Policy types for @turbot/aws-route53resolver

Parent

Targets

Valid Value

[
  "Enabled",
  "Disabled",
  "Enabled if AWS > Route 53 Resolver > Enabled"
]

Schema

{
  "type": "string",
  "enum": [
    "Enabled",
    "Disabled",
    "Enabled if AWS > Route 53 Resolver > Enabled"
  ],
  "default": "Enabled"
}

AWS > Route 53 Resolver > Approved Regions [Default]

A list of AWS regions in which AWS Route 53 Resolver resources are approved for use.

The expected format is an array of regions names. You may use the '*' and
'?' wildcard characters.

This policy is the default value for all AWS Route 53 Resolver resources' Approved > Regions policies.

URI

tmod:@turbot/aws-route53resolver#/policy/types/route53ResolverApprovedRegionsDefault

Category

Parent

Targets

aws#/definitions/regionNameMatcherList

Default Template Input

"{\n  regions: policyValue(uri:\"tmod:@turbot/aws#/policy/types/approvedRegionsDefault\") {\n    value\n  }\n}\n"

Default Template

"{% if $.regions.value | length == 0 %} [] {% endif %}{% for item in $.regions.value %}- &#39;{{ item }}&#39;&#92;n{% endfor %}"

Schema

AWS > Route 53 Resolver > Enabled

Configure whether the AWS Route 53 Resolver service is enabled.
This will only affect Guardrails managed User Roles and will allow the Guardrails managed user to access AWS Route 53 Resolver service.
- Enabled policy allows Guardrails managed users to perform all the actions for the service
- Enabled: Metadata Only policy allows Guardrails managed users to perform only the metadata level actions for the service (like describe*, list*)

Note:
- Disabled policy disables the service but does NOT disable the API for Guardrails or SuperUsers
- All the resource data stored in the Guardrails CMDB is considered to be metadata
- For more information related to permissions and grant levels, please check the documentation

URI

tmod:@turbot/aws-route53resolver#/policy/types/route53ResolverEnabled

Category

Parent

Targets

Valid Value

[
  "Enabled",
  "Enabled: Metadata Only",
  "Disabled"
]

Schema

{
  "type": "string",
  "enum": [
    "Enabled",
    "Enabled: Metadata Only",
    "Disabled"
  ],
  "example": [
    "Enabled"
  ],
  "default": "Disabled"
}

AWS > Route 53 Resolver > Permissions

Configure whether permissions policies are in effect for AWS Route 53 Resolver.

This setting does not affect account level permissions (AWS/Admin, AWS/Owner, etc)

Note: The behavior of this policy depends on the value of AWS > Permissions.

URI

tmod:@turbot/aws-route53resolver#/policy/types/route53ResolverPermissions

Category

Parent

Targets

Valid Value

[
  "Enabled",
  "Disabled",
  "Enabled if AWS > Route 53 Resolver > Enabled & AWS > Route 53 Resolver > API Enabled"
]

Schema

{
  "type": "string",
  "enum": [
    "Enabled",
    "Disabled",
    "Enabled if AWS > Route 53 Resolver > Enabled & AWS > Route 53 Resolver > API Enabled"
  ],
  "example": [
    "Enabled"
  ],
  "default": "Enabled if AWS > Route 53 Resolver > Enabled & AWS > Route 53 Resolver > API Enabled"
}

AWS > Route 53 Resolver > Permissions > Levels

Define the permissions levels that can be used to grant access to an AWS account.
Permissions levels defined will appear in the UI to assign access to Guardrails users.
This policy provides a default for Permissions > Levels in each service,
however you can explicitly override the setting for each service if desired

URI

tmod:@turbot/aws-route53resolver#/policy/types/route53ResolverPermissionsLevels

Category

AWS > Route 53 Resolver > Permissions

Parent

Targets

Default Template Input

[
  "{\n  item: account {\n    turbot{\n      id\n    }\n  }\n}\n",
  "{\n  availableLevels: policyValues(filter:\"policyTypeLevel:self resourceId:{{ $.item.turbot.id }} policyType:'tmod:@turbot/aws-iam#/policy/types/permissionsLevelsDefault'\") {\n    items {\n      value\n    }\n  }\n}\n"
]

Default Template

"{% if $.availableLevels.items[0].value | length == 0 %} [] {% endif %}{% for item in $.availableLevels.items[0].value %}- {{ item }}&#92;n{% endfor %}"

Schema

{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "Metadata",
      "ReadOnly",
      "Operator",
      "Admin",
      "Owner"
    ]
  }
}

AWS > Route 53 Resolver > Permissions > Levels > Modifiers

A map of AWS API to Guardrails Permission Level used to customize Guardrails' standard permissions.
You can add, remove or redefine the mapping of AWS API operations to Guardrails permissions levels here.

Note: Modifiers are cumulative - if you add a permission to the Metadata level, it is also added to ReadOnly, Operator and Admin.
Modifier policies set here apply ONLY to the AWS level

 example: - "glacier:createvault": admin - "glacier:ListVaults": metadata - "s3:DeleteBucket": none 

URI

tmod:@turbot/aws-route53resolver#/policy/types/route53ResolverPermissionsLevelsModifiers

Category

AWS > Route 53 Resolver > Permissions > Levels

Parent

Targets

aws-iam#/definitions/awsModifierList

Schema

AWS > Route 53 Resolver > Permissions > Lockdown

URI

tmod:@turbot/aws-route53resolver#/policy/types/route53ResolverPermissionsLockdown

Category

AWS > Route 53 Resolver > Permissions

Parent

Targets

AWS > Route 53 Resolver > Permissions > Lockdown > API Boundary

Configure whether the AWS route53Resolver API is enabled for all users and roles in guardrails-managed boundary policies.

Note: Disabling the service disables the API for ALL users and roles, and Guardrails will have no access to the API.

URI

tmod:@turbot/aws-route53resolver#/policy/types/route53ResolverPermissionsLockdownApiBoundary

Category

AWS > Route 53 Resolver > Permissions > Lockdown

Parent

Targets

Valid Value

[
  "Enabled if AWS > Route 53 Resolver > API Enabled"
]

Schema

{
  "type": "string",
  "enum": [
    "Enabled if AWS > Route 53 Resolver > API Enabled"
  ],
  "example": [
    "Enabled if AWS > Route 53 Resolver > API Enabled"
  ],
  "default": "Enabled if AWS > Route 53 Resolver > API Enabled"
}

AWS > Route 53 Resolver > Regions

A list of AWS regions in which AWS Route 53 Resolver resources are supported for use.

The expected format is an array of regions names. You may use the '*' and
'?' wildcard characters.

This policy is the default value for all AWS Route 53 Resolver resources' Regions policies.

URI

tmod:@turbot/aws-route53resolver#/policy/types/route53ResolverRegionsDefault

Category

Cloud > Location

Parent

Targets

Schema

{
  "allOf": [
    {
      "$ref": "aws#/definitions/regionNameMatcherList"
    },
    {
      "default": [
        "ap-east-1",
        "ap-northeast-1",
        "ap-northeast-2",
        "ap-south-1",
        "ap-southeast-1",
        "ap-southeast-2",
        "ca-central-1",
        "eu-central-1",
        "eu-north-1",
        "eu-west-1",
        "eu-west-2",
        "eu-west-3",
        "me-south-1",
        "sa-east-1",
        "us-east-1",
        "us-east-2",
        "us-gov-east-1",
        "us-gov-west-1",
        "us-west-1",
        "us-west-2"
      ]
    }
  ]
}

AWS > Route 53 Resolver > Resolver Endpoint > Active

Determine the action to take when an AWS Route 53 Resolver resolver endpoint, based on the AWS > Route 53 Resolver > Resolver Endpoint > Active > * policies.

The control determines whether the resource is in active use, and if not,
has the ability to delete / cleanup the resource. When running an automated
compliance environment, it's common to end up with a wide range of alarms
that are difficult and time consuming to clear. The Active control brings
automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the
resource (AWS > Route 53 Resolver > Resolver Endpoint > Active > *), raises an alarm, and takes the defined enforcement
action. Each Active sub-policy can calculate a status of active, inactive
or skipped. Generally, if the resource appears to be Active for any reason
it will be considered Active.
Note the contrast with Approved, where if the resource appears to be Unapproved for any reason it will be considered
Unapproved.

See Active for more information.

URI

tmod:@turbot/aws-route53resolver#/policy/types/resolverEndpointActive

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Check: Active",
  "Enforce: Delete inactive with 1 day warning",
  "Enforce: Delete inactive with 3 days warning",
  "Enforce: Delete inactive with 7 days warning",
  "Enforce: Delete inactive with 14 days warning",
  "Enforce: Delete inactive with 30 days warning",
  "Enforce: Delete inactive with 60 days warning",
  "Enforce: Delete inactive with 90 days warning",
  "Enforce: Delete inactive with 180 days warning",
  "Enforce: Delete inactive with 365 days warning"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Active",
    "Enforce: Delete inactive with 1 day warning",
    "Enforce: Delete inactive with 3 days warning",
    "Enforce: Delete inactive with 7 days warning",
    "Enforce: Delete inactive with 14 days warning",
    "Enforce: Delete inactive with 30 days warning",
    "Enforce: Delete inactive with 60 days warning",
    "Enforce: Delete inactive with 90 days warning",
    "Enforce: Delete inactive with 180 days warning",
    "Enforce: Delete inactive with 365 days warning"
  ],
  "example": [
    "Check: Active"
  ],
  "default": "Skip"
}

AWS > Route 53 Resolver > Resolver Endpoint > Active > Age

The age after which the AWS Route 53 Resolver resolver endpoint
is no longer considered active. If a create time is unavailable, the time Guardrails discovered the resource is used.

The Active
control determines whether the resource is in active use, and if not, has
the ability to delete / cleanup the resource. When running an automated
compliance environment, it's common to end up with a wide range of alarms
that are difficult and time consuming to clear. The Active control brings
automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the
resource (AWS > Route 53 Resolver > Resolver Endpoint > Active > *),
raises an alarm, and takes the defined enforcement action. Each Active
sub-policy can calculate a status of active, inactive or skipped. Generally,
if the resource appears to be Active for any reason it will be considered Active.
Note the contrast with Approved, where if the resource appears to be Unapproved
for any reason it will be considered Unapproved.

See Active for more information.

URI

tmod:@turbot/aws-route53resolver#/policy/types/resolverEndpointActiveAge

Category

AWS > Route 53 Resolver > Resolver Endpoint > Active

Parent

Targets

Valid Value

[
  "Skip",
  "Force inactive if age > 1 day",
  "Force inactive if age > 3 days",
  "Force inactive if age > 7 days",
  "Force inactive if age > 14 days",
  "Force inactive if age > 30 days",
  "Force inactive if age > 60 days",
  "Force inactive if age > 90 days",
  "Force inactive if age > 180 days",
  "Force inactive if age > 365 days"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Force inactive if age > 1 day",
    "Force inactive if age > 3 days",
    "Force inactive if age > 7 days",
    "Force inactive if age > 14 days",
    "Force inactive if age > 30 days",
    "Force inactive if age > 60 days",
    "Force inactive if age > 90 days",
    "Force inactive if age > 180 days",
    "Force inactive if age > 365 days"
  ],
  "example": [
    "Force inactive if age > 90 days"
  ],
  "default": "Skip"
}

AWS > Route 53 Resolver > Resolver Endpoint > Active > Last Modified

The number of days since the AWS Route 53 Resolver resolver endpoint
was last modified before it is considered inactive.

The Active
control determines whether the resource is in active use, and if not, has
the ability to delete / cleanup the resource. When running an automated
compliance environment, it's common to end up with a wide range of alarms
that are difficult and time consuming to clear. The Active control brings
automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the
resource (AWS > Route 53 Resolver > Resolver Endpoint > Active > *),
raises an alarm, and takes the defined enforcement action. Each Active
sub-policy can calculate a status of active, inactive or skipped. Generally,
if the resource appears to be Active for any reason it will be considered Active.
Note the contrast with Approved, where if the resource appears to be Unapproved
for any reason it will be considered Unapproved.

See Active for more information.

URI

tmod:@turbot/aws-route53resolver#/policy/types/resolverEndpointActiveLastModified

Category

AWS > Route 53 Resolver > Resolver Endpoint > Active

Parent

Targets

Valid Value

[
  "Skip",
  "Active if last modified <= 1 day",
  "Active if last modified <= 3 days",
  "Active if last modified <= 7 days",
  "Active if last modified <= 14 days",
  "Active if last modified <= 30 days",
  "Active if last modified <= 60 days",
  "Active if last modified <= 90 days",
  "Active if last modified <= 180 days",
  "Active if last modified <= 365 days",
  "Force active if last modified <= 1 day",
  "Force active if last modified <= 3 days",
  "Force active if last modified <= 7 days",
  "Force active if last modified <= 14 days",
  "Force active if last modified <= 30 days",
  "Force active if last modified <= 60 days",
  "Force active if last modified <= 90 days",
  "Force active if last modified <= 180 days",
  "Force active if last modified <= 365 days"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Active if last modified <= 1 day",
    "Active if last modified <= 3 days",
    "Active if last modified <= 7 days",
    "Active if last modified <= 14 days",
    "Active if last modified <= 30 days",
    "Active if last modified <= 60 days",
    "Active if last modified <= 90 days",
    "Active if last modified <= 180 days",
    "Active if last modified <= 365 days",
    "Force active if last modified <= 1 day",
    "Force active if last modified <= 3 days",
    "Force active if last modified <= 7 days",
    "Force active if last modified <= 14 days",
    "Force active if last modified <= 30 days",
    "Force active if last modified <= 60 days",
    "Force active if last modified <= 90 days",
    "Force active if last modified <= 180 days",
    "Force active if last modified <= 365 days"
  ],
  "example": [
    "Active if last modified <= 90 days"
  ],
  "default": "Skip"
}

AWS > Route 53 Resolver > Resolver Endpoint > Approved

Determine the action to take when an AWS Route 53 Resolver resolver endpoint is not approved based on AWS > Route 53 Resolver > Resolver Endpoint > Approved > * policies.

The Approved control checks the status of the defined Approved sub-policies for the resource. If the resource is not approved according to any of these policies, this control raises an alarm and takes the defined enforcement action.

For any enforcement actions that specify if new, e.g., Enforce: Delete unapproved if new, this control will only take the enforcement actions for resources created within the last 60 minutes.

See Approved for more information.

URI

tmod:@turbot/aws-route53resolver#/policy/types/resolverEndpointApproved

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Check: Approved",
  "Enforce: Delete unapproved if new"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Approved",
    "Enforce: Delete unapproved if new"
  ],
  "example": [
    "Check: Approved"
  ],
  "default": "Skip"
}

AWS > Route 53 Resolver > Resolver Endpoint > Approved > Custom

Determine whether the AWS Route 53 Resolver resolver endpoint is allowed to exist.
This policy will be evaluated by the Approved control. If an AWS Route 53 Resolver resolver endpoint is not approved, it will be subject to the action specified in the AWS > Route 53 Resolver > Resolver Endpoint > Approved policy.
See Approved for more information.

Note: The policy value must be a string with a value of Approved, Not approved or Skip, or in the form of YAML objects. The object(s) must contain the key result with its value as Approved or Not approved. A custom title and message can also be added using the keys title and message respectively.

URI

tmod:@turbot/aws-route53resolver#/policy/types/resolverEndpointApprovedCustom

Category

AWS > Route 53 Resolver > Resolver Endpoint > Approved

Parent

Targets

Schema

{
  "example": [
    "Approved",
    "Not approved",
    "Skip",
    {
      "result": "Approved"
    },
    {
      "title": "string",
      "result": "Not approved"
    },
    {
      "title": "string",
      "result": "Approved",
      "message": "string"
    },
    [
      {
        "title": "string",
        "result": "Approved",
        "message": "string"
      },
      {
        "title": "string",
        "result": "Not approved",
        "message": "string"
      }
    ]
  ],
  "anyOf": [
    {
      "type": "array",
      "items": {
        "type": "object",
        "properties": {
          "title": {
            "type": "string",
            "pattern": "^[\\W\\w]{1,32}$"
          },
          "message": {
            "type": "string",
            "pattern": "^[\\W\\w]{1,128}$"
          },
          "result": {
            "type": "string",
            "pattern": "^(Approved|Not approved|Skip)$"
          }
        },
        "required": [
          "result"
        ],
        "additionalProperties": false
      }
    },
    {
      "type": "object",
      "properties": {
        "title": {
          "type": "string",
          "pattern": "^[\\W\\w]{1,32}$"
        },
        "message": {
          "type": "string",
          "pattern": "^[\\W\\w]{1,128}$"
        },
        "result": {
          "type": "string",
          "pattern": "^(Approved|Not approved|Skip)$"
        }
      },
      "required": [
        "result"
      ],
      "additionalProperties": false
    },
    {
      "type": "string",
      "pattern": "^(Approved|Not approved|Skip)$"
    }
  ],
  "default": "Skip"
}

AWS > Route 53 Resolver > Resolver Endpoint > Approved > Regions

A list of AWS regions in which AWS Route 53 Resolver resolver endpoints are approved for use.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

This policy will be evaluated by the Approved control. If an AWS Route 53 Resolver resolver endpoint is created in a region that is not in the approved list, it will be subject to the action specified in the AWS > Route 53 Resolver > Resolver Endpoint > Approved policy.

See Approved for more information.

URI

tmod:@turbot/aws-route53resolver#/policy/types/resolverEndpointApprovedRegions

Category

AWS > Route 53 Resolver > Resolver Endpoint > Approved

Parent

Targets

aws#/definitions/regionNameMatcherList

Default Template Input

"{\n  regions: policy(uri: \"tmod:@turbot/aws-route53resolver#/policy/types/route53ResolverApprovedRegionsDefault\")\n}\n"

Default Template

"{% if $.regions | length == 0 %} [] {% endif %}{% for item in $.regions %}- &#39;{{ item }}&#39;&#92;n{% endfor %}"

Schema

AWS > Route 53 Resolver > Resolver Endpoint > Approved > Usage

URI

tmod:@turbot/aws-route53resolver#/policy/types/resolverEndpointApprovedUsage

Category

AWS > Route 53 Resolver > Resolver Endpoint > Approved

Parent

Targets

Valid Value

[
  "Not approved",
  "Approved",
  "Approved if AWS > Route 53 Resolver > Enabled"
]

Schema

{
  "type": "string",
  "enum": [
    "Not approved",
    "Approved",
    "Approved if AWS > Route 53 Resolver > Enabled"
  ],
  "example": [
    "Not approved"
  ],
  "default": "Approved if AWS > Route 53 Resolver > Enabled"
}

AWS > Route 53 Resolver > Resolver Endpoint > CMDB

Configure whether to record and synchronize details for the AWS Route 53 Resolver resolver endpoint into the CMDB.

The CMDB control is responsible for populating and updating all the attributes for that resource type in the Guardrails CMDB.
All policies and controls in Guardrails are based around the resource, so usually the CMDB policy is set to "Enforce: Enabled".

If set to Skip then all changes to the CMDB are paused - no new resources will be discovered, no updates will be made and deleted resources will not be removed.

To cleanup resources and stop tracking changes, set this policy to "Enforce: Disabled".

CMDB controls also use the Regions policy associated with the resource. If region is not in AWS > Route 53 Resolver > Resolver Endpoint > Regions policy, the CMDB control will delete the resource from the CMDB.

(Note: Setting CMDB to "Skip" will also pause these changes.)

URI

tmod:@turbot/aws-route53resolver#/policy/types/resolverEndpointCmdb

Category

CMDB

Parent

Targets

AWS > Region

Valid Value

[
  "Skip",
  "Enforce: Enabled",
  "Enforce: Disabled"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Enforce: Enabled",
    "Enforce: Disabled"
  ],
  "example": [
    "Skip"
  ],
  "default": "Enforce: Enabled"
}

AWS > Route 53 Resolver > Resolver Endpoint > Configured

Determine how to configure this resource.

Note: If the resource is managed by another stack, then the Skip/Check/Enforce values here are ignored
and inherit from the stack that owns it.

URI

tmod:@turbot/aws-route53resolver#/policy/types/resolverEndpointConfigured

Category

Resource > Configured

Parent

Targets

AWS > Route 53 Resolver > Resolver Endpoint > Configured

Valid Value

[
  "Skip (unless claimed by a stack)",
  "Check: Per Configured > Source (unless claimed by a stack)",
  "Enforce: Per Configured > Source (unless claimed by a stack)"
]

Schema

{
  "enum": [
    "Skip (unless claimed by a stack)",
    "Check: Per Configured > Source (unless claimed by a stack)",
    "Enforce: Per Configured > Source (unless claimed by a stack)"
  ],
  "default": "Skip (unless claimed by a stack)"
}

AWS > Route 53 Resolver > Resolver Endpoint > Configured > Claim Precedence

An ordered list of who is allowed to claim a resource.
A stack cannot claim a resource if it is already claimed by another
stack at a higher level of precedence.

URI

tmod:@turbot/aws-route53resolver#/policy/types/resolverEndpointConfiguredPrecedence

Category

Resource > Configured

Parent

Targets

AWS > Route 53 Resolver > Resolver Endpoint > Configured

Default Template Input

"{\n  defaultPrecedence: policy(uri:\"tmod:@turbot/turbot#/policy/types/claimPrecedenceDefault\")\n}\n"

Default Template

"{%- if $.defaultPrecedence | length == 0 %}[]{%- else %}{% for item in $.defaultPrecedence %}- &#39;{{ item }}&#39;{% endfor %}{% endif %}"

Schema

{
  "type": "array",
  "items": {
    "type": "string"
  }
}

AWS > Route 53 Resolver > Resolver Endpoint > Configured > Source

A HCL or JSON format Terraform configuration source used to configure this resource.

URI

tmod:@turbot/aws-route53resolver#/policy/types/resolverEndpointConfiguredSource

Category

Resource > Configured

Parent

Targets

Schema

{
  "type": "string",
  "default": "",
  "x-schema-form": {
    "type": "code",
    "language": "hcl"
  }
}

AWS > Route 53 Resolver > Resolver Endpoint > Regions

A list of AWS regions in which AWS Route53 Resolver resolver endpoints are supported for use.

Any resolver endpoints in a region not listed here will not be recorded in CMDB.

The expected format is an array of regions names. You may use the '*' and
'?' wildcard characters.

URI

tmod:@turbot/aws-route53resolver#/policy/types/resolverEndpointRegions

Category

Cloud > Location

Parent

Targets

aws#/definitions/regionNameMatcherList

Default Template Input

"{\n  regions: policyValue(uri:\"tmod:@turbot/aws-route53resolver#/policy/types/route53ResolverRegionsDefault\") {\n    value\n  }\n}\n"

Default Template

"{% if $.regions.value | length == 0 %} [] {% endif %}{% for item in $.regions.value %}- &#39;{{ item }}&#39;&#92;n{% endfor %}"

Schema

AWS > Route 53 Resolver > Resolver Endpoint > Tags

Determine the action to take when an AWS Route 53 Resolver resolver endpoint tags are not updated based on the AWS > Route 53 Resolver > Resolver Endpoint > Tags > * policies.

The control ensure AWS Route 53 Resolver resolver endpoint tags include tags defined in AWS > Route 53 Resolver > Resolver Endpoint > Tags > Template.

Tags not defined in Resolver Endpoint Tags Template will not be modified or deleted. Setting a tag value to undefined will result in the tag being deleted.

See Tags for more information.

URI

tmod:@turbot/aws-route53resolver#/policy/types/resolverEndpointTags

Category

Resource > Tags

Parent

Targets

AWS > Route 53 Resolver > Resolver Endpoint > Tags

Valid Value

[
  "Skip",
  "Check: Tags are correct",
  "Enforce: Set tags"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Tags are correct",
    "Enforce: Set tags"
  ],
  "example": [
    "Check: Tags are correct"
  ],
  "default": "Skip"
}

AWS > Route 53 Resolver > Resolver Endpoint > Tags > Template

The template is used to generate the keys and values for AWS Route 53 Resolver resolver endpoint.

Tags not defined in Resolver Endpoint Tags Template will not be modified or deleted. Setting a tag value to undefined will result in the tag being deleted.

See Tags for more information.

URI

tmod:@turbot/aws-route53resolver#/policy/types/resolverEndpointTagsTemplate

Category

Resource > Tags

Parent

Targets

aws#/definitions/tagsTemplateInput

Default Template Input

[
  "{\n  account {\n    turbot {\n      id\n    }\n  }\n}\n",
  "{\n  defaultTags: policyValue(uri:\"tmod:@turbot/aws-route53resolver#/policy/types/route53ResolverTagsTemplate\" resourceId: \"{{ $.account.turbot.id }}\") {\n    value\n  }\n}\n"
]

Default Template

"{%- if $.defaultTags.value | length == 0 %} [] {%- elif $.defaultTags.value != undefined %}{{ $.defaultTags.value | dump | safe }}{%- else %}{% for item in $.defaultTags.value %}- {{ item }}{% endfor %}{% endif %}"

Schema

AWS > Route 53 Resolver > Resolver Endpoint > Usage

Configure the number of AWS Route 53 Resolver resolver endpoints that can be used for this account and the current consumption against the limit.

You can configure the behavior of the control with this AWS > Route 53 Resolver > Resolver Endpoint > Usage policy.

URI

tmod:@turbot/aws-route53resolver#/policy/types/resolverEndpointUsage

Category

Resource > Usage

Parent

Targets

AWS > Route 53 Resolver > Resolver Endpoint > Usage

Valid Value

[
  "Skip",
  "Check: Usage <= 85% of Limit",
  "Check: Usage <= 100% of Limit"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Usage <= 85% of Limit",
    "Check: Usage <= 100% of Limit"
  ],
  "example": [
    "Check: Usage <= 85% of Limit"
  ],
  "default": "Skip"
}

AWS > Route 53 Resolver > Resolver Endpoint > Usage > Limit

Maximum number of items that can be created for this account.

URI

tmod:@turbot/aws-route53resolver#/policy/types/resolverEndpointUsageLimit

Category

Resource > Usage

Parent

Targets

Schema

{
  "type": "integer",
  "minimum": 0,
  "default": 4
}

AWS > Route 53 Resolver > Resolver Rule > Active

Determine the action to take when an AWS Route 53 Resolver resolver rule, based on the AWS > Route 53 Resolver > Resolver Rule > Active > * policies.

The control determines whether the resource is in active use, and if not,
has the ability to delete / cleanup the resource. When running an automated
compliance environment, it's common to end up with a wide range of alarms
that are difficult and time consuming to clear. The Active control brings
automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the
resource (AWS > Route 53 Resolver > Resolver Rule > Active > *), raises an alarm, and takes the defined enforcement
action. Each Active sub-policy can calculate a status of active, inactive
or skipped. Generally, if the resource appears to be Active for any reason
it will be considered Active.
Note the contrast with Approved, where if the resource appears to be Unapproved for any reason it will be considered
Unapproved.

See Active for more information.

URI

tmod:@turbot/aws-route53resolver#/policy/types/resolverRuleActive

Category