Product logo
DocsBlogPricing

Policy types for @turbot/aws-appmesh

AWS > App Mesh > API Enabled

Configure whether the AWS App Mesh API is enabled.

Note: Disabling the service disables the API for ALL users and roles, and Turbot will have no access to the API.

URI
tmod:@turbot/aws-appmesh#/policy/types/appMeshApiEnabled
Category
Parent
Targets
Valid Value
[
  "Enabled",
  "Disabled",
  "Enabled if AWS > App Mesh > Enabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Enabled",
    "Disabled",
    "Enabled if AWS > App Mesh > Enabled"
  ],
  "default": "Enabled"
}

AWS > App Mesh > Approved Regions [Default]

A list of AWS regions in which AWS App Mesh resources are approved for use.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

This policy is the default value for all AWS App Mesh resources' Approved > Regions policies.

URI
tmod:@turbot/aws-appmesh#/policy/types/appMeshApprovedRegionsDefault
Category
Parent
Targets
Default Template Input
"{\n  regions: policyValue(uri:\"tmod:@turbot/aws#/policy/types/approvedRegionsDefault\") {\n    value\n  }\n}\n"
Default Template
"{% if $.regions.value | length == 0 %} [] {% endif %}{% for item in $.regions.value %}- '{{ item }}'\n{% endfor %}"
Schema

AWS > App Mesh > Enabled

Configure whether the AWS App Mesh service is enabled. This will only affect Turbot managed User Roles and will allow the Turbot managed user to access AWS App Mesh service.

  • Enabled policy allows Turbot managed users to perform all the actions for the service
  • Enabled: Metadata Only policy allows Turbot managed users to perform only the metadata level actions for the service (like describe*, list*)

Note:

  • Disabled policy disables the service but does NOT disable the API for Turbot or SuperUsers
  • All the resource data stored in the Turbot CMDB is considered to be metadata
  • For more information related to permissions and grant levels, please check the documentation
URI
tmod:@turbot/aws-appmesh#/policy/types/appMeshEnabled
Category
Parent
Targets
Valid Value
[
  "Enabled",
  "Enabled: Metadata Only",
  "Disabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Enabled",
    "Enabled: Metadata Only",
    "Disabled"
  ],
  "example": [
    "Enabled"
  ],
  "default": "Disabled"
}

AWS > App Mesh > Mesh > Active

Determine the action to take when an AWS App Mesh mesh, based on the AWS > App Mesh > Mesh > Active > * policies.

The control determines whether the resource is in active use, and if not, has the ability to delete / cleanup the resource. When running an automated compliance environment, it's common to end up with a wide range of alarms that are difficult and time consuming to clear. The Active control brings automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the resource (AWS > App Mesh > Mesh > Active > *), raises an alarm, and takes the defined enforcement action. Each Active sub-policy can calculate a status of active, inactive or skipped. Generally, if the resource appears to be Active for any reason it will be considered Active. Note the contrast with Approved, where if the resource appears to be Unapproved for any reason it will be considered Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-appmesh#/policy/types/meshActive
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Check: Active",
  "Enforce: Delete inactive with 1 day warning",
  "Enforce: Delete inactive with 3 days warning",
  "Enforce: Delete inactive with 7 days warning",
  "Enforce: Delete inactive with 14 days warning",
  "Enforce: Delete inactive with 30 days warning",
  "Enforce: Delete inactive with 60 days warning",
  "Enforce: Delete inactive with 90 days warning",
  "Enforce: Delete inactive with 180 days warning",
  "Enforce: Delete inactive with 365 days warning"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Active",
    "Enforce: Delete inactive with 1 day warning",
    "Enforce: Delete inactive with 3 days warning",
    "Enforce: Delete inactive with 7 days warning",
    "Enforce: Delete inactive with 14 days warning",
    "Enforce: Delete inactive with 30 days warning",
    "Enforce: Delete inactive with 60 days warning",
    "Enforce: Delete inactive with 90 days warning",
    "Enforce: Delete inactive with 180 days warning",
    "Enforce: Delete inactive with 365 days warning"
  ],
  "example": [
    "Check: Active"
  ],
  "default": "Skip"
}

AWS > App Mesh > Mesh > Active > Age

The age after which the AWS App Mesh mesh is no longer considered active. If a create time is unavailable, the time Turbot discovered the resource is used.

The Active control determines whether the resource is in active use, and if not, has the ability to delete / cleanup the resource. When running an automated compliance environment, it's common to end up with a wide range of alarms that are difficult and time consuming to clear. The Active control brings automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the resource (AWS > App Mesh > Mesh > Active > *), raises an alarm, and takes the defined enforcement action. Each Active sub-policy can calculate a status of active, inactive or skipped. Generally, if the resource appears to be Active for any reason it will be considered Active. Note the contrast with Approved, where if the resource appears to be Unapproved for any reason it will be considered Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-appmesh#/policy/types/meshActiveAge
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Force inactive if age > 1 day",
  "Force inactive if age > 3 days",
  "Force inactive if age > 7 days",
  "Force inactive if age > 14 days",
  "Force inactive if age > 30 days",
  "Force inactive if age > 60 days",
  "Force inactive if age > 90 days",
  "Force inactive if age > 180 days",
  "Force inactive if age > 365 days"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Force inactive if age > 1 day",
    "Force inactive if age > 3 days",
    "Force inactive if age > 7 days",
    "Force inactive if age > 14 days",
    "Force inactive if age > 30 days",
    "Force inactive if age > 60 days",
    "Force inactive if age > 90 days",
    "Force inactive if age > 180 days",
    "Force inactive if age > 365 days"
  ],
  "example": [
    "Force inactive if age > 90 days"
  ],
  "default": "Skip"
}

AWS > App Mesh > Mesh > Active > Last Modified

The number of days since the AWS App Mesh mesh was last modified before it is considered inactive.

The Active control determines whether the resource is in active use, and if not, has the ability to delete / cleanup the resource. When running an automated compliance environment, it's common to end up with a wide range of alarms that are difficult and time consuming to clear. The Active control brings automated, well-defined control to this process.

The Active control checks the status of all defined Active policies for the resource (AWS > App Mesh > Mesh > Active > *), raises an alarm, and takes the defined enforcement action. Each Active sub-policy can calculate a status of active, inactive or skipped. Generally, if the resource appears to be Active for any reason it will be considered Active. Note the contrast with Approved, where if the resource appears to be Unapproved for any reason it will be considered Unapproved.

See Active for more information.

URI
tmod:@turbot/aws-appmesh#/policy/types/meshActiveLastModified
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Active if last modified <= 1 day",
  "Active if last modified <= 3 days",
  "Active if last modified <= 7 days",
  "Active if last modified <= 14 days",
  "Active if last modified <= 30 days",
  "Active if last modified <= 60 days",
  "Active if last modified <= 90 days",
  "Active if last modified <= 180 days",
  "Active if last modified <= 365 days",
  "Force active if last modified <= 1 day",
  "Force active if last modified <= 3 days",
  "Force active if last modified <= 7 days",
  "Force active if last modified <= 14 days",
  "Force active if last modified <= 30 days",
  "Force active if last modified <= 60 days",
  "Force active if last modified <= 90 days",
  "Force active if last modified <= 180 days",
  "Force active if last modified <= 365 days"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Active if last modified <= 1 day",
    "Active if last modified <= 3 days",
    "Active if last modified <= 7 days",
    "Active if last modified <= 14 days",
    "Active if last modified <= 30 days",
    "Active if last modified <= 60 days",
    "Active if last modified <= 90 days",
    "Active if last modified <= 180 days",
    "Active if last modified <= 365 days",
    "Force active if last modified <= 1 day",
    "Force active if last modified <= 3 days",
    "Force active if last modified <= 7 days",
    "Force active if last modified <= 14 days",
    "Force active if last modified <= 30 days",
    "Force active if last modified <= 60 days",
    "Force active if last modified <= 90 days",
    "Force active if last modified <= 180 days",
    "Force active if last modified <= 365 days"
  ],
  "example": [
    "Active if last modified <= 90 days"
  ],
  "default": "Skip"
}

AWS > App Mesh > Mesh > Approved

Determine the action to take when an AWS App Mesh mesh is not approved based on AWS > App Mesh > Mesh > Approved > * policies.

The Approved control checks the status of the defined Approved sub-policies for the resource. If the resource is not approved according to any of these policies, this control raises an alarm and takes the defined enforcement action.

For any enforcement actions that specify if new, e.g., Enforce: Delete unapproved if new, this control will only take the enforcement actions for resources created within the last 60 minutes.

See Approved for more information.

URI
tmod:@turbot/aws-appmesh#/policy/types/meshApproved
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Check: Approved",
  "Enforce: Delete unapproved if new"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Approved",
    "Enforce: Delete unapproved if new"
  ],
  "example": [
    "Check: Approved"
  ],
  "default": "Skip"
}

AWS > App Mesh > Mesh > Approved > Regions

A list of AWS regions in which AWS App Mesh meshs are approved for use.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

This policy will be evaluated by the Approved control. If an AWS App Mesh mesh is created in a region that is not in the approved list, it will be subject to the action specified in the AWS > App Mesh > Mesh > Approved policy.

See Approved for more information.

URI
tmod:@turbot/aws-appmesh#/policy/types/meshApprovedRegions
Category
Parent
Targets
Default Template Input
"{\n  regions: policy(uri: \"tmod:@turbot/aws-appmesh#/policy/types/appMeshApprovedRegionsDefault\")\n}\n"
Default Template
"{% if $.regions | length == 0 %} [] {% endif %}{% for item in $.regions %}- &#39;{{ item }}&#39;\n{% endfor %}"
Schema

AWS > App Mesh > Mesh > Approved > Usage

Determine whether the AWS App Mesh mesh is allowed to exist.

This policy will be evaluated by the Approved control. If an AWS App Mesh mesh is not approved, it will be subject to the action specified in the AWS > App Mesh > Mesh > Approved policy.

See Approved for more information.

URI
tmod:@turbot/aws-appmesh#/policy/types/meshApprovedUsage
Category
Parent
Targets
Valid Value
[
  "Not approved",
  "Approved",
  "Approved if AWS > App Mesh > Enabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Not approved",
    "Approved",
    "Approved if AWS > App Mesh > Enabled"
  ],
  "example": [
    "Not approved"
  ],
  "default": "Approved if AWS > App Mesh > Enabled"
}

AWS > App Mesh > Mesh > CMDB

Configure whether to record and synchronize details for the AWS App Mesh mesh into the CMDB.

The CMDB control is responsible for populating and updating all the attributes for that resource type in the Turbot CMDB. All policies and controls in Turbot are based around the resource, so usually the CMDB policy is set to "Enforce: Enabled".

If set to Skip then all changes to the CMDB are paused - no new resources will be discovered, no updates will be made and deleted resources will not be removed.

To cleanup resources and stop tracking changes, set this policy to "Enforce: Disabled".

CMDB controls also use the Regions policy associated with the resource. If region is not in AWS > App Mesh > Mesh > Regions policy, the CMDB control will delete the resource from the CMDB.

(Note: Setting CMDB to "Skip" will also pause these changes.)

URI
tmod:@turbot/aws-appmesh#/policy/types/meshCmdb
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Enforce: Enabled",
  "Enforce: Disabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Enforce: Enabled",
    "Enforce: Disabled"
  ],
  "example": [
    "Skip"
  ],
  "default": "Enforce: Enabled"
}

AWS > App Mesh > Mesh > Regions

A list of AWS regions in which AWS App Mesh meshs are supported for use.

Any meshs in a region not listed here will not be recorded in CMDB.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

URI
tmod:@turbot/aws-appmesh#/policy/types/meshRegions
Category
Parent
Targets
Default Template Input
"{\n  regions: policyValue(uri:\"tmod:@turbot/aws-appmesh#/policy/types/appMeshRegionsDefault\") {\n    value\n  }\n}\n"
Default Template
"{% if $.regions.value | length == 0 %} [] {% endif %}{% for item in $.regions.value %}- &#39;{{ item }}&#39;\n{% endfor %}"
Schema

AWS > App Mesh > Mesh > Tags

Determine the action to take when an AWS App Mesh mesh tags are not updated based on the AWS > App Mesh > Mesh > Tags > * policies.

The control ensure AWS App Mesh mesh tags include tags defined in AWS > App Mesh > Mesh > Tags > Template.

Tags not defined in Mesh Tags Template will not be modified or deleted. Setting a tag value to undefined will result in the tag being deleted.

See Tags for more information.

URI
tmod:@turbot/aws-appmesh#/policy/types/meshTags
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Check: Tags are correct",
  "Enforce: Set tags"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Tags are correct",
    "Enforce: Set tags"
  ],
  "example": [
    "Check: Tags are correct"
  ],
  "default": "Skip"
}

AWS > App Mesh > Mesh > Tags > Template

The template is used to generate the keys and values for AWS App Mesh mesh.

Tags not defined in Mesh Tags Template will not be modified or deleted. Setting a tag value to undefined will result in the tag being deleted.

See Tags for more information.

URI
tmod:@turbot/aws-appmesh#/policy/types/meshTagsTemplate
Category
Parent
Targets
Default Template Input
[
  "{\n  account {\n    turbot {\n      id\n    }\n  }\n}\n",
  "{\n  defaultTags: policyValue(uri:\"tmod:@turbot/aws-appmesh#/policy/types/appMeshTagsTemplate\" resourceId: \"{{ $.account.turbot.id }}\") {\n    value\n  }\n}\n"
]
Default Template
"{%- if $.defaultTags.value | length == 0 %} [] {%- elif $.defaultTags.value != undefined %}{{ $.defaultTags.value | dump | safe }}{%- else %}{% for item in $.defaultTags.value %}- {{ item }}{% endfor %}{% endif %}"
Schema

AWS > App Mesh > Mesh > Usage

Configure the number of AWS App Mesh meshs that can be used for this account and the current consumption against the limit.

You can configure the behavior of the control with this AWS > App Mesh > Mesh > Usage policy.

URI
tmod:@turbot/aws-appmesh#/policy/types/meshUsage
Category
Parent
Targets
Valid Value
[
  "Skip",
  "Check: Usage <= 85% of Limit",
  "Check: Usage <= 100% of Limit"
]
Schema
{
  "type": "string",
  "enum": [
    "Skip",
    "Check: Usage <= 85% of Limit",
    "Check: Usage <= 100% of Limit"
  ],
  "example": [
    "Check: Usage <= 85% of Limit"
  ],
  "default": "Skip"
}

AWS > App Mesh > Mesh > Usage > Limit

Maximum number of items that can be created for this account.

URI
tmod:@turbot/aws-appmesh#/policy/types/meshUsageLimit
Category
Parent
Targets
Schema
{
  "type": "integer",
  "minimum": 0,
  "default": 15
}

AWS > App Mesh > Permissions

Configure whether permissions policies are in effect for AWS App Mesh.

This setting does not affect account level permissions (AWS/Admin, AWS/Owner, etc)

Note: The behavior of this policy depends on the value of AWS > Permissions.

URI
tmod:@turbot/aws-appmesh#/policy/types/appMeshPermissions
Category
Parent
Targets
Valid Value
[
  "Enabled",
  "Disabled",
  "Enabled if AWS > App Mesh > Enabled & AWS > App Mesh > API Enabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Enabled",
    "Disabled",
    "Enabled if AWS > App Mesh > Enabled & AWS > App Mesh > API Enabled"
  ],
  "example": [
    "Enabled"
  ],
  "default": "Enabled if AWS > App Mesh > Enabled & AWS > App Mesh > API Enabled"
}

AWS > App Mesh > Permissions > Levels

Define the permissions levels that can be used to grant access to an AWS account. Permissions levels defined will appear in the UI to assign access to Turbot users. This policy provides a default for Permissions > Levels in each service, however you can explicitly override the setting for each service if desired

URI
tmod:@turbot/aws-appmesh#/policy/types/appMeshPermissionsLevels
Category
Parent
Targets
Default Template Input
[
  "{\n  item: account {\n    turbot{\n      id\n    }\n  }\n}\n",
  "{\n  availableLevels: policyValues(filter:\"policyTypeLevel:self resourceId:{{ $.item.turbot.id }} policyType:'tmod:@turbot/aws-iam#/policy/types/permissionsLevelsDefault'\") {\n    items {\n      value\n    }\n  }\n}\n"
]
Default Template
"{% if $.availableLevels.items[0].value | length == 0 %} [] {% endif %}{% for item in $.availableLevels.items[0].value %}- {{ item }}\n{% endfor %}"
Schema
{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "Metadata",
      "ReadOnly",
      "Operator",
      "Admin",
      "Owner"
    ]
  }
}

AWS > App Mesh > Permissions > Levels > Modifiers

A map of AWS API to Turbot Permission Level used to customize Turbot's standard permissions. You can add, remove or redefine the mapping of AWS API operations to Turbot permissions levels here.

Note: Modifiers are cumulative - if you add a permission to the Metadata level, it is also added to ReadOnly, Operator and Admin. Modifier policies set here apply ONLY to the AWS level

example:
  - &quot;glacier:createvault&quot;: admin
  - &quot;glacier:ListVaults&quot;: metadata
  - &quot;s3:DeleteBucket&quot;: none
URI
tmod:@turbot/aws-appmesh#/policy/types/appMeshPermissionsLevelsModifiers
Category
Parent
Targets
Schema

AWS > App Mesh > Permissions > Lockdown

URI
tmod:@turbot/aws-appmesh#/policy/types/appMeshPermissionsLockdown
Category
Parent
Targets

AWS > App Mesh > Permissions > Lockdown > API Boundary

Configure whether the AWS appMesh API is enabled for all users and roles in turbot-managed boundary policies.

Note: Disabling the service disables the API for ALL users and roles, and Turbot will have no access to the API.

URI
tmod:@turbot/aws-appmesh#/policy/types/appMeshPermissionsLockdownApiBoundary
Category
Parent
Targets
Valid Value
[
  "Enabled if AWS > App Mesh > API Enabled"
]
Schema
{
  "type": "string",
  "enum": [
    "Enabled if AWS > App Mesh > API Enabled"
  ],
  "example": [
    "Enabled if AWS > App Mesh > API Enabled"
  ],
  "default": "Enabled if AWS > App Mesh > API Enabled"
}

AWS > App Mesh > Regions

A list of AWS regions in which AWS App Mesh resources are supported for use.

The expected format is an array of regions names. You may use the '*' and '?' wildcard characters.

This policy is the default value for all AWS App Mesh resources' Regions policies.

URI
tmod:@turbot/aws-appmesh#/policy/types/appMeshRegionsDefault
Category
Parent
Targets
Schema
{
  "allOf": [
    {
      "$ref": "aws#/definitions/regionNameMatcherList"
    },
    {
      "default": [
        "ap-east-1",
        "ap-northeast-1",
        "ap-northeast-2",
        "ap-south-1",
        "ap-southeast-1",
        "ap-southeast-2",
        "ca-central-1",
        "eu-central-1",
        "eu-north-1",
        "eu-west-1",
        "eu-west-2",
        "eu-west-3",
        "me-south-1",
        "sa-east-1",
        "us-east-1",
        "us-east-2",
        "us-west-1",
        "us-west-2"
      ]
    }
  ]
}

AWS > App Mesh > Tags Template [Default]

A template used to generate the keys and values for AWS App Mesh resources.

By default, all App Mesh resource Tags > Template policies will use this value.

URI
tmod:@turbot/aws-appmesh#/policy/types/appMeshTagsTemplate
Category
Parent
Targets
Default Template Input
"{\n  defaultTags: policyValue(uri:\"tmod:@turbot/aws#/policy/types/defaultTagsTemplate\") {\n    value\n  }\n}\n"
Default Template
"{%- if $.defaultTags.value | length == 0 %} [] {%- elif $.defaultTags.value != undefined %}{{ $.defaultTags.value | dump | safe }}{%- else %}{% for item in $.defaultTags.value %}- {{ item }}{% endfor %}{% endif %}"
Schema

AWS > Turbot > Event Handlers > Events > Rules > Event Sources > @turbot/aws-appmesh

AWS App Mesh CloudWatch Events event sources for the Turbot Event Handlers.

URI
tmod:@turbot/aws-appmesh#/policy/types/appMeshEventSources
Category
Parent
Targets
Schema
{
  "type": "array",
  "items": {
    "type": "string"
  },
  "default": [
    "aws.appmesh"
  ]
}

AWS > Turbot > Permissions > Compiled > API Boundary > @turbot/aws-appmesh

A read-only policy generated by Turbot that lists the APIs that should be added to the turbot-managed (hard) boundary policy, thereby enabling them to be assigned to users and roles. This value will change depending on the value of the value of the AWS > App Mesh > Permissions > Lockdown > API Boundary policy

URI
tmod:@turbot/aws-appmesh#/policy/types/awsCompiledApiBoundary
Category
Parent
Targets
Schema
{
  "type": "array"
}

AWS > Turbot > Permissions > Compiled > Levels > @turbot/aws-appmesh

A calculated policy that Turbot uses to create a compiled list of ALL permissions for AWS App Mesh that is used as input to the stack that manages the Turbot IAM permissions objects.

URI
tmod:@turbot/aws-appmesh#/policy/types/awsLevelsCompiled
Category
Parent
Targets
Schema

AWS > Turbot > Permissions > Compiled > Service Permissions > @turbot/aws-appmesh

A calculated policy that Turbot uses to create a compiled list of ALL permissions for AWS App Mesh that is used as input to the control that manages the IAM stack.

URI
tmod:@turbot/aws-appmesh#/policy/types/awsCompiledServicePermissions
Category
Parent
Targets
Schema