Policy types for @turbot/aws-logs

Parent

Targets

Valid Value

[
  "Enabled",
  "Disabled",
  "Enabled if AWS > Logs > Enabled"
]

Schema

{
  "type": "string",
  "enum": [
    "Enabled",
    "Disabled",
    "Enabled if AWS > Logs > Enabled"
  ],
  "default": "Enabled"
}

AWS > Logs > Approved Regions [Default]

A list of AWS regions in which AWS Logs resources are approved for use.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

This policy is the default value for all AWS Logs resources' Approved > Regions policies.

URI

tmod:@turbot/aws-logs#/policy/types/logsApprovedRegionsDefault

Category

Parent

Targets

Default Template Input

"{\n  regions: policyValue(uri:\"tmod:@turbot/aws#/policy/types/approvedRegionsDefault\") {\n    value\n  }\n}\n"

Default Template

"{% if $.regions.value | length == 0 %} [] {% endif %}{% for item in $.regions.value %}- &#39;{{ item }}&#39;\n{% endfor %}"

Schema

AWS > Logs > Enabled

Configure whether the AWS Logs service is enabled. This will only affect Turbot managed User Roles and will allow the Turbot managed user to access AWS Logs service.

Enabled policy allows Turbot managed users to perform all the actions for the service
Enabled: Metadata Only policy allows Turbot managed users to perform only the metadata level actions for the service (like describe*, list*)

Note:

Disabled policy disables the service but does NOT disable the API for Turbot or SuperUsers
All the resource data stored in the Turbot CMDB is considered to be metadata
For more information related to permissions and grant levels, please check the documentation

URI

tmod:@turbot/aws-logs#/policy/types/logsEnabled

Category

Parent

Targets

Valid Value

[
  "Enabled",
  "Enabled: Metadata Only",
  "Disabled"
]

Schema

{
  "type": "string",
  "enum": [
    "Enabled",
    "Enabled: Metadata Only",
    "Disabled"
  ],
  "example": [
    "Enabled"
  ],
  "default": "Disabled"
}

AWS > Logs > Log Group > Active

Determine the action to take when an AWS Logs log group, based on the AWS > Logs > Log Group > Active > * policies.

The control determines whether the resource is in active use, and if not, has the ability to delete / cleanup the resource. When running an automated compliance environment, it's common to end up with a wide range of alarms that are difficult and time consuming to clear. The Active control brings automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the resource (AWS > Logs > Log Group > Active > *), raises an alarm, and takes the defined enforcement action. Each Active sub-policy can calculate a status of active, inactive or skipped. Generally, if the resource appears to be Active for any reason it will be considered Active. Note the contrast with Approved, where if the resource appears to be Unapproved for any reason it will be considered Unapproved.

See Active for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logGroupActive

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Check: Active",
  "Enforce: Delete inactive with 1 day warning",
  "Enforce: Delete inactive with 3 days warning",
  "Enforce: Delete inactive with 7 days warning",
  "Enforce: Delete inactive with 14 days warning",
  "Enforce: Delete inactive with 30 days warning",
  "Enforce: Delete inactive with 60 days warning",
  "Enforce: Delete inactive with 90 days warning",
  "Enforce: Delete inactive with 180 days warning",
  "Enforce: Delete inactive with 365 days warning"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Active",
    "Enforce: Delete inactive with 1 day warning",
    "Enforce: Delete inactive with 3 days warning",
    "Enforce: Delete inactive with 7 days warning",
    "Enforce: Delete inactive with 14 days warning",
    "Enforce: Delete inactive with 30 days warning",
    "Enforce: Delete inactive with 60 days warning",
    "Enforce: Delete inactive with 90 days warning",
    "Enforce: Delete inactive with 180 days warning",
    "Enforce: Delete inactive with 365 days warning"
  ],
  "example": [
    "Check: Active"
  ],
  "default": "Skip"
}

AWS > Logs > Log Group > Active > Age

The age after which the AWS Logs log group is no longer considered active. If a create time is unavailable, the time Turbot discovered the resource is used.

The Active control determines whether the resource is in active use, and if not, has the ability to delete / cleanup the resource. When running an automated compliance environment, it's common to end up with a wide range of alarms that are difficult and time consuming to clear. The Active control brings automated, well-defined control to this process.

See Active for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logGroupActiveAge

Category

AWS > Logs > Log Group > Active

Parent

Targets

Valid Value

[
  "Skip",
  "Force inactive if age > 1 day",
  "Force inactive if age > 3 days",
  "Force inactive if age > 7 days",
  "Force inactive if age > 14 days",
  "Force inactive if age > 30 days",
  "Force inactive if age > 60 days",
  "Force inactive if age > 90 days",
  "Force inactive if age > 180 days",
  "Force inactive if age > 365 days"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Force inactive if age > 1 day",
    "Force inactive if age > 3 days",
    "Force inactive if age > 7 days",
    "Force inactive if age > 14 days",
    "Force inactive if age > 30 days",
    "Force inactive if age > 60 days",
    "Force inactive if age > 90 days",
    "Force inactive if age > 180 days",
    "Force inactive if age > 365 days"
  ],
  "example": [
    "Force inactive if age > 90 days"
  ],
  "default": "Skip"
}

AWS > Logs > Log Group > Active > Budget

The impact of the budget state on the active control. This policy allows you to force logGroups to inactive based on the current budget state, as reflected in AWS > Account > Budget > State

See Active for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logGroupActiveBudget

Category

AWS > Logs > Log Group > Active

Parent

Targets

Valid Value

[
  "Skip",
  "Force inactive if Budget > State is Over or higher",
  "Force inactive if Budget > State is Critical or higher",
  "Force inactive if Budget > State is Shutdown"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Force inactive if Budget > State is Over or higher",
    "Force inactive if Budget > State is Critical or higher",
    "Force inactive if Budget > State is Shutdown"
  ],
  "example": [
    "Skip"
  ],
  "default": "Skip"
}

AWS > Logs > Log Group > Active > Last Modified

The number of days since the AWS Logs log group was last modified before it is considered inactive.

See Active for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logGroupActiveLastModified

Category

AWS > Logs > Log Group > Active

Parent

Targets

Valid Value

[
  "Skip",
  "Active if last modified <= 1 day",
  "Active if last modified <= 3 days",
  "Active if last modified <= 7 days",
  "Active if last modified <= 14 days",
  "Active if last modified <= 30 days",
  "Active if last modified <= 60 days",
  "Active if last modified <= 90 days",
  "Active if last modified <= 180 days",
  "Active if last modified <= 365 days",
  "Force active if last modified <= 1 day",
  "Force active if last modified <= 3 days",
  "Force active if last modified <= 7 days",
  "Force active if last modified <= 14 days",
  "Force active if last modified <= 30 days",
  "Force active if last modified <= 60 days",
  "Force active if last modified <= 90 days",
  "Force active if last modified <= 180 days",
  "Force active if last modified <= 365 days"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Active if last modified <= 1 day",
    "Active if last modified <= 3 days",
    "Active if last modified <= 7 days",
    "Active if last modified <= 14 days",
    "Active if last modified <= 30 days",
    "Active if last modified <= 60 days",
    "Active if last modified <= 90 days",
    "Active if last modified <= 180 days",
    "Active if last modified <= 365 days",
    "Force active if last modified <= 1 day",
    "Force active if last modified <= 3 days",
    "Force active if last modified <= 7 days",
    "Force active if last modified <= 14 days",
    "Force active if last modified <= 30 days",
    "Force active if last modified <= 60 days",
    "Force active if last modified <= 90 days",
    "Force active if last modified <= 180 days",
    "Force active if last modified <= 365 days"
  ],
  "example": [
    "Active if last modified <= 90 days"
  ],
  "default": "Skip"
}

AWS > Logs > Log Group > Approved

Determine the action to take when an AWS Logs log group is not approved based on AWS > Logs > Log Group > Approved > * policies.

The Approved control checks the status of the defined Approved sub-policies for the resource. If the resource is not approved according to any of these policies, this control raises an alarm and takes the defined enforcement action.

For any enforcement actions that specify if new, e.g., Enforce: Delete unapproved if new, this control will only take the enforcement actions for resources created within the last 60 minutes.

See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logGroupApproved

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Check: Approved",
  "Enforce: Delete unapproved if new"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Approved",
    "Enforce: Delete unapproved if new"
  ],
  "example": [
    "Check: Approved"
  ],
  "default": "Skip"
}

AWS > Logs > Log Group > Approved > Budget

The policy allows you to set log groups to unapproved based on the current budget state, as reflected in AWS > Account > Budget > State

This policy will be evaluated by the Approved control. If an AWS Logs log group is not matched by the approved list, it will be subject to the action specified in the AWS > Logs > Log Group > Approved policy.

See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logGroupApprovedBudget

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Unapproved if Budget > State is Over or higher",
  "Unapproved if Budget > State is Critical or higher",
  "Unapproved if Budget > State is Shutdown"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Unapproved if Budget > State is Over or higher",
    "Unapproved if Budget > State is Critical or higher",
    "Unapproved if Budget > State is Shutdown"
  ],
  "example": [
    "Unapproved if Budget > State is Shutdown"
  ],
  "default": "Skip"
}

AWS > Logs > Log Group > Approved > Custom

Determine whether the AWS Logs log group is allowed to exist. This policy will be evaluated by the Approved control. If an AWS Logs log group is not approved, it will be subject to the action specified in the AWS > Logs > Log Group > Approved policy. See Approved for more information.

Note: The policy value must be a string with a value of Approved, Not approved or Skip, or in the form of YAML objects. The object(s) must contain the key result with its value as Approved or Not approved. A custom title and message can also be added using the keys title and message respectively.

URI

tmod:@turbot/aws-logs#/policy/types/logGroupApprovedCustom

Category

Parent

Targets

Schema

{
  "example": [
    "Approved",
    "Not approved",
    "Skip",
    {
      "result": "Approved"
    },
    {
      "title": "string",
      "result": "Not approved"
    },
    {
      "title": "string",
      "result": "Approved",
      "message": "string"
    },
    [
      {
        "title": "string",
        "result": "Approved",
        "message": "string"
      },
      {
        "title": "string",
        "result": "Not approved",
        "message": "string"
      }
    ]
  ],
  "anyOf": [
    {
      "type": "array",
      "items": {
        "type": "object",
        "properties": {
          "title": {
            "type": "string",
            "pattern": "^[\\W\\w]{1,32}$"
          },
          "message": {
            "type": "string",
            "pattern": "^[\\W\\w]{1,128}$"
          },
          "result": {
            "type": "string",
            "pattern": "^(Approved|Not approved|Skip)$"
          }
        },
        "required": [
          "result"
        ],
        "additionalProperties": false
      }
    },
    {
      "type": "object",
      "properties": {
        "title": {
          "type": "string",
          "pattern": "^[\\W\\w]{1,32}$"
        },
        "message": {
          "type": "string",
          "pattern": "^[\\W\\w]{1,128}$"
        },
        "result": {
          "type": "string",
          "pattern": "^(Approved|Not approved|Skip)$"
        }
      },
      "required": [
        "result"
      ],
      "additionalProperties": false
    },
    {
      "type": "string",
      "pattern": "^(Approved|Not approved|Skip)$"
    }
  ],
  "default": "Skip"
}

AWS > Logs > Log Group > Approved > Regions

A list of AWS regions in which AWS Logs log groups are approved for use.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

This policy will be evaluated by the Approved control. If an AWS Logs log group is created in a region that is not in the approved list, it will be subject to the action specified in the AWS > Logs > Log Group > Approved policy.

See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logGroupApprovedRegions

Category

Parent

Targets

Default Template Input

"{\n  regions: policy(uri: \"tmod:@turbot/aws-logs#/policy/types/logsApprovedRegionsDefault\")\n}\n"

Default Template

"{% if $.regions | length == 0 %} [] {% endif %}{% for item in $.regions %}- &#39;{{ item }}&#39;\n{% endfor %}"

Schema

AWS > Logs > Log Group > Approved > Usage

Determine whether the AWS Logs log group is allowed to exist.

This policy will be evaluated by the Approved control. If an AWS Logs log group is not approved, it will be subject to the action specified in the AWS > Logs > Log Group > Approved policy.

See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logGroupApprovedUsage

Category

Parent

Targets

Valid Value

[
  "Not approved",
  "Approved",
  "Approved if AWS > Logs > Enabled"
]

Schema

{
  "type": "string",
  "enum": [
    "Not approved",
    "Approved",
    "Approved if AWS > Logs > Enabled"
  ],
  "example": [
    "Not approved"
  ],
  "default": "Approved if AWS > Logs > Enabled"
}

AWS > Logs > Log Group > CMDB

Configure whether to record and synchronize details for the AWS Logs log group into the CMDB.

The CMDB control is responsible for populating and updating all the attributes for that resource type in the Turbot CMDB. All policies and controls in Turbot are based around the resource, so usually the CMDB policy is set to "Enforce: Enabled".

If set to Skip then all changes to the CMDB are paused - no new resources will be discovered, no updates will be made and deleted resources will not be removed.

To cleanup resources and stop tracking changes, set this policy to "Enforce: Disabled".

CMDB controls also use the Regions policy associated with the resource. If region is not in AWS > Logs > Log Group > Regions policy, the CMDB control will delete the resource from the CMDB.

(Note: Setting CMDB to "Skip" will also pause these changes.)

URI

tmod:@turbot/aws-logs#/policy/types/logGroupCmdb

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Enforce: Enabled",
  "Enforce: Disabled"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Enforce: Enabled",
    "Enforce: Disabled"
  ],
  "example": [
    "Skip"
  ],
  "default": "Skip"
}

AWS > Logs > Log Group > Configured

Determine how to configure this resource.

Note: If the resource is managed by another stack, then the Skip/Check/Enforce values here are ignored and inherit from the stack that owns it

URI

tmod:@turbot/aws-logs#/policy/types/logGroupConfigured

Category

Parent

Targets

Valid Value

[
  "Skip (unless claimed by a stack)",
  "Check: Per Configured > Source (unless claimed by a stack)",
  "Enforce: Per Configured > Source (unless claimed by a stack)"
]

Schema

{
  "enum": [
    "Skip (unless claimed by a stack)",
    "Check: Per Configured > Source (unless claimed by a stack)",
    "Enforce: Per Configured > Source (unless claimed by a stack)"
  ],
  "default": "Skip (unless claimed by a stack)"
}

AWS > Logs > Log Group > Configured > Claim Precedence

An ordered list of who is allowed to claim a resource. A stack cannot claim a resource if it is already claimed by another stack at a higher level of precedence.

URI

tmod:@turbot/aws-logs#/policy/types/logGroupConfiguredPrecedence

Category

AWS > Logs > Log Group > Configured

Parent

Targets

Default Template Input

"{\n  defaultPrecedence: policy(uri:\"tmod:@turbot/turbot#/policy/types/claimPrecedenceDefault\")\n}\n"

Default Template

"{%- if $.defaultPrecedence | length == 0 %}[]{%- else %}{% for item in $.defaultPrecedence %}- &#39;{{ item }}&#39;{% endfor %}{% endif %}"

Schema

{
  "type": "array",
  "items": {
    "type": "string"
  }
}

AWS > Logs > Log Group > Configured > Source

A HCL or JSON format Terraform configuration source used to configure this resource

URI

tmod:@turbot/aws-logs#/policy/types/logGroupConfiguredSource

Category

AWS > Logs > Log Group > Configured

Parent

Targets

Resource > Encryption at Rest

Schema

{
  "type": "string",
  "default": "",
  "x-schema-form": {
    "type": "code",
    "language": "hcl"
  }
}

AWS > Logs > Log Group > Encryption at Rest

Define the Encryption at Rest settings required for AWS > Logs > Log Group.

Encryption at Rest refers specifically to the encryption of data when written to an underlying storage system. This control determines whether the resource is encrypted at rest, and sets encryption to your desired level.

The Encryption at Rest control compares the encryption settings against the encryption policies for the resource (AWS > Logs > Log Group > Encryption at Rest > *), raises an alarm, and takes the defined enforcement action

URI

tmod:@turbot/aws-logs#/policy/types/logGroupEncryptionAtRest

Category

Parent

Targets

Resource > Encryption at Rest

Valid Value

[
  "Skip",
  "Check: AWS SSE",
  "Check: AWS SSE or higher",
  "Check: Customer managed key",
  "Check: Encryption at Rest > Customer Managed Key",
  "Enforce: AWS SSE",
  "Enforce: AWS SSE or higher",
  "Enforce: Customer managed key",
  "Enforce: Encryption at Rest > Customer Managed Key"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Check: AWS SSE",
    "Check: AWS SSE or higher",
    "Check: Customer managed key",
    "Check: Encryption at Rest > Customer Managed Key",
    "Enforce: AWS SSE",
    "Enforce: AWS SSE or higher",
    "Enforce: Customer managed key",
    "Enforce: Encryption at Rest > Customer Managed Key"
  ],
  "example": [
    "Check: None or higher"
  ],
  "default": "Skip"
}

AWS > Logs > Log Group > Encryption at Rest > Customer Managed Key

Define the KMS key ID for encryption at rest.

Please make sure the key defined in the template has required permissions.

example:
  alias/aws/ebs
  ddc06e04-ce5f-4995-c758-c2b6c510e8fd
  arn:aws:kms:us-east-1:123456789012:key/ddc06e04-ce5f-4995-c758-c2b6c510e8fd
  arn:aws:kms:us-east-1:123456789012:alias/aws/ebs

URI

tmod:@turbot/aws-logs#/policy/types/logGroupEncryptionAtRestCustomerManagedKey

Category

Parent

AWS > Logs > Log Group > Encryption at Rest

Targets

Default Template Input

"{\n  defaultKey: policy(uri: \"aws-kms#/policy/types/keyDefaultCustomerManagedKey\")\n}\n"

Default Template

"{{ $.defaultKey }}"

Schema

{
  "anyOf": [
    {
      "type": "string",
      "pattern": "^alias/[a-zA-Z0-9:/_-]{1,249}$"
    },
    {
      "type": "string",
      "pattern": "^[-a-z0-9-]{1,255}$"
    },
    {
      "type": "string",
      "pattern": "^arn:aws(-us-gov|-cn)?:kms:[a-z]{2}(-gov)?-[a-z]+-[0-9]:[0-9]{12}:key/[-a-z0-9-]{1,255}$"
    },
    {
      "type": "string",
      "pattern": "^arn:aws(-us-gov|-cn)?:kms:[a-z]{2}(-gov)?-[a-z]+-[0-9]:[0-9]{12}:alias/[a-zA-Z0-9:/_-]{1,249}$"
    }
  ],
  "tests": [
    {
      "description": "valid - if keyArn",
      "input": "arn:aws:kms:us-east-1:039305405804:key/ddc06e04-ce5f-4995-b758-c2b6c510e8fd"
    },
    {
      "description": "valid - if aliasName",
      "input": "alias/aws/ebs"
    },
    {
      "description": "valid - if keyId",
      "input": "ddc06e04-ce5f-4995-b758-c2b6c510e8fd"
    },
    {
      "description": "valid - if aliasArn",
      "input": "arn:aws:kms:us-east-1:039305405804:alias/aws/ebs"
    }
  ]
}

AWS > Logs > Log Group > Regions

A list of AWS regions in which AWS Logs log groups are supported for use.

Any log groups in a region not listed here will not be recorded in CMDB.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

URI

tmod:@turbot/aws-logs#/policy/types/logGroupRegions

Category

Parent

Targets

Schema

{
  "allOf": [
    {
      "$ref": "aws#/definitions/regionNameMatcherList"
    },
    {
      "default": [
        "ap-east-1",
        "ap-northeast-1",
        "ap-northeast-2",
        "ap-northeast-3",
        "ap-south-1",
        "ap-southeast-1",
        "ap-southeast-2",
        "ca-central-1",
        "cn-north-1",
        "cn-northwest-1",
        "eu-central-1",
        "eu-north-1",
        "eu-west-1",
        "eu-west-2",
        "eu-west-3",
        "me-south-1",
        "sa-east-1",
        "us-east-1",
        "us-east-2",
        "us-gov-east-1",
        "us-gov-west-1",
        "us-west-1",
        "us-west-2"
      ]
    }
  ]
}

AWS > Logs > Log Group > Tags

Determine the action to take when an AWS Logs log group tags are not updated based on the AWS > Logs > Log Group > Tags > * policies.

The control ensure AWS Logs log group tags include tags defined in AWS > Logs > Log Group > Tags > Template.

Tags not defined in Log Group Tags Template will not be modified or deleted. Setting a tag value to undefined will result in the tag being deleted.

See Tags for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logGroupTags

Category

Resource > Tags

Parent

Targets

AWS > Logs > Log Group > Tags

Valid Value

[
  "Skip",
  "Check: Tags are correct",
  "Enforce: Set tags"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Tags are correct",
    "Enforce: Set tags"
  ],
  "example": [
    "Check: Tags are correct"
  ],
  "default": "Skip"
}

AWS > Logs > Log Group > Tags > Template

The template is used to generate the keys and values for AWS Logs log group.

Tags not defined in Log Group Tags Template will not be modified or deleted. Setting a tag value to undefined will result in the tag being deleted.

See Tags for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logGroupTagsTemplate

Category

Resource > Tags

Parent

Targets

aws#/definitions/tagsTemplateInput

Default Template Input

[
  "{\n  account {\n    turbot {\n      id\n    }\n  }\n}\n",
  "{\n  defaultTags: policyValue(uri:\"tmod:@turbot/aws-logs#/policy/types/logsTagsTemplate\" resourceId: \"{{ $.account.turbot.id }}\") {\n    value\n  }\n}\n"
]

Default Template

"{%- if $.defaultTags.value | length == 0 %} [] {%- elif $.defaultTags.value != undefined %}{{ $.defaultTags.value | dump | safe }}{%- else %}{% for item in $.defaultTags.value %}- {{ item }}{% endfor %}{% endif %}"

Schema

AWS > Logs > Log Group > Usage

Configure the number of AWS Logs log groups that can be used for this region and the current consumption against the limit.

You can configure the behavior of the control with this AWS > Logs > Log Group > Usage policy.

URI

tmod:@turbot/aws-logs#/policy/types/logGroupUsage

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Check: Usage <= 85% of Limit",
  "Check: Usage <= 100% of Limit"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Usage <= 85% of Limit",
    "Check: Usage <= 100% of Limit"
  ],
  "example": [
    "Check: Usage <= 85% of Limit"
  ],
  "default": "Skip"
}

AWS > Logs > Log Group > Usage > Limit

Maximum number of items that can be created for this region.

URI

tmod:@turbot/aws-logs#/policy/types/logGroupUsageLimit

Category

AWS > Logs > Log Group > Usage

Parent

Targets

Schema

{
  "type": "integer",
  "minimum": 0,
  "default": 5000
}

AWS > Logs > Log Stream > Active

Determine the action to take when an AWS Logs log stream, based on the AWS > Logs > Log Stream > Active > * policies.

The Active control checks the status of all defined Active policies for the resource (AWS > Logs > Log Stream > Active > *), raises an alarm, and takes the defined enforcement action. Each Active sub-policy can calculate a status of active, inactive or skipped. Generally, if the resource appears to be Active for any reason it will be considered Active. Note the contrast with Approved, where if the resource appears to be Unapproved for any reason it will be considered Unapproved.

See Active for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logStreamActive

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Check: Active",
  "Enforce: Delete inactive with 1 day warning",
  "Enforce: Delete inactive with 3 days warning",
  "Enforce: Delete inactive with 7 days warning",
  "Enforce: Delete inactive with 14 days warning",
  "Enforce: Delete inactive with 30 days warning",
  "Enforce: Delete inactive with 60 days warning",
  "Enforce: Delete inactive with 90 days warning",
  "Enforce: Delete inactive with 180 days warning",
  "Enforce: Delete inactive with 365 days warning"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Active",
    "Enforce: Delete inactive with 1 day warning",
    "Enforce: Delete inactive with 3 days warning",
    "Enforce: Delete inactive with 7 days warning",
    "Enforce: Delete inactive with 14 days warning",
    "Enforce: Delete inactive with 30 days warning",
    "Enforce: Delete inactive with 60 days warning",
    "Enforce: Delete inactive with 90 days warning",
    "Enforce: Delete inactive with 180 days warning",
    "Enforce: Delete inactive with 365 days warning"
  ],
  "example": [
    "Check: Active"
  ],
  "default": "Skip"
}

AWS > Logs > Log Stream > Active > Age

The age after which the AWS Logs log stream is no longer considered active. If a create time is unavailable, the time Turbot discovered the resource is used.

See Active for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logStreamActiveAge

Category

AWS > Logs > Log Stream > Active

Parent

Targets

Valid Value

[
  "Skip",
  "Force inactive if age > 1 day",
  "Force inactive if age > 3 days",
  "Force inactive if age > 7 days",
  "Force inactive if age > 14 days",
  "Force inactive if age > 30 days",
  "Force inactive if age > 60 days",
  "Force inactive if age > 90 days",
  "Force inactive if age > 180 days",
  "Force inactive if age > 365 days"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Force inactive if age > 1 day",
    "Force inactive if age > 3 days",
    "Force inactive if age > 7 days",
    "Force inactive if age > 14 days",
    "Force inactive if age > 30 days",
    "Force inactive if age > 60 days",
    "Force inactive if age > 90 days",
    "Force inactive if age > 180 days",
    "Force inactive if age > 365 days"
  ],
  "example": [
    "Force inactive if age > 90 days"
  ],
  "default": "Skip"
}

AWS > Logs > Log Stream > Active > Budget

The impact of the budget state on the active control. This policy allows you to force logStreams to inactive based on the current budget state, as reflected in AWS > Account > Budget > State

See Active for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logStreamActiveBudget

Category

AWS > Logs > Log Stream > Active

Parent

Targets

Valid Value

[
  "Skip",
  "Force inactive if Budget > State is Over or higher",
  "Force inactive if Budget > State is Critical or higher",
  "Force inactive if Budget > State is Shutdown"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Force inactive if Budget > State is Over or higher",
    "Force inactive if Budget > State is Critical or higher",
    "Force inactive if Budget > State is Shutdown"
  ],
  "example": [
    "Skip"
  ],
  "default": "Skip"
}

AWS > Logs > Log Stream > Active > Last Modified

The number of days since the AWS Logs log stream was last modified before it is considered inactive.

See Active for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logStreamActiveLastModified

Category

AWS > Logs > Log Stream > Active

Parent

Targets

Valid Value

[
  "Skip",
  "Active if last modified <= 1 day",
  "Active if last modified <= 3 days",
  "Active if last modified <= 7 days",
  "Active if last modified <= 14 days",
  "Active if last modified <= 30 days",
  "Active if last modified <= 60 days",
  "Active if last modified <= 90 days",
  "Active if last modified <= 180 days",
  "Active if last modified <= 365 days",
  "Force active if last modified <= 1 day",
  "Force active if last modified <= 3 days",
  "Force active if last modified <= 7 days",
  "Force active if last modified <= 14 days",
  "Force active if last modified <= 30 days",
  "Force active if last modified <= 60 days",
  "Force active if last modified <= 90 days",
  "Force active if last modified <= 180 days",
  "Force active if last modified <= 365 days"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Active if last modified <= 1 day",
    "Active if last modified <= 3 days",
    "Active if last modified <= 7 days",
    "Active if last modified <= 14 days",
    "Active if last modified <= 30 days",
    "Active if last modified <= 60 days",
    "Active if last modified <= 90 days",
    "Active if last modified <= 180 days",
    "Active if last modified <= 365 days",
    "Force active if last modified <= 1 day",
    "Force active if last modified <= 3 days",
    "Force active if last modified <= 7 days",
    "Force active if last modified <= 14 days",
    "Force active if last modified <= 30 days",
    "Force active if last modified <= 60 days",
    "Force active if last modified <= 90 days",
    "Force active if last modified <= 180 days",
    "Force active if last modified <= 365 days"
  ],
  "example": [
    "Active if last modified <= 90 days"
  ],
  "default": "Skip"
}

AWS > Logs > Log Stream > Approved

Determine the action to take when an AWS Logs log stream is not approved based on AWS > Logs > Log Stream > Approved > * policies.

For any enforcement actions that specify if new, e.g., Enforce: Delete unapproved if new, this control will only take the enforcement actions for resources created within the last 60 minutes.

See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logStreamApproved

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Check: Approved",
  "Enforce: Delete unapproved if new"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Approved",
    "Enforce: Delete unapproved if new"
  ],
  "example": [
    "Check: Approved"
  ],
  "default": "Skip"
}

AWS > Logs > Log Stream > Approved > Budget

The policy allows you to set log streams to unapproved based on the current budget state, as reflected in AWS > Account > Budget > State

This policy will be evaluated by the Approved control. If an AWS Logs log stream is not matched by the approved list, it will be subject to the action specified in the AWS > Logs > Log Stream > Approved policy.

See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logStreamApprovedBudget

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Unapproved if Budget > State is Over or higher",
  "Unapproved if Budget > State is Critical or higher",
  "Unapproved if Budget > State is Shutdown"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Unapproved if Budget > State is Over or higher",
    "Unapproved if Budget > State is Critical or higher",
    "Unapproved if Budget > State is Shutdown"
  ],
  "example": [
    "Unapproved if Budget > State is Shutdown"
  ],
  "default": "Skip"
}

AWS > Logs > Log Stream > Approved > Custom

Determine whether the AWS Logs log stream is allowed to exist. This policy will be evaluated by the Approved control. If an AWS Logs log stream is not approved, it will be subject to the action specified in the AWS > Logs > Log Stream > Approved policy. See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logStreamApprovedCustom

Category

Parent

Targets

Schema

{
  "example": [
    "Approved",
    "Not approved",
    "Skip",
    {
      "result": "Approved"
    },
    {
      "title": "string",
      "result": "Not approved"
    },
    {
      "title": "string",
      "result": "Approved",
      "message": "string"
    },
    [
      {
        "title": "string",
        "result": "Approved",
        "message": "string"
      },
      {
        "title": "string",
        "result": "Not approved",
        "message": "string"
      }
    ]
  ],
  "anyOf": [
    {
      "type": "array",
      "items": {
        "type": "object",
        "properties": {
          "title": {
            "type": "string",
            "pattern": "^[\\W\\w]{1,32}$"
          },
          "message": {
            "type": "string",
            "pattern": "^[\\W\\w]{1,128}$"
          },
          "result": {
            "type": "string",
            "pattern": "^(Approved|Not approved|Skip)$"
          }
        },
        "required": [
          "result"
        ],
        "additionalProperties": false
      }
    },
    {
      "type": "object",
      "properties": {
        "title": {
          "type": "string",
          "pattern": "^[\\W\\w]{1,32}$"
        },
        "message": {
          "type": "string",
          "pattern": "^[\\W\\w]{1,128}$"
        },
        "result": {
          "type": "string",
          "pattern": "^(Approved|Not approved|Skip)$"
        }
      },
      "required": [
        "result"
      ],
      "additionalProperties": false
    },
    {
      "type": "string",
      "pattern": "^(Approved|Not approved|Skip)$"
    }
  ],
  "default": "Skip"
}

AWS > Logs > Log Stream > Approved > Regions

A list of AWS regions in which AWS Logs log streams are approved for use.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

This policy will be evaluated by the Approved control. If an AWS Logs log stream is created in a region that is not in the approved list, it will be subject to the action specified in the AWS > Logs > Log Stream > Approved policy.

See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logStreamApprovedRegions

Category

Parent

Targets

Default Template Input

"{\n  regions: policy(uri: \"tmod:@turbot/aws-logs#/policy/types/logsApprovedRegionsDefault\")\n}\n"

Default Template

"{% if $.regions | length == 0 %} [] {% endif %}{% for item in $.regions %}- &#39;{{ item }}&#39;\n{% endfor %}"

Schema

AWS > Logs > Log Stream > Approved > Usage

Determine whether the AWS Logs log stream is allowed to exist.

This policy will be evaluated by the Approved control. If an AWS Logs log stream is not approved, it will be subject to the action specified in the AWS > Logs > Log Stream > Approved policy.

See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/logStreamApprovedUsage

Category

Parent

Targets

Valid Value

[
  "Not approved",
  "Approved",
  "Approved if AWS > Logs > Enabled"
]

Schema

{
  "type": "string",
  "enum": [
    "Not approved",
    "Approved",
    "Approved if AWS > Logs > Enabled"
  ],
  "example": [
    "Not approved"
  ],
  "default": "Approved if AWS > Logs > Enabled"
}

AWS > Logs > Log Stream > CMDB

Configure whether to record and synchronize details for the AWS Logs log stream into the CMDB.

If set to Skip then all changes to the CMDB are paused - no new resources will be discovered, no updates will be made and deleted resources will not be removed.

To cleanup resources and stop tracking changes, set this policy to "Enforce: Disabled".

CMDB controls also use the Regions policy associated with the resource. If region is not in AWS > Logs > Log Stream > Regions policy, the CMDB control will delete the resource from the CMDB.

(Note: Setting CMDB to "Skip" will also pause these changes.)

URI

tmod:@turbot/aws-logs#/policy/types/logStreamCmdb

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Enforce: Enabled",
  "Enforce: Disabled"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Enforce: Enabled",
    "Enforce: Disabled"
  ],
  "example": [
    "Skip"
  ],
  "default": "Skip"
}

AWS > Logs > Log Stream > Configured

Determine how to configure this resource.

Note: If the resource is managed by another stack, then the Skip/Check/Enforce values here are ignored and inherit from the stack that owns it

URI

tmod:@turbot/aws-logs#/policy/types/logStreamConfigured

Category

Parent

Targets

Valid Value

[
  "Skip (unless claimed by a stack)",
  "Check: Per Configured > Source (unless claimed by a stack)",
  "Enforce: Per Configured > Source (unless claimed by a stack)"
]

Schema

{
  "enum": [
    "Skip (unless claimed by a stack)",
    "Check: Per Configured > Source (unless claimed by a stack)",
    "Enforce: Per Configured > Source (unless claimed by a stack)"
  ],
  "default": "Skip (unless claimed by a stack)"
}

AWS > Logs > Log Stream > Configured > Claim Precedence

An ordered list of who is allowed to claim a resource. A stack cannot claim a resource if it is already claimed by another stack at a higher level of precedence.

URI

tmod:@turbot/aws-logs#/policy/types/logStreamConfiguredPrecedence

Category

AWS > Logs > Log Stream > Configured

Parent

Targets

Default Template Input

"{\n  defaultPrecedence: policy(uri:\"tmod:@turbot/turbot#/policy/types/claimPrecedenceDefault\")\n}\n"

Default Template

"{%- if $.defaultPrecedence | length == 0 %}[]{%- else %}{% for item in $.defaultPrecedence %}- &#39;{{ item }}&#39;{% endfor %}{% endif %}"

Schema

{
  "type": "array",
  "items": {
    "type": "string"
  }
}

AWS > Logs > Log Stream > Configured > Source

A HCL or JSON format Terraform configuration source used to configure this resource

URI

tmod:@turbot/aws-logs#/policy/types/logStreamConfiguredSource

Category

AWS > Logs > Log Stream > Configured

Parent

Targets

Schema

{
  "type": "string",
  "default": "",
  "x-schema-form": {
    "type": "code",
    "language": "hcl"
  }
}

AWS > Logs > Log Stream > Regions

A list of AWS regions in which AWS Logs log streams are supported for use.

Any log streams in a region not listed here will not be recorded in CMDB.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

URI

tmod:@turbot/aws-logs#/policy/types/logStreamRegions

Category

Parent

Targets

Default Template Input

"{\n  regions: policyValue(uri:\"tmod:@turbot/aws-logs#/policy/types/logsRegionsDefault\") {\n    value\n  }\n}\n"

Default Template

"{% if $.regions.value | length == 0 %} [] {% endif %}{% for item in $.regions.value %}- &#39;{{ item }}&#39;\n{% endfor %}"

Schema

AWS > Logs > Log Stream > Usage

Configure the number of AWS Logs log streams that can be used for this region and the current consumption against the limit.

You can configure the behavior of the control with this AWS > Logs > Log Stream > Usage policy.

URI

tmod:@turbot/aws-logs#/policy/types/logStreamUsage

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Check: Usage <= 85% of Limit",
  "Check: Usage <= 100% of Limit"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Usage <= 85% of Limit",
    "Check: Usage <= 100% of Limit"
  ],
  "example": [
    "Check: Usage <= 85% of Limit"
  ],
  "default": "Skip"
}

AWS > Logs > Log Stream > Usage > Limit

Maximum number of items that can be created for this region.

URI

tmod:@turbot/aws-logs#/policy/types/logStreamUsageLimit

Category

AWS > Logs > Log Stream > Usage

Parent

Targets

Schema

{
  "type": "integer",
  "minimum": 0,
  "default": 50
}

AWS > Logs > Metric Filter > Active

Determine the action to take when an AWS Logs metric filter, based on the AWS > Logs > Metric Filter > Active > * policies.

The Active control checks the status of all defined Active policies for the resource (AWS > Logs > Metric Filter > Active > *), raises an alarm, and takes the defined enforcement action. Each Active sub-policy can calculate a status of active, inactive or skipped. Generally, if the resource appears to be Active for any reason it will be considered Active. Note the contrast with Approved, where if the resource appears to be Unapproved for any reason it will be considered Unapproved.

See Active for more information.

URI

tmod:@turbot/aws-logs#/policy/types/metricFilterActive

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Check: Active",
  "Enforce: Delete inactive with 1 day warning",
  "Enforce: Delete inactive with 3 days warning",
  "Enforce: Delete inactive with 7 days warning",
  "Enforce: Delete inactive with 14 days warning",
  "Enforce: Delete inactive with 30 days warning",
  "Enforce: Delete inactive with 60 days warning",
  "Enforce: Delete inactive with 90 days warning",
  "Enforce: Delete inactive with 180 days warning",
  "Enforce: Delete inactive with 365 days warning"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Active",
    "Enforce: Delete inactive with 1 day warning",
    "Enforce: Delete inactive with 3 days warning",
    "Enforce: Delete inactive with 7 days warning",
    "Enforce: Delete inactive with 14 days warning",
    "Enforce: Delete inactive with 30 days warning",
    "Enforce: Delete inactive with 60 days warning",
    "Enforce: Delete inactive with 90 days warning",
    "Enforce: Delete inactive with 180 days warning",
    "Enforce: Delete inactive with 365 days warning"
  ],
  "example": [
    "Check: Active"
  ],
  "default": "Skip"
}

AWS > Logs > Metric Filter > Active > Age

The age after which the AWS Logs metric filter is no longer considered active. If a create time is unavailable, the time Turbot discovered the resource is used.

See Active for more information.

URI

tmod:@turbot/aws-logs#/policy/types/metricFilterActiveAge

Category

AWS > Logs > Metric Filter > Active

Parent

Targets

Valid Value

[
  "Skip",
  "Force inactive if age > 1 day",
  "Force inactive if age > 3 days",
  "Force inactive if age > 7 days",
  "Force inactive if age > 14 days",
  "Force inactive if age > 30 days",
  "Force inactive if age > 60 days",
  "Force inactive if age > 90 days",
  "Force inactive if age > 180 days",
  "Force inactive if age > 365 days"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Force inactive if age > 1 day",
    "Force inactive if age > 3 days",
    "Force inactive if age > 7 days",
    "Force inactive if age > 14 days",
    "Force inactive if age > 30 days",
    "Force inactive if age > 60 days",
    "Force inactive if age > 90 days",
    "Force inactive if age > 180 days",
    "Force inactive if age > 365 days"
  ],
  "example": [
    "Force inactive if age > 90 days"
  ],
  "default": "Skip"
}

AWS > Logs > Metric Filter > Active > Budget

The impact of the budget state on the active control. This policy allows you to force metricFilters to inactive based on the current budget state, as reflected in AWS > Account > Budget > State

See Active for more information.

URI

tmod:@turbot/aws-logs#/policy/types/metricFilterActiveBudget

Category

AWS > Logs > Metric Filter > Active

Parent

Targets

Valid Value

[
  "Skip",
  "Force inactive if Budget > State is Over or higher",
  "Force inactive if Budget > State is Critical or higher",
  "Force inactive if Budget > State is Shutdown"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Force inactive if Budget > State is Over or higher",
    "Force inactive if Budget > State is Critical or higher",
    "Force inactive if Budget > State is Shutdown"
  ],
  "example": [
    "Skip"
  ],
  "default": "Skip"
}

AWS > Logs > Metric Filter > Active > Last Modified

The number of days since the AWS Logs metric filter was last modified before it is considered inactive.

See Active for more information.

URI

tmod:@turbot/aws-logs#/policy/types/metricFilterActiveLastModified

Category

AWS > Logs > Metric Filter > Active

Parent

Targets

Valid Value

[
  "Skip",
  "Active if last modified <= 1 day",
  "Active if last modified <= 3 days",
  "Active if last modified <= 7 days",
  "Active if last modified <= 14 days",
  "Active if last modified <= 30 days",
  "Active if last modified <= 60 days",
  "Active if last modified <= 90 days",
  "Active if last modified <= 180 days",
  "Active if last modified <= 365 days",
  "Force active if last modified <= 1 day",
  "Force active if last modified <= 3 days",
  "Force active if last modified <= 7 days",
  "Force active if last modified <= 14 days",
  "Force active if last modified <= 30 days",
  "Force active if last modified <= 60 days",
  "Force active if last modified <= 90 days",
  "Force active if last modified <= 180 days",
  "Force active if last modified <= 365 days"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Active if last modified <= 1 day",
    "Active if last modified <= 3 days",
    "Active if last modified <= 7 days",
    "Active if last modified <= 14 days",
    "Active if last modified <= 30 days",
    "Active if last modified <= 60 days",
    "Active if last modified <= 90 days",
    "Active if last modified <= 180 days",
    "Active if last modified <= 365 days",
    "Force active if last modified <= 1 day",
    "Force active if last modified <= 3 days",
    "Force active if last modified <= 7 days",
    "Force active if last modified <= 14 days",
    "Force active if last modified <= 30 days",
    "Force active if last modified <= 60 days",
    "Force active if last modified <= 90 days",
    "Force active if last modified <= 180 days",
    "Force active if last modified <= 365 days"
  ],
  "example": [
    "Active if last modified <= 90 days"
  ],
  "default": "Skip"
}

AWS > Logs > Metric Filter > Approved

Determine the action to take when an AWS Logs metric filter is not approved based on AWS > Logs > Metric Filter > Approved > * policies.

For any enforcement actions that specify if new, e.g., Enforce: Delete unapproved if new, this control will only take the enforcement actions for resources created within the last 60 minutes.

See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/metricFilterApproved

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Check: Approved",
  "Enforce: Delete unapproved if new"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Approved",
    "Enforce: Delete unapproved if new"
  ],
  "example": [
    "Check: Approved"
  ],
  "default": "Skip"
}

AWS > Logs > Metric Filter > Approved > Budget

The policy allows you to set metric filters to unapproved based on the current budget state, as reflected in AWS > Account > Budget > State

This policy will be evaluated by the Approved control. If an AWS Logs metric filter is not matched by the approved list, it will be subject to the action specified in the AWS > Logs > Metric Filter > Approved policy.

See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/metricFilterApprovedBudget

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Unapproved if Budget > State is Over or higher",
  "Unapproved if Budget > State is Critical or higher",
  "Unapproved if Budget > State is Shutdown"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Unapproved if Budget > State is Over or higher",
    "Unapproved if Budget > State is Critical or higher",
    "Unapproved if Budget > State is Shutdown"
  ],
  "example": [
    "Unapproved if Budget > State is Shutdown"
  ],
  "default": "Skip"
}

AWS > Logs > Metric Filter > Approved > Custom

Determine whether the AWS Logs metric filter is allowed to exist. This policy will be evaluated by the Approved control. If an AWS Logs metric filter is not approved, it will be subject to the action specified in the AWS > Logs > Metric Filter > Approved policy. See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/metricFilterApprovedCustom

Category

Parent

Targets

Schema

{
  "example": [
    "Approved",
    "Not approved",
    "Skip",
    {
      "result": "Approved"
    },
    {
      "title": "string",
      "result": "Not approved"
    },
    {
      "title": "string",
      "result": "Approved",
      "message": "string"
    },
    [
      {
        "title": "string",
        "result": "Approved",
        "message": "string"
      },
      {
        "title": "string",
        "result": "Not approved",
        "message": "string"
      }
    ]
  ],
  "anyOf": [
    {
      "type": "array",
      "items": {
        "type": "object",
        "properties": {
          "title": {
            "type": "string",
            "pattern": "^[\\W\\w]{1,32}$"
          },
          "message": {
            "type": "string",
            "pattern": "^[\\W\\w]{1,128}$"
          },
          "result": {
            "type": "string",
            "pattern": "^(Approved|Not approved|Skip)$"
          }
        },
        "required": [
          "result"
        ],
        "additionalProperties": false
      }
    },
    {
      "type": "object",
      "properties": {
        "title": {
          "type": "string",
          "pattern": "^[\\W\\w]{1,32}$"
        },
        "message": {
          "type": "string",
          "pattern": "^[\\W\\w]{1,128}$"
        },
        "result": {
          "type": "string",
          "pattern": "^(Approved|Not approved|Skip)$"
        }
      },
      "required": [
        "result"
      ],
      "additionalProperties": false
    },
    {
      "type": "string",
      "pattern": "^(Approved|Not approved|Skip)$"
    }
  ],
  "default": "Skip"
}

AWS > Logs > Metric Filter > Approved > Regions

A list of AWS regions in which AWS Logs metric filters are approved for use.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

This policy will be evaluated by the Approved control. If an AWS Logs metric filter is created in a region that is not in the approved list, it will be subject to the action specified in the AWS > Logs > Metric Filter > Approved policy.

See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/metricFilterApprovedRegions

Category

Parent

Targets

Default Template Input

"{\n  regions: policy(uri: \"tmod:@turbot/aws-logs#/policy/types/logsApprovedRegionsDefault\")\n}\n"

Default Template

"{% if $.regions | length == 0 %} [] {% endif %}{% for item in $.regions %}- &#39;{{ item }}&#39;\n{% endfor %}"

Schema

AWS > Logs > Metric Filter > Approved > Usage

Determine whether the AWS Logs metric filter is allowed to exist.

This policy will be evaluated by the Approved control. If an AWS Logs metric filter is not approved, it will be subject to the action specified in the AWS > Logs > Metric Filter > Approved policy.

See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/metricFilterApprovedUsage

Category

Parent

Targets

Valid Value

[
  "Not approved",
  "Approved",
  "Approved if AWS > Logs > Enabled"
]

Schema

{
  "type": "string",
  "enum": [
    "Not approved",
    "Approved",
    "Approved if AWS > Logs > Enabled"
  ],
  "example": [
    "Not approved"
  ],
  "default": "Approved if AWS > Logs > Enabled"
}

AWS > Logs > Metric Filter > CMDB

Configure whether to record and synchronize details for the AWS Logs metric filter into the CMDB.

If set to Skip then all changes to the CMDB are paused - no new resources will be discovered, no updates will be made and deleted resources will not be removed.

To cleanup resources and stop tracking changes, set this policy to "Enforce: Disabled".

CMDB controls also use the Regions policy associated with the resource. If region is not in AWS > Logs > Metric Filter > Regions policy, the CMDB control will delete the resource from the CMDB.

(Note: Setting CMDB to "Skip" will also pause these changes.)

URI

tmod:@turbot/aws-logs#/policy/types/metricFilterCmdb

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Enforce: Enabled",
  "Enforce: Disabled"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Enforce: Enabled",
    "Enforce: Disabled"
  ],
  "example": [
    "Skip"
  ],
  "default": "Enforce: Enabled"
}

AWS > Logs > Metric Filter > Configured

Determine how to configure this resource.

Note: If the resource is managed by another stack, then the Skip/Check/Enforce values here are ignored and inherit from the stack that owns it

URI

tmod:@turbot/aws-logs#/policy/types/metricFilterConfigured

Category

Parent

Targets

Valid Value

[
  "Skip (unless claimed by a stack)",
  "Check: Per Configured > Source (unless claimed by a stack)",
  "Enforce: Per Configured > Source (unless claimed by a stack)"
]

Schema

{
  "enum": [
    "Skip (unless claimed by a stack)",
    "Check: Per Configured > Source (unless claimed by a stack)",
    "Enforce: Per Configured > Source (unless claimed by a stack)"
  ],
  "default": "Skip (unless claimed by a stack)"
}

AWS > Logs > Metric Filter > Configured > Claim Precedence

An ordered list of who is allowed to claim a resource. A stack cannot claim a resource if it is already claimed by another stack at a higher level of precedence.

URI

tmod:@turbot/aws-logs#/policy/types/metricFilterConfiguredPrecedence

Category

AWS > Logs > Metric Filter > Configured

Parent

Targets

Default Template Input

"{\n  defaultPrecedence: policy(uri:\"tmod:@turbot/turbot#/policy/types/claimPrecedenceDefault\")\n}\n"

Default Template

"{%- if $.defaultPrecedence | length == 0 %}[]{%- else %}{% for item in $.defaultPrecedence %}- &#39;{{ item }}&#39;{% endfor %}{% endif %}"

Schema

{
  "type": "array",
  "items": {
    "type": "string"
  }
}

AWS > Logs > Metric Filter > Configured > Source

A HCL or JSON format Terraform configuration source used to configure this resource

URI

tmod:@turbot/aws-logs#/policy/types/metricFilterConfiguredSource

Category

AWS > Logs > Metric Filter > Configured

Parent

Targets

Schema

{
  "type": "string",
  "default": "",
  "x-schema-form": {
    "type": "code",
    "language": "hcl"
  }
}

AWS > Logs > Metric Filter > Regions

A list of AWS regions in which AWS Logs metric filters are supported for use.

Any metric filters in a region not listed here will not be recorded in CMDB.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

URI

tmod:@turbot/aws-logs#/policy/types/metricFilterRegions

Category

Parent

Targets

Default Template Input

"{\n  regions: policyValue(uri:\"tmod:@turbot/aws-logs#/policy/types/logsRegionsDefault\") {\n    value\n  }\n}\n"

Default Template

"{% if $.regions.value | length == 0 %} [] {% endif %}{% for item in $.regions.value %}- &#39;{{ item }}&#39;\n{% endfor %}"

Schema

AWS > Logs > Metric Filter > Usage

Configure the number of AWS Logs metric filters that can be used for this region and the current consumption against the limit.

You can configure the behavior of the control with this AWS > Logs > Metric Filter > Usage policy.

URI

tmod:@turbot/aws-logs#/policy/types/metricFilterUsage

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Check: Usage <= 85% of Limit",
  "Check: Usage <= 100% of Limit"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Usage <= 85% of Limit",
    "Check: Usage <= 100% of Limit"
  ],
  "example": [
    "Check: Usage <= 85% of Limit"
  ],
  "default": "Skip"
}

AWS > Logs > Metric Filter > Usage > Limit

Maximum number of items that can be created for this region.

URI

tmod:@turbot/aws-logs#/policy/types/metricFilterUsageLimit

Category

AWS > Logs > Metric Filter > Usage

Parent

Targets

Schema

{
  "type": "integer",
  "minimum": 0,
  "default": 500000
}

AWS > Logs > Permissions

Configure whether permissions policies are in effect for AWS Logs.

This setting does not affect account level permissions (AWS/Admin, AWS/Owner, etc)

Note: The behavior of this policy depends on the value of AWS > Permissions.

URI

tmod:@turbot/aws-logs#/policy/types/logsPermissions

Category

Parent

Targets

Valid Value

[
  "Enabled",
  "Disabled",
  "Enabled if AWS > Logs > Enabled & AWS > Logs > API Enabled"
]

Schema

{
  "type": "string",
  "enum": [
    "Enabled",
    "Disabled",
    "Enabled if AWS > Logs > Enabled & AWS > Logs > API Enabled"
  ],
  "example": [
    "Enabled"
  ],
  "default": "Enabled if AWS > Logs > Enabled & AWS > Logs > API Enabled"
}

AWS > Logs > Permissions > Levels

Define the permissions levels that can be used to grant access to an AWS account. Permissions levels defined will appear in the UI to assign access to Turbot users. This policy provides a default for Permissions > Levels in each service, however you can explicitly override the setting for each service if desired

URI

tmod:@turbot/aws-logs#/policy/types/logsPermissionsLevels

Category

Parent

AWS > Logs > Permissions

Targets

Default Template Input

[
  "{\n  item: account {\n    turbot{\n      id\n    }\n  }\n}\n",
  "{\n  availableLevels: policyValues(filter:\"policyTypeLevel:self resourceId:{{ $.item.turbot.id }} policyTypeId:'tmod:@turbot/aws-iam#/policy/types/permissionsLevelsDefault'\") {\n    items {\n      value\n    }\n  }\n}\n"
]

Default Template

"{% if $.availableLevels.items[0].value | length == 0 %} [] {% endif %}{% for item in $.availableLevels.items[0].value %}- {{ item }}\n{% endfor %}"

Schema

{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "Metadata",
      "ReadOnly",
      "Operator",
      "Admin",
      "Owner"
    ]
  }
}

AWS > Logs > Permissions > Levels > Modifiers

A map of AWS API to Turbot Permission Level used to customize Turbot's standard permissions. You can add, remove or redefine the mapping of AWS API operations to Turbot permissions levels here.

Note: Modifiers are cumulative - if you add a permission to the Metadata level, it is also added to ReadOnly, Operator and Admin. Modifier policies set here apply ONLY to the AWS level

example:
  - &quot;glacier:createvault&quot;: admin
  - &quot;glacier:ListVaults&quot;: metadata
  - &quot;s3:DeleteBucket&quot;: none

URI

tmod:@turbot/aws-logs#/policy/types/logsPermissionsLevelsModifiers

Category

AWS > Logs > Permissions > Levels

Parent

Targets

aws-iam#/definitions/awsModifierList

Schema

AWS > Logs > Permissions > Lockdown

URI

tmod:@turbot/aws-logs#/policy/types/logsPermissionsLockdown

Category

Parent

AWS > Logs > Permissions

Targets

AWS > Logs > Permissions > Lockdown > API Boundary

Configure whether the AWS logs API is enabled for all users and roles in turbot-managed boundary policies.

Note: Disabling the service disables the API for ALL users and roles, and Turbot will have no access to the API.

URI

tmod:@turbot/aws-logs#/policy/types/logsPermissionsLockdownApiBoundary

Category

AWS > Logs > Permissions > Lockdown

Parent

Targets

Valid Value

[
  "Enabled if AWS > Logs > API Enabled"
]

Schema

{
  "type": "string",
  "enum": [
    "Enabled if AWS > Logs > API Enabled"
  ],
  "example": [
    "Enabled if AWS > Logs > API Enabled"
  ],
  "default": "Enabled if AWS > Logs > API Enabled"
}

AWS > Logs > Regions

A list of AWS regions in which AWS Logs resources are supported for use.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

This policy is the default value for all AWS Logs resources' Regions policies.

URI

tmod:@turbot/aws-logs#/policy/types/logsRegionsDefault

Category

Parent

Targets

Default Template Input

"{\n  regions: policyValue(uri:\"tmod:@turbot/aws#/policy/types/regionsDefault\") {\n    value\n  }\n}\n"

Default Template

"{% if $.regions.value | length == 0 %} [] {% endif %}{% for item in $.regions.value %}- &#39;{{ item }}&#39;\n{% endfor %}"

Schema

AWS > Logs > Resource Policy > Active

Determine the action to take when an AWS Logs resource policy, based on the AWS > Logs > Resource Policy > Active > * policies.

The Active control checks the status of all defined Active policies for the resource (AWS > Logs > Resource Policy > Active > *), raises an alarm, and takes the defined enforcement action. Each Active sub-policy can calculate a status of active, inactive or skipped. Generally, if the resource appears to be Active for any reason it will be considered Active. Note the contrast with Approved, where if the resource appears to be Unapproved for any reason it will be considered Unapproved.

See Active for more information.

URI

tmod:@turbot/aws-logs#/policy/types/resourcePolicyActive

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Check: Active",
  "Enforce: Delete inactive with 1 day warning",
  "Enforce: Delete inactive with 3 days warning",
  "Enforce: Delete inactive with 7 days warning",
  "Enforce: Delete inactive with 14 days warning",
  "Enforce: Delete inactive with 30 days warning",
  "Enforce: Delete inactive with 60 days warning",
  "Enforce: Delete inactive with 90 days warning",
  "Enforce: Delete inactive with 180 days warning",
  "Enforce: Delete inactive with 365 days warning"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Active",
    "Enforce: Delete inactive with 1 day warning",
    "Enforce: Delete inactive with 3 days warning",
    "Enforce: Delete inactive with 7 days warning",
    "Enforce: Delete inactive with 14 days warning",
    "Enforce: Delete inactive with 30 days warning",
    "Enforce: Delete inactive with 60 days warning",
    "Enforce: Delete inactive with 90 days warning",
    "Enforce: Delete inactive with 180 days warning",
    "Enforce: Delete inactive with 365 days warning"
  ],
  "example": [
    "Check: Active"
  ],
  "default": "Skip"
}

AWS > Logs > Resource Policy > Active > Age

The age after which the AWS Logs resource policy is no longer considered active. If a create time is unavailable, the time Turbot discovered the resource is used.

See Active for more information.

URI

tmod:@turbot/aws-logs#/policy/types/resourcePolicyActiveAge

Category

AWS > Logs > Resource Policy > Active

Parent

Targets

Valid Value

[
  "Skip",
  "Force inactive if age > 1 day",
  "Force inactive if age > 3 days",
  "Force inactive if age > 7 days",
  "Force inactive if age > 14 days",
  "Force inactive if age > 30 days",
  "Force inactive if age > 60 days",
  "Force inactive if age > 90 days",
  "Force inactive if age > 180 days",
  "Force inactive if age > 365 days"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Force inactive if age > 1 day",
    "Force inactive if age > 3 days",
    "Force inactive if age > 7 days",
    "Force inactive if age > 14 days",
    "Force inactive if age > 30 days",
    "Force inactive if age > 60 days",
    "Force inactive if age > 90 days",
    "Force inactive if age > 180 days",
    "Force inactive if age > 365 days"
  ],
  "example": [
    "Force inactive if age > 90 days"
  ],
  "default": "Skip"
}

AWS > Logs > Resource Policy > Active > Budget

The impact of the budget state on the active control. This policy allows you to force resourcePolicys to inactive based on the current budget state, as reflected in AWS > Account > Budget > State

See Active for more information.

URI

tmod:@turbot/aws-logs#/policy/types/resourcePolicyActiveBudget

Category

AWS > Logs > Resource Policy > Active

Parent

Targets

Valid Value

[
  "Skip",
  "Force inactive if Budget > State is Over or higher",
  "Force inactive if Budget > State is Critical or higher",
  "Force inactive if Budget > State is Shutdown"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Force inactive if Budget > State is Over or higher",
    "Force inactive if Budget > State is Critical or higher",
    "Force inactive if Budget > State is Shutdown"
  ],
  "example": [
    "Skip"
  ],
  "default": "Skip"
}

AWS > Logs > Resource Policy > Active > Last Modified

The number of days since the AWS Logs resource policy was last modified before it is considered inactive.

See Active for more information.

URI

tmod:@turbot/aws-logs#/policy/types/resourcePolicyActiveLastModified

Category

AWS > Logs > Resource Policy > Active

Parent

Targets

Valid Value

[
  "Skip",
  "Active if last modified <= 1 day",
  "Active if last modified <= 3 days",
  "Active if last modified <= 7 days",
  "Active if last modified <= 14 days",
  "Active if last modified <= 30 days",
  "Active if last modified <= 60 days",
  "Active if last modified <= 90 days",
  "Active if last modified <= 180 days",
  "Active if last modified <= 365 days",
  "Force active if last modified <= 1 day",
  "Force active if last modified <= 3 days",
  "Force active if last modified <= 7 days",
  "Force active if last modified <= 14 days",
  "Force active if last modified <= 30 days",
  "Force active if last modified <= 60 days",
  "Force active if last modified <= 90 days",
  "Force active if last modified <= 180 days",
  "Force active if last modified <= 365 days"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Active if last modified <= 1 day",
    "Active if last modified <= 3 days",
    "Active if last modified <= 7 days",
    "Active if last modified <= 14 days",
    "Active if last modified <= 30 days",
    "Active if last modified <= 60 days",
    "Active if last modified <= 90 days",
    "Active if last modified <= 180 days",
    "Active if last modified <= 365 days",
    "Force active if last modified <= 1 day",
    "Force active if last modified <= 3 days",
    "Force active if last modified <= 7 days",
    "Force active if last modified <= 14 days",
    "Force active if last modified <= 30 days",
    "Force active if last modified <= 60 days",
    "Force active if last modified <= 90 days",
    "Force active if last modified <= 180 days",
    "Force active if last modified <= 365 days"
  ],
  "example": [
    "Active if last modified <= 90 days"
  ],
  "default": "Skip"
}

AWS > Logs > Resource Policy > Approved

Determine the action to take when an AWS Logs resource policy is not approved based on AWS > Logs > Resource Policy > Approved > * policies.

For any enforcement actions that specify if new, e.g., Enforce: Delete unapproved if new, this control will only take the enforcement actions for resources created within the last 60 minutes.

See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/resourcePolicyApproved

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Check: Approved",
  "Enforce: Delete unapproved if new"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Approved",
    "Enforce: Delete unapproved if new"
  ],
  "example": [
    "Check: Approved"
  ],
  "default": "Skip"
}

AWS > Logs > Resource Policy > Approved > Budget

The policy allows you to set resource policys to unapproved based on the current budget state, as reflected in AWS > Account > Budget > State

This policy will be evaluated by the Approved control. If an AWS Logs resource policy is not matched by the approved list, it will be subject to the action specified in the AWS > Logs > Resource Policy > Approved policy.

See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/resourcePolicyApprovedBudget

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Unapproved if Budget > State is Over or higher",
  "Unapproved if Budget > State is Critical or higher",
  "Unapproved if Budget > State is Shutdown"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Unapproved if Budget > State is Over or higher",
    "Unapproved if Budget > State is Critical or higher",
    "Unapproved if Budget > State is Shutdown"
  ],
  "example": [
    "Unapproved if Budget > State is Shutdown"
  ],
  "default": "Skip"
}

AWS > Logs > Resource Policy > Approved > Custom

Determine whether the AWS Logs resource policy is allowed to exist. This policy will be evaluated by the Approved control. If an AWS Logs resource policy is not approved, it will be subject to the action specified in the AWS > Logs > Resource Policy > Approved policy. See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/resourcePolicyApprovedCustom

Category

Parent

Targets

Schema

{
  "example": [
    "Approved",
    "Not approved",
    "Skip",
    {
      "result": "Approved"
    },
    {
      "title": "string",
      "result": "Not approved"
    },
    {
      "title": "string",
      "result": "Approved",
      "message": "string"
    },
    [
      {
        "title": "string",
        "result": "Approved",
        "message": "string"
      },
      {
        "title": "string",
        "result": "Not approved",
        "message": "string"
      }
    ]
  ],
  "anyOf": [
    {
      "type": "array",
      "items": {
        "type": "object",
        "properties": {
          "title": {
            "type": "string",
            "pattern": "^[\\W\\w]{1,32}$"
          },
          "message": {
            "type": "string",
            "pattern": "^[\\W\\w]{1,128}$"
          },
          "result": {
            "type": "string",
            "pattern": "^(Approved|Not approved|Skip)$"
          }
        },
        "required": [
          "result"
        ],
        "additionalProperties": false
      }
    },
    {
      "type": "object",
      "properties": {
        "title": {
          "type": "string",
          "pattern": "^[\\W\\w]{1,32}$"
        },
        "message": {
          "type": "string",
          "pattern": "^[\\W\\w]{1,128}$"
        },
        "result": {
          "type": "string",
          "pattern": "^(Approved|Not approved|Skip)$"
        }
      },
      "required": [
        "result"
      ],
      "additionalProperties": false
    },
    {
      "type": "string",
      "pattern": "^(Approved|Not approved|Skip)$"
    }
  ],
  "default": "Skip"
}

AWS > Logs > Resource Policy > Approved > Regions

A list of AWS regions in which AWS Logs resource policys are approved for use.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

This policy will be evaluated by the Approved control. If an AWS Logs resource policy is created in a region that is not in the approved list, it will be subject to the action specified in the AWS > Logs > Resource Policy > Approved policy.

See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/resourcePolicyApprovedRegions

Category

Parent

Targets

Default Template Input

"{\n  regions: policy(uri: \"tmod:@turbot/aws-logs#/policy/types/logsApprovedRegionsDefault\")\n}\n"

Default Template

"{% if $.regions | length == 0 %} [] {% endif %}{% for item in $.regions %}- &#39;{{ item }}&#39;\n{% endfor %}"

Schema

AWS > Logs > Resource Policy > Approved > Usage

Determine whether the AWS Logs resource policy is allowed to exist.

This policy will be evaluated by the Approved control. If an AWS Logs resource policy is not approved, it will be subject to the action specified in the AWS > Logs > Resource Policy > Approved policy.

See Approved for more information.

URI

tmod:@turbot/aws-logs#/policy/types/resourcePolicyApprovedUsage

Category

Parent

Targets

Valid Value

[
  "Not approved",
  "Approved",
  "Approved if AWS > Logs > Enabled"
]

Schema

{
  "type": "string",
  "enum": [
    "Not approved",
    "Approved",
    "Approved if AWS > Logs > Enabled"
  ],
  "example": [
    "Not approved"
  ],
  "default": "Approved if AWS > Logs > Enabled"
}

AWS > Logs > Resource Policy > CMDB

Configure whether to record and synchronize details for the AWS Logs resource policy into the CMDB.

If set to Skip then all changes to the CMDB are paused - no new resources will be discovered, no updates will be made and deleted resources will not be removed.

To cleanup resources and stop tracking changes, set this policy to "Enforce: Disabled".

CMDB controls also use the Regions policy associated with the resource. If region is not in AWS > Logs > Resource Policy > Regions policy, the CMDB control will delete the resource from the CMDB.

(Note: Setting CMDB to "Skip" will also pause these changes.)

URI

tmod:@turbot/aws-logs#/policy/types/resourcePolicyCmdb

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Enforce: Enabled",
  "Enforce: Disabled"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Enforce: Enabled",
    "Enforce: Disabled"
  ],
  "example": [
    "Skip"
  ],
  "default": "Enforce: Enabled"
}

AWS > Logs > Resource Policy > Regions

A list of AWS regions in which AWS Logs resource policys are supported for use.

Any resource policys in a region not listed here will not be recorded in CMDB.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

URI

tmod:@turbot/aws-logs#/policy/types/resourcePolicyRegions

Category

Parent

Targets

Schema

{
  "allOf": [
    {
      "$ref": "aws#/definitions/regionNameMatcherList"
    },
    {
      "default": [
        "af-south-1",
        "ap-east-1",
        "ap-northeast-1",
        "ap-northeast-2",
        "ap-south-1",
        "ap-southeast-1",
        "ap-southeast-2",
        "ca-central-1",
        "cn-north-1",
        "cn-northwest-1",
        "eu-central-1",
        "eu-north-1",
        "eu-south-1",
        "eu-west-1",
        "eu-west-2",
        "eu-west-3",
        "me-south-1",
        "sa-east-1",
        "us-east-1",
        "us-east-2",
        "us-gov-east-1",
        "us-gov-west-1",
        "us-west-1",
        "us-west-5"
      ]
    }
  ]
}

AWS > Logs > Resource Policy > Usage

Configure the number of AWS Logs resource policys that can be used for this region and the current consumption against the limit.

You can configure the behavior of the control with this AWS > Logs > Resource Policy > Usage policy.

URI

tmod:@turbot/aws-logs#/policy/types/resourcePolicyUsage

Category

Parent

Targets

Valid Value

[
  "Skip",
  "Check: Usage <= 85% of Limit",
  "Check: Usage <= 100% of Limit"
]

Schema

{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Usage <= 85% of Limit",
    "Check: Usage <= 100% of Limit"
  ],
  "example": [
    "Check: Usage <= 85% of Limit"
  ],
  "default": "Skip"
}

AWS > Logs > Resource Policy > Usage > Limit

Maximum number of items that can be created for this region.

URI

tmod:@turbot/aws-logs#/policy/types/resourcePolicyUsageLimit

Category

AWS > Logs > Resource Policy > Usage

Parent

Targets

Schema

{
  "type": "integer",
  "minimum": 0,
  "default": 10
}

AWS > Logs > Tags Template [Default]

A template used to generate the keys and values for AWS Logs resources.

By default, all Logs resource Tags > Template policies will use this value.

URI

tmod:@turbot/aws-logs#/policy/types/logsTagsTemplate

Category

Resource > Tags

Parent

Targets

aws#/definitions/tagsTemplateInput

Default Template Input

"{\n  defaultTags: policyValue(uri:\"tmod:@turbot/aws#/policy/types/defaultTagsTemplate\") {\n    value\n  }\n}\n"

Default Template

"{%- if $.defaultTags.value | length == 0 %} [] {%- elif $.defaultTags.value != undefined %}{{ $.defaultTags.value | dump | safe }}{%- else %}{% for item in $.defaultTags.value %}- {{ item }}{% endfor %}{% endif %}"

Schema

AWS > Turbot > Event Handlers > Events > Rules > Custom Event Patterns > @turbot/aws-logs

The CloudWatch Events event pattern used by the AWS Logs module to specify which events to forward to the Turbot Event Handlers.

URI

tmod:@turbot/aws-logs#/policy/types/logsCustomEventPatterns

Category

AWS > Turbot > Event Handlers > Events > Rules > Custom Event Patterns

Parent

Targets

Schema

{
  "type": "array",
  "items": {
    "type": "object"
  }
}

AWS > Turbot > Permissions > Compiled > API Boundary > @turbot/aws-logs

A read-only policy generated by Turbot that lists the APIs that should be added to the turbot-managed (hard) boundary policy, thereby enabling them to be assigned to users and roles. This value will change depending on the value of the value of the AWS > Logs > Permissions > Lockdown > API Boundary policy

URI

tmod:@turbot/aws-logs#/policy/types/awsCompiledApiBoundary

Category

AWS > Turbot > Permissions > Compiled > API Boundary

Parent

Targets

Schema

{
  "type": "array"
}

AWS > Turbot > Permissions > Compiled > Levels > @turbot/aws-logs

A calculated policy that Turbot uses to create a compiled list of ALL permissions for AWS Logs that is used as input to the stack that manages the Turbot IAM permissions objects.

URI

tmod:@turbot/aws-logs#/policy/types/awsLevelsCompiled

Category

AWS > Turbot > Permissions > Compiled > Levels

Parent

Targets

aws-iam#/definitions/awsLevelDefinitionList

Schema

AWS > Turbot > Permissions > Compiled > Service Permissions > @turbot/aws-logs

A calculated policy that Turbot uses to create a compiled list of ALL permissions for AWS Logs that is used as input to the control that manages the IAM stack.

URI

tmod:@turbot/aws-logs#/policy/types/awsCompiledServicePermissions

Category

AWS > Turbot > Permissions > Compiled > Service Permissions

Parent

Targets