Product logo
DocsBlogPricing

Policy types for @turbot/aws-kinesis

AWS > Kinesis > API Enabled

Configure whether the AWS Kinesis API is enabled.

Note: Disabling the service disables the API for ALL users and roles, and Guardrails will have no access to the API.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisApiEnabled
Category
Parent
Targets
Valid Value
[
  "Enabled",
  "Disabled",
  "Enabled if AWS > Kinesis > Enabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Enabled",
    "Disabled",
    "Enabled if AWS > Kinesis > Enabled"
  ],
  "default": "Enabled"
}

AWS > Kinesis > Approved Regions [Default]

A list of AWS regions in which AWS Kinesis resources are approved for use.

The expected format is an array of regions names. You may use the '*' and
'?' wildcard characters.

This policy is the default value for all AWS Kinesis resources' Approved > Regions policies.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisApprovedRegionsDefault
Category
Parent
Targets
Default Template Input
"{\n  regions: policyValue(uri:\"tmod:@turbot/aws#/policy/types/approvedRegionsDefault\") {\n    value\n  }\n}\n"
Default Template
"{% if $.regions.value | length == 0 %} [] {% endif %}{% for item in $.regions.value %}- '{{ item }}'\n{% endfor %}"
Schema

AWS > Kinesis > Consumer > Active

Determine the action to take when an AWS Kinesis consumer, based on the AWS > Kinesis > Consumer > Active > * policies.

The control determines whether the resource is in active use, and if not,
has the ability to delete / cleanup the resource. When running an automated
compliance environment, it's common to end up with a wide range of alarms
that are difficult and time consuming to clear. The Active control brings
automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the
resource (AWS > Kinesis > Consumer > Active > *), raises an alarm, and takes the defined enforcement
action. Each Active sub-policy can calculate a status of active, inactive
or skipped. Generally, if the resource appears to be Active for any reason
it will be considered Active.
Note the contrast with Approved, where if the resource appears to be Unapproved for any reason it will be considered
Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/consumerActive
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Check: Active",
  "Enforce: Delete inactive with 1 day warning",
  "Enforce: Delete inactive with 3 days warning",
  "Enforce: Delete inactive with 7 days warning",
  "Enforce: Delete inactive with 14 days warning",
  "Enforce: Delete inactive with 30 days warning",
  "Enforce: Delete inactive with 60 days warning",
  "Enforce: Delete inactive with 90 days warning",
  "Enforce: Delete inactive with 180 days warning",
  "Enforce: Delete inactive with 365 days warning"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Active",
    "Enforce: Delete inactive with 1 day warning",
    "Enforce: Delete inactive with 3 days warning",
    "Enforce: Delete inactive with 7 days warning",
    "Enforce: Delete inactive with 14 days warning",
    "Enforce: Delete inactive with 30 days warning",
    "Enforce: Delete inactive with 60 days warning",
    "Enforce: Delete inactive with 90 days warning",
    "Enforce: Delete inactive with 180 days warning",
    "Enforce: Delete inactive with 365 days warning"
  ],
  "example": [
    "Check: Active"
  ],
  "default": "Skip"
}

AWS > Kinesis > Consumer > Active > Age

The age after which the AWS Kinesis consumer
is no longer considered active. If a create time is unavailable, the time Guardrails discovered the resource is used.

The Active
control determines whether the resource is in active use, and if not, has
the ability to delete / cleanup the resource. When running an automated
compliance environment, it's common to end up with a wide range of alarms
that are difficult and time consuming to clear. The Active control brings
automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the
resource (AWS > Kinesis > Consumer > Active > *),
raises an alarm, and takes the defined enforcement action. Each Active
sub-policy can calculate a status of active, inactive or skipped. Generally,
if the resource appears to be Active for any reason it will be considered Active.
Note the contrast with Approved, where if the resource appears to be Unapproved
for any reason it will be considered Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/consumerActiveAge
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Force inactive if age > 1 day",
  "Force inactive if age > 3 days",
  "Force inactive if age > 7 days",
  "Force inactive if age > 14 days",
  "Force inactive if age > 30 days",
  "Force inactive if age > 60 days",
  "Force inactive if age > 90 days",
  "Force inactive if age > 180 days",
  "Force inactive if age > 365 days"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Force inactive if age > 1 day",
    "Force inactive if age > 3 days",
    "Force inactive if age > 7 days",
    "Force inactive if age > 14 days",
    "Force inactive if age > 30 days",
    "Force inactive if age > 60 days",
    "Force inactive if age > 90 days",
    "Force inactive if age > 180 days",
    "Force inactive if age > 365 days"
  ],
  "example": [
    "Force inactive if age > 90 days"
  ],
  "default": "Skip"
}

AWS > Kinesis > Consumer > Active > Budget

The impact of the budget state on the active control. This policy allows you to force
consumers to inactive based on the current budget state, as reflected in
AWS > Account > Budget > State

The Active control determines whether the resource is in active use, and if not, has
the ability to delete / cleanup the resource. When running an automated compliance
environment, it's common to end up with a wide range of alarms that are difficult
and time consuming to clear. The Active control brings automated, well-defined
control to this process.

The Active control checks the status of all defined Active policies for the
resource (AWS > Kinesis > Consumer > Active > *),
raises an alarm, and takes the defined enforcement action. Each Active
sub-policy can calculate a status of active, inactive or skipped. Generally,
if the resource appears to be Active for any reason it will be considered Active.
Note the contrast with Approved, where if the resource appears to be Unapproved
for any reason it will be considered Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/consumerActiveBudget
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Force inactive if Budget > State is Over or higher",
  "Force inactive if Budget > State is Critical or higher",
  "Force inactive if Budget > State is Shutdown"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Force inactive if Budget > State is Over or higher",
    "Force inactive if Budget > State is Critical or higher",
    "Force inactive if Budget > State is Shutdown"
  ],
  "example": [
    "Skip"
  ],
  "default": "Skip"
}

AWS > Kinesis > Consumer > Active > Last Modified

The number of days since the AWS Kinesis consumer
was last modified before it is considered inactive.

The Active
control determines whether the resource is in active use, and if not, has
the ability to delete / cleanup the resource. When running an automated
compliance environment, it's common to end up with a wide range of alarms
that are difficult and time consuming to clear. The Active control brings
automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the
resource (AWS > Kinesis > Consumer > Active > *),
raises an alarm, and takes the defined enforcement action. Each Active
sub-policy can calculate a status of active, inactive or skipped. Generally,
if the resource appears to be Active for any reason it will be considered Active.
Note the contrast with Approved, where if the resource appears to be Unapproved
for any reason it will be considered Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/consumerActiveLastModified
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Active if last modified <= 1 day",
  "Active if last modified <= 3 days",
  "Active if last modified <= 7 days",
  "Active if last modified <= 14 days",
  "Active if last modified <= 30 days",
  "Active if last modified <= 60 days",
  "Active if last modified <= 90 days",
  "Active if last modified <= 180 days",
  "Active if last modified <= 365 days",
  "Force active if last modified <= 1 day",
  "Force active if last modified <= 3 days",
  "Force active if last modified <= 7 days",
  "Force active if last modified <= 14 days",
  "Force active if last modified <= 30 days",
  "Force active if last modified <= 60 days",
  "Force active if last modified <= 90 days",
  "Force active if last modified <= 180 days",
  "Force active if last modified <= 365 days"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Active if last modified <= 1 day",
    "Active if last modified <= 3 days",
    "Active if last modified <= 7 days",
    "Active if last modified <= 14 days",
    "Active if last modified <= 30 days",
    "Active if last modified <= 60 days",
    "Active if last modified <= 90 days",
    "Active if last modified <= 180 days",
    "Active if last modified <= 365 days",
    "Force active if last modified <= 1 day",
    "Force active if last modified <= 3 days",
    "Force active if last modified <= 7 days",
    "Force active if last modified <= 14 days",
    "Force active if last modified <= 30 days",
    "Force active if last modified <= 60 days",
    "Force active if last modified <= 90 days",
    "Force active if last modified <= 180 days",
    "Force active if last modified <= 365 days"
  ],
  "example": [
    "Active if last modified <= 90 days"
  ],
  "default": "Skip"
}

AWS > Kinesis > Consumer > Approved

Determine the action to take when an AWS Kinesis consumer is not approved based on AWS > Kinesis > Consumer > Approved > * policies.

The Approved control checks the status of the defined Approved sub-policies for the resource. If the resource is not approved according to any of these policies, this control raises an alarm and takes the defined enforcement action.

For any enforcement actions that specify if new, e.g., Enforce: Delete unapproved if new, this control will only take the enforcement actions for resources created within the last 60 minutes.

See Approved for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/consumerApproved
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Check: Approved",
  "Enforce: Delete unapproved if new"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Approved",
    "Enforce: Delete unapproved if new"
  ],
  "example": [
    "Check: Approved"
  ],
  "default": "Skip"
}

AWS > Kinesis > Consumer > Approved > Budget

The policy allows you to set consumers to unapproved based on the current budget state, as reflected in AWS > Account > Budget > State

This policy will be evaluated by the Approved control. If an AWS Kinesis consumer is not matched by the approved list, it will be subject to the action specified in the AWS > Kinesis > Consumer > Approved policy.

See Approved for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/consumerApprovedBudget
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Unapproved if Budget > State is Over or higher",
  "Unapproved if Budget > State is Critical or higher",
  "Unapproved if Budget > State is Shutdown"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Unapproved if Budget > State is Over or higher",
    "Unapproved if Budget > State is Critical or higher",
    "Unapproved if Budget > State is Shutdown"
  ],
  "example": [
    "Unapproved if Budget > State is Shutdown"
  ],
  "default": "Skip"
}

AWS > Kinesis > Consumer > Approved > Custom

Determine whether the AWS Kinesis consumer is allowed to exist.
This policy will be evaluated by the Approved control. If an AWS Kinesis consumer is not approved, it will be subject to the action specified in the AWS > Kinesis > Consumer > Approved policy.
See Approved for more information.

Note: The policy value must be a string with a value of Approved, Not approved or Skip, or in the form of YAML objects. The object(s) must contain the key result with its value as Approved or Not approved. A custom title and message can also be added using the keys title and message respectively.

URI
tmod:@turbot/aws-kinesis#/policy/types/consumerApprovedCustom
Category
Parent
Targets
Schema
{
  "example": [
    "Approved",
    "Not approved",
    "Skip",
    {
      "result": "Approved"
    },
    {
      "title": "string",
      "result": "Not approved"
    },
    {
      "title": "string",
      "result": "Approved",
      "message": "string"
    },
    [
      {
        "title": "string",
        "result": "Approved",
        "message": "string"
      },
      {
        "title": "string",
        "result": "Not approved",
        "message": "string"
      }
    ]
  ],
  "anyOf": [
    {
      "type": "array",
      "items": {
        "type": "object",
        "properties": {
          "title": {
            "type": "string",
            "pattern": "^[\\W\\w]{1,32}$"
          },
          "message": {
            "type": "string",
            "pattern": "^[\\W\\w]{1,128}$"
          },
          "result": {
            "type": "string",
            "pattern": "^(Approved|Not approved|Skip)$"
          }
        },
        "required": [
          "result"
        ],
        "additionalProperties": false
      }
    },
    {
      "type": "object",
      "properties": {
        "title": {
          "type": "string",
          "pattern": "^[\\W\\w]{1,32}$"
        },
        "message": {
          "type": "string",
          "pattern": "^[\\W\\w]{1,128}$"
        },
        "result": {
          "type": "string",
          "pattern": "^(Approved|Not approved|Skip)$"
        }
      },
      "required": [
        "result"
      ],
      "additionalProperties": false
    },
    {
      "type": "string",
      "pattern": "^(Approved|Not approved|Skip)$"
    }
  ],
  "default": "Skip"
}

AWS > Kinesis > Consumer > Approved > Regions

A list of AWS regions in which AWS Kinesis consumers are approved for use.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

This policy will be evaluated by the Approved control. If an AWS Kinesis consumer is created in a region that is not in the approved list, it will be subject to the action specified in the AWS > Kinesis > Consumer > Approved policy.

See Approved for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/consumerApprovedRegions
Category
Parent
Targets
Default Template Input
"{\n  regions: policy(uri: \"tmod:@turbot/aws-kinesis#/policy/types/kinesisApprovedRegionsDefault\")\n}\n"
Default Template
"{% if $.regions | length == 0 %} [] {% endif %}{% for item in $.regions %}- &#39;{{ item }}&#39;&#92;n{% endfor %}"
Schema

AWS > Kinesis > Consumer > Approved > Usage

Determine whether the AWS Kinesis consumer is allowed to exist.

This policy will be evaluated by the Approved control. If an AWS Kinesis consumer is not approved, it will be subject to the action specified in the AWS > Kinesis > Consumer > Approved policy.

See Approved for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/consumerApprovedUsage
Category
Parent
Targets
Valid Value
[
  "Not approved",
  "Approved",
  "Approved if AWS > Kinesis > Enabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Not approved",
    "Approved",
    "Approved if AWS > Kinesis > Enabled"
  ],
  "example": [
    "Not approved"
  ],
  "default": "Approved if AWS > Kinesis > Enabled"
}

AWS > Kinesis > Consumer > CMDB

Configure whether to record and synchronize details for the AWS Kinesis consumer into the CMDB.

The CMDB control is responsible for populating and updating all the attributes for that resource type in the Guardrails CMDB.
All policies and controls in Guardrails are based around the resource, so usually the CMDB policy is set to "Enforce: Enabled".

If set to Skip then all changes to the CMDB are paused - no new resources will be discovered, no updates will be made and deleted resources will not be removed.

To cleanup resources and stop tracking changes, set this policy to "Enforce: Disabled".

CMDB controls also use the Regions policy associated with the resource. If region is not in AWS > Kinesis > Consumer > Regions policy, the CMDB control will delete the resource from the CMDB.

(Note: Setting CMDB to "Skip" will also pause these changes.)

URI
tmod:@turbot/aws-kinesis#/policy/types/consumerCmdb
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Enforce: Enabled",
  "Enforce: Disabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Enforce: Enabled",
    "Enforce: Disabled"
  ],
  "example": [
    "Skip"
  ],
  "default": "Enforce: Enabled"
}

AWS > Kinesis > Consumer > Regions

A list of AWS regions in which AWS Kinesis consumers are supported for use.

Any consumers in a region not listed here will not be recorded in CMDB.

The expected format is an array of regions names. You may use the '*' and
'?' wildcard characters.

URI
tmod:@turbot/aws-kinesis#/policy/types/consumerRegions
Category
Parent
Targets
Default Template Input
"{\n  regions: policyValue(uri:\"tmod:@turbot/aws-kinesis#/policy/types/kinesisRegionsDefault\") {\n    value\n  }\n}\n"
Default Template
"{% if $.regions.value | length == 0 %} [] {% endif %}{% for item in $.regions.value %}- &#39;{{ item }}&#39;&#92;n{% endfor %}"
Schema

AWS > Kinesis > Consumer > Usage

Configure the number of AWS Kinesis consumers that can be used for this region and the current consumption against the limit.

You can configure the behavior of the control with this AWS > Kinesis > Consumer > Usage policy.

URI
tmod:@turbot/aws-kinesis#/policy/types/consumerUsage
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Check: Usage <= 85% of Limit",
  "Check: Usage <= 100% of Limit"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Usage <= 85% of Limit",
    "Check: Usage <= 100% of Limit"
  ],
  "example": [
    "Check: Usage <= 85% of Limit"
  ],
  "default": "Skip"
}

AWS > Kinesis > Consumer > Usage > Limit

Maximum number of items that can be created for this region.

URI
tmod:@turbot/aws-kinesis#/policy/types/consumerUsageLimit
Category
Parent
Targets
Schema
{
  "type": "integer",
  "minimum": 0,
  "default": 2500
}

AWS > Kinesis > Enabled

Configure whether the AWS Kinesis service is enabled.
This will only affect Guardrails managed User Roles and will allow the Guardrails managed user to access AWS Kinesis service.
- Enabled policy allows Guardrails managed users to perform all the actions for the service
- Enabled: Metadata Only policy allows Guardrails managed users to perform only the metadata level actions for the service (like describe*, list*)

Note:
- Disabled policy disables the service but does NOT disable the API for Guardrails or SuperUsers
- All the resource data stored in the Guardrails CMDB is considered to be metadata
- For more information related to permissions and grant levels, please check the documentation

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisEnabled
Category
Parent
Targets
Valid Value
[
  "Enabled",
  "Enabled: Metadata Only",
  "Disabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Enabled",
    "Enabled: Metadata Only",
    "Disabled"
  ],
  "example": [
    "Enabled"
  ],
  "default": "Disabled"
}

AWS > Kinesis > Kinesis Video Stream > Active

Determine the action to take when an AWS Kinesis kinesis video stream, based on the AWS > Kinesis > Kinesis Video Stream > Active > * policies.

The control determines whether the resource is in active use, and if not,
has the ability to delete / cleanup the resource. When running an automated
compliance environment, it's common to end up with a wide range of alarms
that are difficult and time consuming to clear. The Active control brings
automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the
resource (AWS > Kinesis > Kinesis Video Stream > Active > *), raises an alarm, and takes the defined enforcement
action. Each Active sub-policy can calculate a status of active, inactive
or skipped. Generally, if the resource appears to be Active for any reason
it will be considered Active.
Note the contrast with Approved, where if the resource appears to be Unapproved for any reason it will be considered
Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisVideoStreamActive
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Check: Active",
  "Enforce: Delete inactive with 1 day warning",
  "Enforce: Delete inactive with 3 days warning",
  "Enforce: Delete inactive with 7 days warning",
  "Enforce: Delete inactive with 14 days warning",
  "Enforce: Delete inactive with 30 days warning",
  "Enforce: Delete inactive with 60 days warning",
  "Enforce: Delete inactive with 90 days warning",
  "Enforce: Delete inactive with 180 days warning",
  "Enforce: Delete inactive with 365 days warning"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Active",
    "Enforce: Delete inactive with 1 day warning",
    "Enforce: Delete inactive with 3 days warning",
    "Enforce: Delete inactive with 7 days warning",
    "Enforce: Delete inactive with 14 days warning",
    "Enforce: Delete inactive with 30 days warning",
    "Enforce: Delete inactive with 60 days warning",
    "Enforce: Delete inactive with 90 days warning",
    "Enforce: Delete inactive with 180 days warning",
    "Enforce: Delete inactive with 365 days warning"
  ],
  "example": [
    "Check: Active"
  ],
  "default": "Skip"
}

AWS > Kinesis > Kinesis Video Stream > Active > Age

The age after which the AWS Kinesis kinesis video stream
is no longer considered active. If a create time is unavailable, the time Guardrails discovered the resource is used.

The Active
control determines whether the resource is in active use, and if not, has
the ability to delete / cleanup the resource. When running an automated
compliance environment, it's common to end up with a wide range of alarms
that are difficult and time consuming to clear. The Active control brings
automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the
resource (AWS > Kinesis > Kinesis Video Stream > Active > *),
raises an alarm, and takes the defined enforcement action. Each Active
sub-policy can calculate a status of active, inactive or skipped. Generally,
if the resource appears to be Active for any reason it will be considered Active.
Note the contrast with Approved, where if the resource appears to be Unapproved
for any reason it will be considered Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisVideoStreamActiveAge
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Force inactive if age > 1 day",
  "Force inactive if age > 3 days",
  "Force inactive if age > 7 days",
  "Force inactive if age > 14 days",
  "Force inactive if age > 30 days",
  "Force inactive if age > 60 days",
  "Force inactive if age > 90 days",
  "Force inactive if age > 180 days",
  "Force inactive if age > 365 days"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Force inactive if age > 1 day",
    "Force inactive if age > 3 days",
    "Force inactive if age > 7 days",
    "Force inactive if age > 14 days",
    "Force inactive if age > 30 days",
    "Force inactive if age > 60 days",
    "Force inactive if age > 90 days",
    "Force inactive if age > 180 days",
    "Force inactive if age > 365 days"
  ],
  "example": [
    "Force inactive if age > 90 days"
  ],
  "default": "Skip"
}

AWS > Kinesis > Kinesis Video Stream > Active > Budget

The impact of the budget state on the active control. This policy allows you to force
kinesisVideoStreams to inactive based on the current budget state, as reflected in
AWS > Account > Budget > State

The Active control determines whether the resource is in active use, and if not, has
the ability to delete / cleanup the resource. When running an automated compliance
environment, it's common to end up with a wide range of alarms that are difficult
and time consuming to clear. The Active control brings automated, well-defined
control to this process.

The Active control checks the status of all defined Active policies for the
resource (AWS > Kinesis > Kinesis Video Stream > Active > *),
raises an alarm, and takes the defined enforcement action. Each Active
sub-policy can calculate a status of active, inactive or skipped. Generally,
if the resource appears to be Active for any reason it will be considered Active.
Note the contrast with Approved, where if the resource appears to be Unapproved
for any reason it will be considered Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisVideoStreamActiveBudget
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Force inactive if Budget > State is Over or higher",
  "Force inactive if Budget > State is Critical or higher",
  "Force inactive if Budget > State is Shutdown"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Force inactive if Budget > State is Over or higher",
    "Force inactive if Budget > State is Critical or higher",
    "Force inactive if Budget > State is Shutdown"
  ],
  "example": [
    "Skip"
  ],
  "default": "Skip"
}

AWS > Kinesis > Kinesis Video Stream > Active > Last Modified

The number of days since the AWS Kinesis kinesis video stream
was last modified before it is considered inactive.

The Active
control determines whether the resource is in active use, and if not, has
the ability to delete / cleanup the resource. When running an automated
compliance environment, it's common to end up with a wide range of alarms
that are difficult and time consuming to clear. The Active control brings
automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the
resource (AWS > Kinesis > Kinesis Video Stream > Active > *),
raises an alarm, and takes the defined enforcement action. Each Active
sub-policy can calculate a status of active, inactive or skipped. Generally,
if the resource appears to be Active for any reason it will be considered Active.
Note the contrast with Approved, where if the resource appears to be Unapproved
for any reason it will be considered Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisVideoStreamActiveLastModified
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Active if last modified <= 1 day",
  "Active if last modified <= 3 days",
  "Active if last modified <= 7 days",
  "Active if last modified <= 14 days",
  "Active if last modified <= 30 days",
  "Active if last modified <= 60 days",
  "Active if last modified <= 90 days",
  "Active if last modified <= 180 days",
  "Active if last modified <= 365 days",
  "Force active if last modified <= 1 day",
  "Force active if last modified <= 3 days",
  "Force active if last modified <= 7 days",
  "Force active if last modified <= 14 days",
  "Force active if last modified <= 30 days",
  "Force active if last modified <= 60 days",
  "Force active if last modified <= 90 days",
  "Force active if last modified <= 180 days",
  "Force active if last modified <= 365 days"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Active if last modified <= 1 day",
    "Active if last modified <= 3 days",
    "Active if last modified <= 7 days",
    "Active if last modified <= 14 days",
    "Active if last modified <= 30 days",
    "Active if last modified <= 60 days",
    "Active if last modified <= 90 days",
    "Active if last modified <= 180 days",
    "Active if last modified <= 365 days",
    "Force active if last modified <= 1 day",
    "Force active if last modified <= 3 days",
    "Force active if last modified <= 7 days",
    "Force active if last modified <= 14 days",
    "Force active if last modified <= 30 days",
    "Force active if last modified <= 60 days",
    "Force active if last modified <= 90 days",
    "Force active if last modified <= 180 days",
    "Force active if last modified <= 365 days"
  ],
  "example": [
    "Active if last modified <= 90 days"
  ],
  "default": "Skip"
}

AWS > Kinesis > Kinesis Video Stream > Approved

Determine the action to take when an AWS Kinesis kinesis video stream is not approved based on AWS > Kinesis > Kinesis Video Stream > Approved > * policies.

The Approved control checks the status of the defined Approved sub-policies for the resource. If the resource is not approved according to any of these policies, this control raises an alarm and takes the defined enforcement action.

For any enforcement actions that specify if new, e.g., Enforce: Delete unapproved if new, this control will only take the enforcement actions for resources created within the last 60 minutes.

See Approved for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisVideoStreamApproved
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Check: Approved",
  "Enforce: Delete unapproved if new"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Approved",
    "Enforce: Delete unapproved if new"
  ],
  "example": [
    "Check: Approved"
  ],
  "default": "Skip"
}

AWS > Kinesis > Kinesis Video Stream > Approved > Budget

The policy allows you to set kinesis video streams to unapproved based on the current budget state, as reflected in AWS > Account > Budget > State

This policy will be evaluated by the Approved control. If an AWS Kinesis kinesis video stream is not matched by the approved list, it will be subject to the action specified in the AWS > Kinesis > Kinesis Video Stream > Approved policy.

See Approved for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisVideoStreamApprovedBudget
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Unapproved if Budget > State is Over or higher",
  "Unapproved if Budget > State is Critical or higher",
  "Unapproved if Budget > State is Shutdown"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Unapproved if Budget > State is Over or higher",
    "Unapproved if Budget > State is Critical or higher",
    "Unapproved if Budget > State is Shutdown"
  ],
  "example": [
    "Unapproved if Budget > State is Shutdown"
  ],
  "default": "Skip"
}

AWS > Kinesis > Kinesis Video Stream > Approved > Custom

Determine whether the AWS Kinesis kinesis video stream is allowed to exist.
This policy will be evaluated by the Approved control. If an AWS Kinesis kinesis video stream is not approved, it will be subject to the action specified in the AWS > Kinesis > Kinesis Video Stream > Approved policy.
See Approved for more information.

Note: The policy value must be a string with a value of Approved, Not approved or Skip, or in the form of YAML objects. The object(s) must contain the key result with its value as Approved or Not approved. A custom title and message can also be added using the keys title and message respectively.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisVideoStreamApprovedCustom
Category
Parent
Targets
Schema
{
  "example": [
    "Approved",
    "Not approved",
    "Skip",
    {
      "result": "Approved"
    },
    {
      "title": "string",
      "result": "Not approved"
    },
    {
      "title": "string",
      "result": "Approved",
      "message": "string"
    },
    [
      {
        "title": "string",
        "result": "Approved",
        "message": "string"
      },
      {
        "title": "string",
        "result": "Not approved",
        "message": "string"
      }
    ]
  ],
  "anyOf": [
    {
      "type": "array",
      "items": {
        "type": "object",
        "properties": {
          "title": {
            "type": "string",
            "pattern": "^[\\W\\w]{1,32}$"
          },
          "message": {
            "type": "string",
            "pattern": "^[\\W\\w]{1,128}$"
          },
          "result": {
            "type": "string",
            "pattern": "^(Approved|Not approved|Skip)$"
          }
        },
        "required": [
          "result"
        ],
        "additionalProperties": false
      }
    },
    {
      "type": "object",
      "properties": {
        "title": {
          "type": "string",
          "pattern": "^[\\W\\w]{1,32}$"
        },
        "message": {
          "type": "string",
          "pattern": "^[\\W\\w]{1,128}$"
        },
        "result": {
          "type": "string",
          "pattern": "^(Approved|Not approved|Skip)$"
        }
      },
      "required": [
        "result"
      ],
      "additionalProperties": false
    },
    {
      "type": "string",
      "pattern": "^(Approved|Not approved|Skip)$"
    }
  ],
  "default": "Skip"
}

AWS > Kinesis > Kinesis Video Stream > Approved > Regions

A list of AWS regions in which AWS Kinesis kinesis video streams are approved for use.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

This policy will be evaluated by the Approved control. If an AWS Kinesis kinesis video stream is created in a region that is not in the approved list, it will be subject to the action specified in the AWS > Kinesis > Kinesis Video Stream > Approved policy.

See Approved for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisVideoStreamApprovedRegions
Category
Parent
Targets
Default Template Input
"{\n  regions: policy(uri: \"tmod:@turbot/aws-kinesis#/policy/types/kinesisApprovedRegionsDefault\")\n}\n"
Default Template
"{% if $.regions | length == 0 %} [] {% endif %}{% for item in $.regions %}- &#39;{{ item }}&#39;&#92;n{% endfor %}"
Schema

AWS > Kinesis > Kinesis Video Stream > Approved > Usage

Determine whether the AWS Kinesis kinesis video stream is allowed to exist.

This policy will be evaluated by the Approved control. If an AWS Kinesis kinesis video stream is not approved, it will be subject to the action specified in the AWS > Kinesis > Kinesis Video Stream > Approved policy.

See Approved for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisVideoStreamApprovedUsage
Category
Parent
Targets
Valid Value
[
  "Not approved",
  "Approved",
  "Approved if AWS > Kinesis > Enabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Not approved",
    "Approved",
    "Approved if AWS > Kinesis > Enabled"
  ],
  "example": [
    "Not approved"
  ],
  "default": "Approved if AWS > Kinesis > Enabled"
}

AWS > Kinesis > Kinesis Video Stream > CMDB

Configure whether to record and synchronize details for the AWS Kinesis kinesis video stream into the CMDB.

The CMDB control is responsible for populating and updating all the attributes for that resource type in the Guardrails CMDB.
All policies and controls in Guardrails are based around the resource, so usually the CMDB policy is set to "Enforce: Enabled".

If set to Skip then all changes to the CMDB are paused - no new resources will be discovered, no updates will be made and deleted resources will not be removed.

To cleanup resources and stop tracking changes, set this policy to "Enforce: Disabled".

CMDB controls also use the Regions policy associated with the resource. If region is not in AWS > Kinesis > Kinesis Video Stream > Regions policy, the CMDB control will delete the resource from the CMDB.

(Note: Setting CMDB to "Skip" will also pause these changes.)

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisVideoStreamCmdb
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Enforce: Enabled",
  "Enforce: Disabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Enforce: Enabled",
    "Enforce: Disabled"
  ],
  "example": [
    "Skip"
  ],
  "default": "Enforce: Enabled"
}

AWS > Kinesis > Kinesis Video Stream > Regions

A list of AWS regions in which AWS Kinesis kinesis video streams are supported for use.

Any kinesis video streams in a region not listed here will not be recorded in CMDB.

The expected format is an array of regions names. You may use the '*' and
'?' wildcard characters.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisVideoStreamRegions
Category
Parent
Targets
Schema
{
  "allOf": [
    {
      "$ref": "aws#/definitions/regionNameMatcherList"
    },
    {
      "default": [
        "af-south-1",
        "ap-east-1",
        "ap-northeast-1",
        "ap-northeast-2",
        "ap-south-1",
        "ap-southeast-1",
        "ap-southeast-2",
        "ca-central-1",
        "eu-central-1",
        "eu-west-1",
        "eu-west-2",
        "eu-west-3",
        "sa-east-1",
        "us-east-1",
        "us-east-2",
        "us-west-2"
      ]
    }
  ]
}

AWS > Kinesis > Kinesis Video Stream > Tags

Determine the action to take when an AWS Kinesis kinesis video stream tags are not updated based on the AWS > Kinesis > Kinesis Video Stream > Tags > * policies.

The control ensure AWS Kinesis kinesis video stream tags include tags defined in AWS > Kinesis > Kinesis Video Stream > Tags > Template.

Tags not defined in Kinesis Video Stream Tags Template will not be modified or deleted. Setting a tag value to undefined will result in the tag being deleted.

See Tags for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisVideoStreamTags
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Check: Tags are correct",
  "Enforce: Set tags"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Tags are correct",
    "Enforce: Set tags"
  ],
  "example": [
    "Check: Tags are correct"
  ],
  "default": "Skip"
}

AWS > Kinesis > Kinesis Video Stream > Tags > Template

The template is used to generate the keys and values for AWS Kinesis kinesis video stream.

Tags not defined in Kinesis Video Stream Tags Template will not be modified or deleted. Setting a tag value to undefined will result in the tag being deleted.

See Tags for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisVideoStreamTagsTemplate
Category
Parent
Targets
Default Template Input
[
  "{\n  account {\n    turbot {\n      id\n    }\n  }\n}\n",
  "{\n  defaultTags: policyValue(uri:\"tmod:@turbot/aws-kinesis#/policy/types/kinesisTagsTemplate\" resourceId: \"{{ $.account.turbot.id }}\") {\n    value\n  }\n}\n"
]
Default Template
"{%- if $.defaultTags.value | length == 0 %} [] {%- elif $.defaultTags.value != undefined %}{{ $.defaultTags.value | dump | safe }}{%- else %}{% for item in $.defaultTags.value %}- {{ item }}{% endfor %}{% endif %}"
Schema

AWS > Kinesis > Permissions

Configure whether permissions policies are in effect for AWS Kinesis.

This setting does not affect account level permissions (AWS/Admin, AWS/Owner, etc)

Note: The behavior of this policy depends on the value of AWS > Permissions.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisPermissions
Category
Parent
Targets
Valid Value
[
  "Enabled",
  "Disabled",
  "Enabled if AWS > Kinesis > Enabled & AWS > Kinesis > API Enabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Enabled",
    "Disabled",
    "Enabled if AWS > Kinesis > Enabled & AWS > Kinesis > API Enabled"
  ],
  "example": [
    "Enabled"
  ],
  "default": "Enabled if AWS > Kinesis > Enabled & AWS > Kinesis > API Enabled"
}

AWS > Kinesis > Permissions > Levels

Define the permissions levels that can be used to grant access to an AWS account.
Permissions levels defined will appear in the UI to assign access to Guardrails users.
This policy provides a default for Permissions > Levels in each service,
however you can explicitly override the setting for each service if desired

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisPermissionsLevels
Category
Parent
Targets
Default Template Input
[
  "{\n  item: account {\n    turbot{\n      id\n    }\n  }\n}\n",
  "{\n  availableLevels: policyValues(filter:\"policyTypeLevel:self resourceId:{{ $.item.turbot.id }} policyTypeId:'tmod:@turbot/aws-iam#/policy/types/permissionsLevelsDefault'\") {\n    items {\n      value\n    }\n  }\n}\n"
]
Default Template
"{% if $.availableLevels.items[0].value | length == 0 %} [] {% endif %}{% for item in $.availableLevels.items[0].value %}- {{ item }}&#92;n{% endfor %}"
Schema
{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "Metadata",
      "ReadOnly",
      "Operator",
      "Admin",
      "Owner"
    ]
  }
}

AWS > Kinesis > Permissions > Levels > Modifiers

A map of AWS API to Guardrails Permission Level used to customize Guardrails' standard permissions.
You can add, remove or redefine the mapping of AWS API operations to Guardrails permissions levels here.

Note: Modifiers are cumulative - if you add a permission to the Metadata level, it is also added to ReadOnly, Operator and Admin.
Modifier policies set here apply ONLY to the AWS level

<br />example:<br /> - &quot;glacier:createvault&quot;: admin<br /> - &quot;glacier:ListVaults&quot;: metadata<br /> - &quot;s3:DeleteBucket&quot;: none<br />

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisPermissionsLevelsModifiers
Category
Parent
Targets
Schema

AWS > Kinesis > Permissions > Lockdown

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisPermissionsLockdown
Category
Parent
Targets

AWS > Kinesis > Permissions > Lockdown > API Boundary

Configure whether the AWS kinesis API is enabled for all users and roles in guardrails-managed boundary policies.

Note: Disabling the service disables the API for ALL users and roles, and Guardrails will have no access to the API.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisPermissionsLockdownApiBoundary
Category
Parent
Targets
Valid Value
[
  "Enabled if AWS > Kinesis > API Enabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Enabled if AWS > Kinesis > API Enabled"
  ],
  "example": [
    "Enabled if AWS > Kinesis > API Enabled"
  ],
  "default": "Enabled if AWS > Kinesis > API Enabled"
}

AWS > Kinesis > Regions

A list of AWS regions in which AWS Kinesis resources are supported for use.

The expected format is an array of regions names. You may use the '*' and
'?' wildcard characters.

This policy is the default value for all AWS Kinesis resources' Regions policies.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisRegionsDefault
Category
Parent
Targets
Schema
{
  "allOf": [
    {
      "$ref": "aws#/definitions/regionNameMatcherList"
    },
    {
      "default": [
        "af-south-1",
        "ap-east-1",
        "ap-northeast-1",
        "ap-northeast-2",
        "ap-northeast-3",
        "ap-south-1",
        "ap-southeast-1",
        "ap-southeast-2",
        "ca-central-1",
        "cn-north-1",
        "cn-northwest-1",
        "eu-central-1",
        "eu-north-1",
        "eu-south-1",
        "eu-west-1",
        "eu-west-2",
        "eu-west-3",
        "me-south-1",
        "sa-east-1",
        "us-east-1",
        "us-east-2",
        "us-gov-east-1",
        "us-gov-west-1",
        "us-west-1",
        "us-west-2"
      ]
    }
  ]
}

AWS > Kinesis > Stream > Active

Determine the action to take when an AWS Kinesis stream, based on the AWS > Kinesis > Stream > Active > * policies.

The control determines whether the resource is in active use, and if not,
has the ability to delete / cleanup the resource. When running an automated
compliance environment, it's common to end up with a wide range of alarms
that are difficult and time consuming to clear. The Active control brings
automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the
resource (AWS > Kinesis > Stream > Active > *), raises an alarm, and takes the defined enforcement
action. Each Active sub-policy can calculate a status of active, inactive
or skipped. Generally, if the resource appears to be Active for any reason
it will be considered Active.
Note the contrast with Approved, where if the resource appears to be Unapproved for any reason it will be considered
Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/streamActive
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Check: Active",
  "Enforce: Delete inactive with 1 day warning",
  "Enforce: Delete inactive with 3 days warning",
  "Enforce: Delete inactive with 7 days warning",
  "Enforce: Delete inactive with 14 days warning",
  "Enforce: Delete inactive with 30 days warning",
  "Enforce: Delete inactive with 60 days warning",
  "Enforce: Delete inactive with 90 days warning",
  "Enforce: Delete inactive with 180 days warning",
  "Enforce: Delete inactive with 365 days warning"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Active",
    "Enforce: Delete inactive with 1 day warning",
    "Enforce: Delete inactive with 3 days warning",
    "Enforce: Delete inactive with 7 days warning",
    "Enforce: Delete inactive with 14 days warning",
    "Enforce: Delete inactive with 30 days warning",
    "Enforce: Delete inactive with 60 days warning",
    "Enforce: Delete inactive with 90 days warning",
    "Enforce: Delete inactive with 180 days warning",
    "Enforce: Delete inactive with 365 days warning"
  ],
  "example": [
    "Check: Active"
  ],
  "default": "Skip"
}

AWS > Kinesis > Stream > Active > Age

The age after which the AWS Kinesis stream
is no longer considered active. If a create time is unavailable, the time Guardrails discovered the resource is used.

The Active
control determines whether the resource is in active use, and if not, has
the ability to delete / cleanup the resource. When running an automated
compliance environment, it's common to end up with a wide range of alarms
that are difficult and time consuming to clear. The Active control brings
automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the
resource (AWS > Kinesis > Stream > Active > *),
raises an alarm, and takes the defined enforcement action. Each Active
sub-policy can calculate a status of active, inactive or skipped. Generally,
if the resource appears to be Active for any reason it will be considered Active.
Note the contrast with Approved, where if the resource appears to be Unapproved
for any reason it will be considered Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/streamActiveAge
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Force inactive if age > 1 day",
  "Force inactive if age > 3 days",
  "Force inactive if age > 7 days",
  "Force inactive if age > 14 days",
  "Force inactive if age > 30 days",
  "Force inactive if age > 60 days",
  "Force inactive if age > 90 days",
  "Force inactive if age > 180 days",
  "Force inactive if age > 365 days"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Force inactive if age > 1 day",
    "Force inactive if age > 3 days",
    "Force inactive if age > 7 days",
    "Force inactive if age > 14 days",
    "Force inactive if age > 30 days",
    "Force inactive if age > 60 days",
    "Force inactive if age > 90 days",
    "Force inactive if age > 180 days",
    "Force inactive if age > 365 days"
  ],
  "example": [
    "Force inactive if age > 90 days"
  ],
  "default": "Skip"
}

AWS > Kinesis > Stream > Active > Budget

The impact of the budget state on the active control. This policy allows you to force
streams to inactive based on the current budget state, as reflected in
AWS > Account > Budget > State

The Active control determines whether the resource is in active use, and if not, has
the ability to delete / cleanup the resource. When running an automated compliance
environment, it's common to end up with a wide range of alarms that are difficult
and time consuming to clear. The Active control brings automated, well-defined
control to this process.

The Active control checks the status of all defined Active policies for the
resource (AWS > Kinesis > Stream > Active > *),
raises an alarm, and takes the defined enforcement action. Each Active
sub-policy can calculate a status of active, inactive or skipped. Generally,
if the resource appears to be Active for any reason it will be considered Active.
Note the contrast with Approved, where if the resource appears to be Unapproved
for any reason it will be considered Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/streamActiveBudget
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Force inactive if Budget > State is Over or higher",
  "Force inactive if Budget > State is Critical or higher",
  "Force inactive if Budget > State is Shutdown"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Force inactive if Budget > State is Over or higher",
    "Force inactive if Budget > State is Critical or higher",
    "Force inactive if Budget > State is Shutdown"
  ],
  "example": [
    "Skip"
  ],
  "default": "Skip"
}

AWS > Kinesis > Stream > Active > Last Modified

The number of days since the AWS Kinesis stream
was last modified before it is considered inactive.

The Active
control determines whether the resource is in active use, and if not, has
the ability to delete / cleanup the resource. When running an automated
compliance environment, it's common to end up with a wide range of alarms
that are difficult and time consuming to clear. The Active control brings
automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the
resource (AWS > Kinesis > Stream > Active > *),
raises an alarm, and takes the defined enforcement action. Each Active
sub-policy can calculate a status of active, inactive or skipped. Generally,
if the resource appears to be Active for any reason it will be considered Active.
Note the contrast with Approved, where if the resource appears to be Unapproved
for any reason it will be considered Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/streamActiveLastModified
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Active if last modified <= 1 day",
  "Active if last modified <= 3 days",
  "Active if last modified <= 7 days",
  "Active if last modified <= 14 days",
  "Active if last modified <= 30 days",
  "Active if last modified <= 60 days",
  "Active if last modified <= 90 days",
  "Active if last modified <= 180 days",
  "Active if last modified <= 365 days",
  "Force active if last modified <= 1 day",
  "Force active if last modified <= 3 days",
  "Force active if last modified <= 7 days",
  "Force active if last modified <= 14 days",
  "Force active if last modified <= 30 days",
  "Force active if last modified <= 60 days",
  "Force active if last modified <= 90 days",
  "Force active if last modified <= 180 days",
  "Force active if last modified <= 365 days"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Active if last modified <= 1 day",
    "Active if last modified <= 3 days",
    "Active if last modified <= 7 days",
    "Active if last modified <= 14 days",
    "Active if last modified <= 30 days",
    "Active if last modified <= 60 days",
    "Active if last modified <= 90 days",
    "Active if last modified <= 180 days",
    "Active if last modified <= 365 days",
    "Force active if last modified <= 1 day",
    "Force active if last modified <= 3 days",
    "Force active if last modified <= 7 days",
    "Force active if last modified <= 14 days",
    "Force active if last modified <= 30 days",
    "Force active if last modified <= 60 days",
    "Force active if last modified <= 90 days",
    "Force active if last modified <= 180 days",
    "Force active if last modified <= 365 days"
  ],
  "example": [
    "Active if last modified <= 90 days"
  ],
  "default": "Skip"
}

AWS > Kinesis > Stream > Approved

Determine the action to take when an AWS Kinesis stream is not approved based on AWS > Kinesis > Stream > Approved > * policies.

The Approved control checks the status of the defined Approved sub-policies for the resource. If the resource is not approved according to any of these policies, this control raises an alarm and takes the defined enforcement action.

For any enforcement actions that specify if new, e.g., Enforce: Delete unapproved if new, this control will only take the enforcement actions for resources created within the last 60 minutes.

See Approved for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/streamApproved
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Check: Approved",
  "Enforce: Delete unapproved if new"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Approved",
    "Enforce: Delete unapproved if new"
  ],
  "example": [
    "Check: Approved"
  ],
  "default": "Skip"
}

AWS > Kinesis > Stream > Approved > Budget

The policy allows you to set streams to unapproved based on the current budget state, as reflected in AWS > Account > Budget > State

This policy will be evaluated by the Approved control. If an AWS Kinesis stream is not matched by the approved list, it will be subject to the action specified in the AWS > Kinesis > Stream > Approved policy.

See Approved for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/streamApprovedBudget
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Unapproved if Budget > State is Over or higher",
  "Unapproved if Budget > State is Critical or higher",
  "Unapproved if Budget > State is Shutdown"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Unapproved if Budget > State is Over or higher",
    "Unapproved if Budget > State is Critical or higher",
    "Unapproved if Budget > State is Shutdown"
  ],
  "example": [
    "Unapproved if Budget > State is Shutdown"
  ],
  "default": "Skip"
}

AWS > Kinesis > Stream > Approved > Custom

Determine whether the AWS Kinesis stream is allowed to exist.
This policy will be evaluated by the Approved control. If an AWS Kinesis stream is not approved, it will be subject to the action specified in the AWS > Kinesis > Stream > Approved policy.
See Approved for more information.

Note: The policy value must be a string with a value of Approved, Not approved or Skip, or in the form of YAML objects. The object(s) must contain the key result with its value as Approved or Not approved. A custom title and message can also be added using the keys title and message respectively.

URI
tmod:@turbot/aws-kinesis#/policy/types/streamApprovedCustom
Category
Parent
Targets
Schema
{
  "example": [
    "Approved",
    "Not approved",
    "Skip",
    {
      "result": "Approved"
    },
    {
      "title": "string",
      "result": "Not approved"
    },
    {
      "title": "string",
      "result": "Approved",
      "message": "string"
    },
    [
      {
        "title": "string",
        "result": "Approved",
        "message": "string"
      },
      {
        "title": "string",
        "result": "Not approved",
        "message": "string"
      }
    ]
  ],
  "anyOf": [
    {
      "type": "array",
      "items": {
        "type": "object",
        "properties": {
          "title": {
            "type": "string",
            "pattern": "^[\\W\\w]{1,32}$"
          },
          "message": {
            "type": "string",
            "pattern": "^[\\W\\w]{1,128}$"
          },
          "result": {
            "type": "string",
            "pattern": "^(Approved|Not approved|Skip)$"
          }
        },
        "required": [
          "result"
        ],
        "additionalProperties": false
      }
    },
    {
      "type": "object",
      "properties": {
        "title": {
          "type": "string",
          "pattern": "^[\\W\\w]{1,32}$"
        },
        "message": {
          "type": "string",
          "pattern": "^[\\W\\w]{1,128}$"
        },
        "result": {
          "type": "string",
          "pattern": "^(Approved|Not approved|Skip)$"
        }
      },
      "required": [
        "result"
      ],
      "additionalProperties": false
    },
    {
      "type": "string",
      "pattern": "^(Approved|Not approved|Skip)$"
    }
  ],
  "default": "Skip"
}

AWS > Kinesis > Stream > Approved > Regions

A list of AWS regions in which AWS Kinesis streams are approved for use.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

This policy will be evaluated by the Approved control. If an AWS Kinesis stream is created in a region that is not in the approved list, it will be subject to the action specified in the AWS > Kinesis > Stream > Approved policy.

See Approved for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/streamApprovedRegions
Category
Parent
Targets
Default Template Input
"{\n  regions: policy(uri: \"tmod:@turbot/aws-kinesis#/policy/types/kinesisApprovedRegionsDefault\")\n}\n"
Default Template
"{% if $.regions | length == 0 %} [] {% endif %}{% for item in $.regions %}- &#39;{{ item }}&#39;&#92;n{% endfor %}"
Schema

AWS > Kinesis > Stream > Approved > Usage

Determine whether the AWS Kinesis stream is allowed to exist.

This policy will be evaluated by the Approved control. If an AWS Kinesis stream is not approved, it will be subject to the action specified in the AWS > Kinesis > Stream > Approved policy.

See Approved for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/streamApprovedUsage
Category
Parent
Targets
Valid Value
[
  "Not approved",
  "Approved",
  "Approved if AWS > Kinesis > Enabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Not approved",
    "Approved",
    "Approved if AWS > Kinesis > Enabled"
  ],
  "example": [
    "Not approved"
  ],
  "default": "Approved if AWS > Kinesis > Enabled"
}

AWS > Kinesis > Stream > CMDB

Configure whether to record and synchronize details for the AWS Kinesis stream into the CMDB.

The CMDB control is responsible for populating and updating all the attributes for that resource type in the Guardrails CMDB.
All policies and controls in Guardrails are based around the resource, so usually the CMDB policy is set to "Enforce: Enabled".

If set to Skip then all changes to the CMDB are paused - no new resources will be discovered, no updates will be made and deleted resources will not be removed.

To cleanup resources and stop tracking changes, set this policy to "Enforce: Disabled".

CMDB controls also use the Regions policy associated with the resource. If region is not in AWS > Kinesis > Stream > Regions policy, the CMDB control will delete the resource from the CMDB.

(Note: Setting CMDB to "Skip" will also pause these changes.)

URI
tmod:@turbot/aws-kinesis#/policy/types/streamCmdb
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Enforce: Enabled",
  "Enforce: Disabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Enforce: Enabled",
    "Enforce: Disabled"
  ],
  "example": [
    "Skip"
  ],
  "default": "Enforce: Enabled"
}

AWS > Kinesis > Stream > Encryption at Rest

Define the Encryption at Rest settings required for AWS > Kinesis > Stream.

Encryption at Rest refers specifically to the encryption of data when written
to an underlying storage system. This control determines whether the resource
is encrypted at rest, and sets encryption to your desired level.

The Encryption at Rest
control compares the encryption settings against the encryption policies for the resource
(AWS > Kinesis > Stream > Encryption at Rest > *),
raises an alarm, and takes the defined enforcement action

URI
tmod:@turbot/aws-kinesis#/policy/types/streamEncryptionAtRest
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Check: None",
  "Check: None or higher",
  "Check: AWS managed key",
  "Check: AWS managed key or higher",
  "Check: Customer managed key",
  "Check: Encryption at Rest > Customer Managed Key",
  "Enforce: None",
  "Enforce: AWS managed key",
  "Enforce: AWS managed key or higher",
  "Enforce: Customer managed key",
  "Enforce: Encryption at Rest > Customer Managed Key"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Check: None",
    "Check: None or higher",
    "Check: AWS managed key",
    "Check: AWS managed key or higher",
    "Check: Customer managed key",
    "Check: Encryption at Rest > Customer Managed Key",
    "Enforce: None",
    "Enforce: AWS managed key",
    "Enforce: AWS managed key or higher",
    "Enforce: Customer managed key",
    "Enforce: Encryption at Rest > Customer Managed Key"
  ],
  "example": [
    "Check: None or higher"
  ],
  "default": "Skip"
}

AWS > Kinesis > Stream > Encryption at Rest > Customer Managed Key

Define the KMS key ID for encryption at rest.

Encryption at Rest refers specifically to the encryption of data when written
to an underlying storage system. This control determines whether the resource
is encrypted at rest, and sets encryption to your desired level.

The Encryption at Rest
control compares the encryption settings against the encryption policies for the resource
(AWS > Kinesis > Stream > Encryption at Rest > *),
raises an alarm, and takes the defined enforcement action

Please make sure the key defined in the template has required permissions.

<br />example:<br /> alias/aws/ebs<br /> ddc06e04-ce5f-4995-c758-c2b6c510e8fd<br /> arn:aws:kms:us-east-1:123456789012:key/ddc06e04-ce5f-4995-c758-c2b6c510e8fd<br /> arn:aws:kms:us-east-1:123456789012:alias/aws/ebs<br />

URI
tmod:@turbot/aws-kinesis#/policy/types/streamEncryptionAtRestCustomerManagedKey
Category
Parent
Targets
Default Template Input
"{\n  defaultKey: policy(uri: \"aws-kms#/policy/types/keyDefaultCustomerManagedKey\")\n}\n"
Default Template
"{{ $.defaultKey }}"
Schema
{
  "anyOf": [
    {
      "type": "string",
      "pattern": "^alias/[a-zA-Z0-9:/_-]{1,249}$"
    },
    {
      "type": "string",
      "pattern": "^[-a-z0-9-]{1,255}$"
    },
    {
      "type": "string",
      "pattern": "^arn:aws(-us-gov|-cn)?:kms:[a-z]{2}(-gov)?-[a-z]+-[0-9]:[0-9]{12}:key/[-a-z0-9-]{1,255}$"
    },
    {
      "type": "string",
      "pattern": "^arn:aws(-us-gov|-cn)?:kms:[a-z]{2}(-gov)?-[a-z]+-[0-9]:[0-9]{12}:alias/[a-zA-Z0-9:/_-]{1,249}$"
    }
  ],
  "tests": [
    {
      "description": "valid - if keyArn",
      "input": "arn:aws:kms:us-east-1:039305405804:key/ddc06e04-ce5f-4995-b758-c2b6c510e8fd"
    },
    {
      "description": "valid - if aliasName",
      "input": "alias/aws/ebs"
    },
    {
      "description": "valid - if keyId",
      "input": "ddc06e04-ce5f-4995-b758-c2b6c510e8fd"
    },
    {
      "description": "valid - if aliasArn",
      "input": "arn:aws:kms:us-east-1:039305405804:alias/aws/ebs"
    }
  ]
}

AWS > Kinesis > Stream > Regions

A list of AWS regions in which AWS Kinesis streams are supported for use.

Any streams in a region not listed here will not be recorded in CMDB.

The expected format is an array of regions names. You may use the '*' and
'?' wildcard characters.

URI
tmod:@turbot/aws-kinesis#/policy/types/streamRegions
Category
Parent
Targets
Default Template Input
"{\n  regions: policyValue(uri:\"tmod:@turbot/aws-kinesis#/policy/types/kinesisRegionsDefault\") {\n    value\n  }\n}\n"
Default Template
"{% if $.regions.value | length == 0 %} [] {% endif %}{% for item in $.regions.value %}- &#39;{{ item }}&#39;&#92;n{% endfor %}"
Schema

AWS > Kinesis > Stream > Tags

Determine the action to take when an AWS Kinesis stream tags are not updated based on the AWS > Kinesis > Stream > Tags > * policies.

The control ensure AWS Kinesis stream tags include tags defined in AWS > Kinesis > Stream > Tags > Template.

Tags not defined in Stream Tags Template will not be modified or deleted. Setting a tag value to undefined will result in the tag being deleted.

See Tags for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/streamTags
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Check: Tags are correct",
  "Enforce: Set tags"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Tags are correct",
    "Enforce: Set tags"
  ],
  "example": [
    "Check: Tags are correct"
  ],
  "default": "Skip"
}

AWS > Kinesis > Stream > Tags > Template

The template is used to generate the keys and values for AWS Kinesis stream.

Tags not defined in Stream Tags Template will not be modified or deleted. Setting a tag value to undefined will result in the tag being deleted.

See Tags for more information.

URI
tmod:@turbot/aws-kinesis#/policy/types/streamTagsTemplate
Category
Parent
Targets
Default Template Input
[
  "{\n  account {\n    turbot {\n      id\n    }\n  }\n}\n",
  "{\n  defaultTags: policyValue(uri:\"tmod:@turbot/aws-kinesis#/policy/types/kinesisTagsTemplate\" resourceId: \"{{ $.account.turbot.id }}\") {\n    value\n  }\n}\n"
]
Default Template
"{%- if $.defaultTags.value | length == 0 %} [] {%- elif $.defaultTags.value != undefined %}{{ $.defaultTags.value | dump | safe }}{%- else %}{% for item in $.defaultTags.value %}- {{ item }}{% endfor %}{% endif %}"
Schema

AWS > Kinesis > Stream > Usage

Configure the number of AWS Kinesis streams that can be used for this region and the current consumption against the limit.

You can configure the behavior of the control with this AWS > Kinesis > Stream > Usage policy.

URI
tmod:@turbot/aws-kinesis#/policy/types/streamUsage
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Check: Usage <= 85% of Limit",
  "Check: Usage <= 100% of Limit"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Usage <= 85% of Limit",
    "Check: Usage <= 100% of Limit"
  ],
  "example": [
    "Check: Usage <= 85% of Limit"
  ],
  "default": "Skip"
}

AWS > Kinesis > Stream > Usage > Limit

Maximum number of items that can be created for this region.

URI
tmod:@turbot/aws-kinesis#/policy/types/streamUsageLimit
Category
Parent
Targets
Schema
{
  "type": "integer",
  "minimum": 0,
  "default": 50
}

AWS > Kinesis > Tags Template [Default]

A template used to generate the keys and values for AWS Kinesis resources.

By default, all Kinesis resource Tags > Template policies will use this value.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisTagsTemplate
Category
Parent
Targets
Default Template Input
"{\n  defaultTags: policyValue(uri:\"tmod:@turbot/aws#/policy/types/defaultTagsTemplate\") {\n    value\n  }\n}\n"
Default Template
"{%- if $.defaultTags.value | length == 0 %} [] {%- elif $.defaultTags.value != undefined %}{{ $.defaultTags.value | dump | safe }}{%- else %}{% for item in $.defaultTags.value %}- {{ item }}{% endfor %}{% endif %}"
Schema

AWS > Turbot > Event Handlers > Events > Rules > Event Sources > @turbot/aws-kinesis

AWS Kinesis CloudWatch Events event sources for the Guardrails Event Handlers.

URI
tmod:@turbot/aws-kinesis#/policy/types/kinesisEventSources
Category
Parent
Targets
Schema
{
  "type": "array",
  "items": {
    "type": "string"
  },
  "default": [
    "aws.kinesis",
    "aws.kinesisvideo"
  ]
}

AWS > Turbot > Permissions > Compiled > API Boundary > @turbot/aws-kinesis

A read-only policy generated by Guardrails that lists the APIs that
should be added to the guardrails-managed (hard) boundary policy,
thereby enabling them to be assigned to users and roles.
This value will change depending on the value of the value of the
AWS > Kinesis > Permissions > Lockdown > API Boundary policy

URI
tmod:@turbot/aws-kinesis#/policy/types/awsCompiledApiBoundary
Category
Parent
Targets
Schema
{
  "type": "array"
}

AWS > Turbot > Permissions > Compiled > Levels > @turbot/aws-kinesis

A calculated policy that Guardrails uses to create a compiled list of ALL permissions for AWS Kinesis
that is used as input to the stack that manages the Guardrails IAM permissions objects.

URI
tmod:@turbot/aws-kinesis#/policy/types/awsLevelsCompiled
Category
Parent
Targets
Schema

AWS > Turbot > Permissions > Compiled > Service Permissions > @turbot/aws-kinesis

A calculated policy that Guardrails uses to create a compiled list of ALL permissions for AWS Kinesis
that is used as input to the control that manages the IAM stack.

URI
tmod:@turbot/aws-kinesis#/policy/types/awsCompiledServicePermissions
Category
Parent
Targets
Schema