
  "type": "array",
  "items": {
    "type": "string"
  },
  "default": [
    "aws.shield"
  ]
}

AWS > Turbot > Permissions > Compiled > API Boundary > @turbot/aws-shield

A read-only policy generated by Turbot that lists the APIs that should be added to the turbot-managed (hard) boundary policy, thereby enabling them to be assigned to users and roles. This value will change depending on the value of the value of the AWS > Shield > Permissions > Lockdown > API Boundary policy

URI
tmod:@turbot/aws-shield#/policy/types/awsCompiledApiBoundary
Category
Parent
Targets
Schema
{
  "type": "array"
}

AWS > Turbot > Permissions > Compiled > Levels > @turbot/aws-shield

A calculated policy that Turbot uses to create a compiled list of ALL permissions for AWS Shield that is used as input to the stack that manages the Turbot IAM permissions objects.

URI
tmod:@turbot/aws-shield#/policy/types/awsLevelsCompiled
Category
Parent
Targets
Schema

AWS > Turbot > Permissions > Compiled > Service Permissions > @turbot/aws-shield

A calculated policy that Turbot uses to create a compiled list of ALL permissions for AWS Shield that is used as input to the control that manages the IAM stack.

URI
tmod:@turbot/aws-shield#/policy/types/awsCompiledServicePermissions
Category
Parent
Targets
Schema