Product logo
DocsBlogPricing

Policy types for @turbot/aws-codepipeline

AWS > CodePipeline > API Enabled

Configure whether the AWS CodePipeline API is enabled. Note: Disabling the service disables the API for ALL users and roles, and Turbot will have no access to the API.

URI
tmod:@turbot/aws-codepipeline#/policy/types/codePipelineApiEnabled
Category
Parent
Targets
Valid Value
[
  "Enabled",
  "Disabled",
  "Enabled if AWS > CodePipeline > Enabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Enabled",
    "Disabled",
    "Enabled if AWS > CodePipeline > Enabled"
  ],
  "default": "Enabled"
}

AWS > CodePipeline > Approved Regions [Default]

A list of AWS regions in which AWS CodePipeline resources are approved for use.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

This policy is the default value for all AWS CodePipeline resources' Approved > Regions policies.

URI
tmod:@turbot/aws-codepipeline#/policy/types/codePipelineApprovedRegionsDefault
Category
Parent
Targets
Schema

AWS > CodePipeline > Enabled

Enabled CodePipeline.

URI
tmod:@turbot/aws-codepipeline#/policy/types/codePipelineEnabled
Category
Parent
Targets
Valid Value
[
  "Enabled",
  "Enabled: Metadata Only",
  "Disabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Enabled",
    "Enabled: Metadata Only",
    "Disabled"
  ],
  "example": [
    "Enabled"
  ],
  "default": "Disabled"
}

AWS > CodePipeline > Permissions

Configure whether permissions policies are in effect for AWS CodePipeline.

This setting does not affect account level permissions (AWS/Admin, AWS/Owner, etc)

Note: The behavior of this policy depends on the value of AWS > Permissions.

URI
tmod:@turbot/aws-codepipeline#/policy/types/codePipelinePermissions
Category
Parent
Targets
Valid Value
[
  "Enabled",
  "Disabled",
  "Enabled if AWS > CodePipeline > Enabled & AWS > CodePipeline > API Enabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Enabled",
    "Disabled",
    "Enabled if AWS > CodePipeline > Enabled & AWS > CodePipeline > API Enabled"
  ],
  "example": [
    "Enabled"
  ],
  "default": "Enabled if AWS > CodePipeline > Enabled & AWS > CodePipeline > API Enabled"
}

AWS > CodePipeline > Permissions > Levels

Define the permissions levels that can be used to grant access to an AWS account. Permissions levels defined will appear in the UI to assign access to Turbot users. This policy provides a default for Permissions > Levels in each service, however you can explicitly override the setting for each service if desired

URI
tmod:@turbot/aws-codepipeline#/policy/types/codePipelinePermissionsLevels
Category
Parent
Targets
Schema
{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "Metadata",
      "ReadOnly",
      "Operator",
      "Admin",
      "Owner"
    ]
  }
}

AWS > CodePipeline > Permissions > Levels > Modifiers

A map of AWS API to Turbot Permission Level used to customize Turbot's standard permissions. You can add, remove or redefine the mapping of AWS API operations to Turbot permissions levels here.

Note: Modifiers are cumulative - if you add a permission to the Metadata level, it is also added to ReadOnly, Operator and Admin. Modifier policies set here apply ONLY to the AWS level

example:
  - "glacier:createvault": admin
  - "glacier:ListVaults": metadata
  - "s3:DeleteBucket": none
URI
tmod:@turbot/aws-codepipeline#/policy/types/codePipelinePermissionsLevelsModifiers
Category
Parent
Targets
Schema

AWS > CodePipeline > Permissions > Lockdown

URI
tmod:@turbot/aws-codepipeline#/policy/types/codePipelinePermissionsLockdown
Category
Parent
Targets

AWS > CodePipeline > Permissions > Lockdown > API Boundary

Configure whether the AWS codePipeline API is enabled for all users and roles in turbot-managed boundary policies.

Note: Disabling the service disables the API for ALL users and roles, and Turbot will have no access to the API.

URI
tmod:@turbot/aws-codepipeline#/policy/types/codePipelinePermissionsLockdownApiBoundary
Category
Parent
Targets
Valid Value
[
  "Enabled if AWS > CodePipeline > API Enabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Enabled if AWS > CodePipeline > API Enabled"
  ],
  "example": [
    "Enabled if AWS > CodePipeline > API Enabled"
  ],
  "default": "Enabled if AWS > CodePipeline > API Enabled"
}

AWS > CodePipeline > Regions

A list of AWS regions in which AWS CodePipeline resources are supported for use.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

This policy is the default value for all AWS CodePipeline resources' Regions policies.

URI
tmod:@turbot/aws-codepipeline#/policy/types/codePipelineRegionsDefault
Category
Parent
Targets
Schema
{
  "allOf": [
    {
      "$ref": "aws#/definitions/regionNameMatcherList"
    },
    {
      "default": [
        "ap-northeast-1",
        "ap-northeast-2",
        "ap-south-1",
        "ap-southeast-1",
        "ap-southeast-2",
        "ca-central-1",
        "eu-central-1",
        "eu-north-1",
        "eu-west-1",
        "eu-west-2",
        "eu-west-3",
        "sa-east-1",
        "us-east-1",
        "us-east-2",
        "us-gov-west-1",
        "us-west-1",
        "us-west-2"
      ]
    }
  ]
}

AWS > CodePipeline > Tags Template [Default]

A template used to generate the keys and values for AWS CodePipeline resources.

By default, all CodePipeline resource Tags > Template policies will use this value.

URI
tmod:@turbot/aws-codepipeline#/policy/types/codePipelineTagsTemplate
Category
Parent
Targets
Schema

AWS > Turbot > Event Handlers > Events > Rules > Event Sources > @turbot/aws-codepipeline

AWS CodePipeline CloudWatch Events event sources for the Turbot Event Handlers.

URI
tmod:@turbot/aws-codepipeline#/policy/types/codePipelineEventSources
Category
Parent
Targets
Schema
{
  "type": "array",
  "items": {
    "type": "string"
  },
  "default": [
    "aws.codepipeline"
  ]
}

AWS > Turbot > Permissions > Compiled > API Boundary > @turbot/aws-codepipeline

A read-only policy generated by Turbot that lists the APIs that should be added to the turbot-managed (hard) boundary policy, thereby enabling them to be assigned to users and roles. This value will change depending on the value of the value of the AWS > CodePipeline > Permissions > Lockdown > API Boundary policy

URI
tmod:@turbot/aws-codepipeline#/policy/types/awsCompiledApiBoundary
Category
Parent
Targets
Schema
{
  "type": "array"
}

AWS > Turbot > Permissions > Compiled > Levels > @turbot/aws-codepipeline

A calculated policy that Turbot uses to create a compiled list of ALL permissions for AWS CodePipeline that is used as input to the stack that manages the Turbot IAM permissions objects.

URI
tmod:@turbot/aws-codepipeline#/policy/types/awsLevelsCompiled
Category
Parent
Targets
Schema

AWS > Turbot > Permissions > Compiled > Service Permissions > @turbot/aws-codepipeline

A calculated policy that Turbot uses to create a compiled list of ALL permissions for AWS CodePipeline that is used as input to the control that manages the IAM stack.

URI
tmod:@turbot/aws-codepipeline#/policy/types/awsCompiledServicePermissions
Category
Parent
Targets
Schema